Sie haben keine Artikel im Warenkorb.
Suchergebnisse für 'adafruit'
-
Adafruit ATtiny817 Breakout with seesaw - STEMMA QT / Qwiic
Three in One: ATtiny817 is, Adafruit seesaw + STEMMA QT Erfahren Sie mehr -
NeoPixel Digital RGB 'Fairy LED' 100 LED 10M - WS2812
Der etwas andere Neopixel-LED-Strip, z.b. als Weihnachtsbeleuchtung. 10M mit 100LED Erfahren Sie mehr -
Adafruit NeoPixel RGB Neon-like LED Flex Strip with Silicone Tube - 1 meter
You love NeoPixels, and you love silicone diffusion? Peep this NeoPixel RGB Neon-like LED Flex Strip with Silicone Tubing! Erfahren Sie mehr -
Adafruit PCF8523 Real Time Clock Breakout Board - STEMMA QT / Qwiic
This is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is reprogrammed, or if the power is lost. Perfect for data-logging, clock-building, time stamping, timers, and alarms, et Erfahren Sie mehr -
Adafruit DS3231 Precision RTC - STEMMA QT
This Real Time Clock (RTC) is the most precise you can get in a small, low-power package. Erfahren Sie mehr -
Electret Microphone Amplifier - MAX4466 with Adjustable Gain
Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. Erfahren Sie mehr -
Adafruit Feather RP2040
This Feather features the RP2040, and all niceties you know and love about Feather Erfahren Sie mehr -
Adafruit QT Py RP2040
What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite chip, the RP2040. It's been made famous in the new Raspberry Pi Pico and our Feather RP2040 and ItsyBitsy RP2040, but what if we wanted something really smol? Erfahren Sie mehr -
Adafruit ItsyBitsy RP2040
Featuring the Raspberry Pi RP2040! Small, powerful, with a ultra fast dual Cortex M0+ processor running at 125 MHz Erfahren Sie mehr -
Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout - STEMMA QT / Qwiic
The MCP9808 digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard I2C. Erfahren Sie mehr -
Adafruit HTU31 Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic
The HTU31-D is the third generation of temperature-humidity sensors from TE and great for sensing temperature and humidity, with excellent specifications. Erfahren Sie mehr -
Adafruit NeoKey Trinkey - USB NeoPixel Mechanical Key Switch
It's half USB Key, half Adafruit Trinket, half mechanical keeb...it's NeoKey Trinkey, the circuit board with a Trinket M0 heart, a NeoPixel glow, and a Cherry MX-compatible. Erfahren Sie mehr -
Adafruit TMP117 ±0.1°C High Accuracy I2C Temperature Sensor
The TMP117 Precision Temperature Sensor is an I2C temperature sensor that will help you easily add temperature measurement and adjustment to your project. Erfahren Sie mehr -
Adafruit LPS35HW Water Resistant Pressure Sensor - STEMMA QT
The ST LPS35HW is a water resistant barometric pressure and temperature sensor that is also safe to use in wet environments. The sensing element is nestled safely in a ceramic package and is encased in a waterproof gel that prevents water that gets into the sensor from interfering with readings. Erfahren Sie mehr -
Adafruit AirLift – ESP32 WiFi Co-Processor Breakout Board
Give your plain ol' microcontroller project a lift with the Adafruit AirLift - a breakout board that lets you use the powerful ESP32 as a WiFi co-processor. Erfahren Sie mehr -
Adafruit AW9523 GPIO Expander and LED Driver Breakout
Expand your project possibilities, with the Adafruit AW9523 GPIO Expander and LED Driver Breakout - a cute and powerful I2C expander with a lot of tricks up its sleeve. Erfahren Sie mehr -
Adafruit PyBadge LC - MakeCode Arcade, CircuitPython, or Arduino - Low Cost Version
What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino even when you're on a budget? That's right, it's the Adafruit PyBadge LC! Erfahren Sie mehr -
Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731
The IS31FL3731 will let you get back to that classic LED matrix look, with a nice upgrade! Erfahren Sie mehr -
Adafruit TPS62827 3.3V Buck Converter Breakout - 3.3V Output 2 Amp Max
This little buck converter based on the TPS62827 is super handy, taking up to 5.5V input and providing a 3.3V output with up to 2A current. Erfahren Sie mehr -
Adafruit BMP388 - Precision Barometric Pressure and Altimeter - STEMMA QT
The BMP3xx is the next-generation of sensors from Bosch and is the upgrade to the BMP280 - with a low altitude noise as low as 0.1m and the same fast conversion time. Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-28 or TSSOP-28 - 3 Pack!
One side has a 28-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 28-SOIC. Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-16 or TSSOP-16 - 3 Pack!
One side has a 16-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 16-SOIC. Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-8, MSOP-8 or TSSOP-8 - 6 Pack!
One side has a 8-TSSOP/8-MSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 8-SOIC Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-20 or TSSOP-20 - 3 Pack!
One side has a 20-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 20-SOIC. Erfahren Sie mehr -
Adafruit LTR390 UV Light Sensor - STEMMA QT / Qwiic
The LTR390 is one of the few low-cost UV sensors available, and it's a pretty nice one! With both ambient light and UVA sensing with a peak spectral response between 300 and 350nm. You can use it for measuring how much sun you can get before needing to covering up. Erfahren Sie mehr -
Adafruit PyBadge for MakeCode Arcade, CircuitPython or Arduino
What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino? That's right, its the Adafruit PyBadge! Erfahren Sie mehr -
Adafruit LSM6DSO32 6-DoF Accelerometer and Gyroscope - STEMMA QT / Qwiic
This lil IMU is like a big sister to the LSM6DSOX, it has the same pin out and firmware - but the accelerometer component can go up to 32g instead of the normal 16g maximum. Erfahren Sie mehr -
Adafruit LTC4311 I2C Extender / Active Terminator - STEMMA QT / Qwiic
You can now achieve much faster data rates without having to noodle with resistors, and over long cables. Erfahren Sie mehr -
MPM3610 5V Buck Converter Breakout - 21V In 5V Out at 1.2A
This little buck converter based on the MPM3610 is a marvel, taking up to 21V input and providing a 5V output with up to 1.2A current. Erfahren Sie mehr -
Adafruit AP3429A/TLV62569 3.3V Buck Converter Breakout - 3.3V Output 1.2A Max
This little buck converter based on the AP3429A is super handy, taking up to 5.5V input and providing a 3.3V output with up to 1.2A current. Erfahren Sie mehr