Sie haben keine Artikel im Warenkorb.
Suchergebnisse für 'pin'
-
Adafruit 0.56" 4-Digit 7-Segment Display - w/ I2C Backpack QT - Rot
Steuern Sie diese kaskadierbare 4-stellige 7-Segment-Anzeige mit I2C-Backpack - nur 2 I/O-Pins erforderlich! Erfahren Sie mehr -
Adafruit 0.56" 4-Digit 7-Segment Display - w/ I2C Backpack QT - Grün
Steuern Sie diese kaskadierbare 4-stellige 7-Segment-Anzeige mit I2C-Backpack - nur 2 I/O-Pins erforderlich! Erfahren Sie mehr -
Adafruit ESP32 Feather V2 - 8MB Flash + 2 MB PSRAM - STEMMA QT
A complete redesign of the HUZZAH32 ESP32 Feather Erfahren Sie mehr -
Adafruit Adafruit Audio FX Sound Board + 2x2W Amp - WAV/OGG Trigger -16MB
The Sound Board has a lot of amazing features that make it the easiest thing ever Erfahren Sie mehr -
Adafruit VL53L4CX Time of Flight Distance Sensor - ~1 to 6000mm - STEMMA QT / Qwiic
The Adafruit VL53L4CX Time of Flight Sensor is another great Time of Flight distance sensor from ST in the VL5 series of chips, this one is great for long distances - it goes up to 6 meters compared with 4 meter max of the VL53L1X. Erfahren Sie mehr -
Adafruit ESP32-S3 Feather with STEMMA QT / Qwiic - 8MB Flash No PSRAM
The ESP32-S3 has arrived in Feather format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this Feather is great for powering your IoT projects. Erfahren Sie mehr -
Adafruit Ultimate GPS Breakout with GLONASS + GPS - PA1616D - 99 channel w/10 Hz updates
This version of the Ultimate GPS is even MORE Ultimate, with support for more GPS-like networks such as GLONASS, for even more coverage worldwide. It uses a slightly taller module than our classic Ultimate GPS, and uses a little more power. Otherwise its almost identical in functionality Erfahren Sie mehr -
Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing Warm White
FeatherWing mit 7 x 15 LEDs für alle Adafruit Feather Boards Erfahren Sie mehr -
ADXL343 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI - STEMMA QT / Qwiic
The sensor has three axes of measurements, X Y Z, and pins that can be used either as I2C or SPI digital interfacing. You can set the sensitivity level to either +-2g, +-4g, +-8g or +-16g. Erfahren Sie mehr -
Adafruit ESP32-S2 Feather with BME280 Sensor - STEMMA QT - 4MB Flash + 2 MB PSRAM
The new Adafruit ESP32-S2 Feather with BME280 temperature/humidity/pressure sensor built right in! Erfahren Sie mehr -
Adafruit MSA311 Triple Axis Accelerometer - STEMMA QT / Qwiic
The MSA311 is a super small and low-cost triple-axis accelerometer. It's inexpensive, but has just about every 'extra' you'd want in an accelerometer. Erfahren Sie mehr -
Adafruit ATtiny817 Breakout with seesaw - STEMMA QT / Qwiic
Three in One: ATtiny817 is, Adafruit seesaw + STEMMA QT Erfahren Sie mehr -
Adafruit NeoPixel RGB Neon-like LED Flex Strip with Silicone Tube - 1 meter
You love NeoPixels, and you love silicone diffusion? Peep this NeoPixel RGB Neon-like LED Flex Strip with Silicone Tubing! Erfahren Sie mehr -
Adafruit PCF8523 Real Time Clock Breakout Board - STEMMA QT / Qwiic
This is a great battery-backed real time clock (RTC) that allows your microcontroller project to keep track of time even if it is reprogrammed, or if the power is lost. Perfect for data-logging, clock-building, time stamping, timers, and alarms, et Erfahren Sie mehr -
Adafruit DS3231 Precision RTC - STEMMA QT
This Real Time Clock (RTC) is the most precise you can get in a small, low-power package. Erfahren Sie mehr -
Electret Microphone Amplifier - MAX4466 with Adjustable Gain
Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. Erfahren Sie mehr -
Adafruit Feather RP2040
This Feather features the RP2040, and all niceties you know and love about Feather Erfahren Sie mehr -
Adafruit QT Py RP2040
What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite chip, the RP2040. It's been made famous in the new Raspberry Pi Pico and our Feather RP2040 and ItsyBitsy RP2040, but what if we wanted something really smol? Erfahren Sie mehr -
Adafruit ItsyBitsy RP2040
Featuring the Raspberry Pi RP2040! Small, powerful, with a ultra fast dual Cortex M0+ processor running at 125 MHz Erfahren Sie mehr -
Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout - STEMMA QT / Qwiic
The MCP9808 digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard I2C. Erfahren Sie mehr -
Adafruit HTU31 Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic
The HTU31-D is the third generation of temperature-humidity sensors from TE and great for sensing temperature and humidity, with excellent specifications. Erfahren Sie mehr -
Adafruit NeoKey Trinkey - USB NeoPixel Mechanical Key Switch
It's half USB Key, half Adafruit Trinket, half mechanical keeb...it's NeoKey Trinkey, the circuit board with a Trinket M0 heart, a NeoPixel glow, and a Cherry MX-compatible. Erfahren Sie mehr -
Adafruit TMP117 ±0.1°C High Accuracy I2C Temperature Sensor
The TMP117 Precision Temperature Sensor is an I2C temperature sensor that will help you easily add temperature measurement and adjustment to your project. Erfahren Sie mehr -
Adafruit LPS35HW Water Resistant Pressure Sensor - STEMMA QT
The ST LPS35HW is a water resistant barometric pressure and temperature sensor that is also safe to use in wet environments. The sensing element is nestled safely in a ceramic package and is encased in a waterproof gel that prevents water that gets into the sensor from interfering with readings. Erfahren Sie mehr -
Adafruit AirLift – ESP32 WiFi Co-Processor Breakout Board
Give your plain ol' microcontroller project a lift with the Adafruit AirLift - a breakout board that lets you use the powerful ESP32 as a WiFi co-processor. Erfahren Sie mehr -
Adafruit AW9523 GPIO Expander and LED Driver Breakout
Expand your project possibilities, with the Adafruit AW9523 GPIO Expander and LED Driver Breakout - a cute and powerful I2C expander with a lot of tricks up its sleeve. Erfahren Sie mehr -
Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731
The IS31FL3731 will let you get back to that classic LED matrix look, with a nice upgrade! Erfahren Sie mehr -
Adafruit TPS62827 3.3V Buck Converter Breakout - 3.3V Output 2 Amp Max
This little buck converter based on the TPS62827 is super handy, taking up to 5.5V input and providing a 3.3V output with up to 2A current. Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-28 or TSSOP-28 - 3 Pack!
One side has a 28-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 28-SOIC. Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-16 or TSSOP-16 - 3 Pack!
One side has a 16-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 16-SOIC. Erfahren Sie mehr