Suchergebnisse für 'ic'
-
KEYES Logic Level Converter 4-Kanal
Unidirektionaler Level Converter 3.3V <-> 5V
Erfahren Sie mehr -
Adafruit TMP117 ±0.1°C High Accuracy I2C Temperature Sensor
The TMP117 Precision Temperature Sensor is an I2C temperature sensor that will help you easily add temperature measurement and adjustment to your project. Erfahren Sie mehr -
Adafruit LPS35HW Water Resistant Pressure Sensor - STEMMA QT
The ST LPS35HW is a water resistant barometric pressure and temperature sensor that is also safe to use in wet environments. The sensing element is nestled safely in a ceramic package and is encased in a waterproof gel that prevents water that gets into the sensor from interfering with readings. Erfahren Sie mehr -
Adafruit AirLift – ESP32 WiFi Co-Processor Breakout Board
Give your plain ol' microcontroller project a lift with the Adafruit AirLift - a breakout board that lets you use the powerful ESP32 as a WiFi co-processor. Erfahren Sie mehr -
Adafruit AW9523 GPIO Expander and LED Driver Breakout
Expand your project possibilities, with the Adafruit AW9523 GPIO Expander and LED Driver Breakout - a cute and powerful I2C expander with a lot of tricks up its sleeve. Erfahren Sie mehr -
Adafruit PyBadge LC - MakeCode Arcade, CircuitPython, or Arduino - Low Cost Version
What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino even when you're on a budget? That's right, it's the Adafruit PyBadge LC! Erfahren Sie mehr -
SparkFun Thing Plus - ESP32-S2 WROOM
The SparkFun ESP32-S2 WROOM Thing Plus is a highly-integrated, Feather form-factor development board equipped with a 2.4 GHz WiFi System-on-Chip (SoC), from Espressif. Erfahren Sie mehr -
Weitwinkel-Kamera (222 Grad) für den Raspberry Pi / IR
Die perfekte Kamera zur Raumüberwachung mit Fischaugenobjektiv mit einem Winkel von 222 Grad / IR Erfahren Sie mehrRegulärer Preis: CHF 49.90
Special Price CHF 45.90
-
Silikon Lötunterlage, Hitzebeständig / Antistatisch, 45cm x 30cm
Hitzebeständige Lötunterlage inkl. Einbuchtungen für Schrauben, Bauteile etc. Erfahren Sie mehr -
Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731
The IS31FL3731 will let you get back to that classic LED matrix look, with a nice upgrade! Erfahren Sie mehr -
Adafruit TPS62827 3.3V Buck Converter Breakout - 3.3V Output 2 Amp Max
This little buck converter based on the TPS62827 is super handy, taking up to 5.5V input and providing a 3.3V output with up to 2A current. Erfahren Sie mehr -
Adafruit BMP388 - Precision Barometric Pressure and Altimeter - STEMMA QT
The BMP3xx is the next-generation of sensors from Bosch and is the upgrade to the BMP280 - with a low altitude noise as low as 0.1m and the same fast conversion time. Erfahren Sie mehr -
Widerstands-Sortiment 20 Stk. x 7 Werte / 140 Stk.
Set mit je 20 Widerstädnen 20 x 7 = 140 Widerstände Material: Kupfer, ROHS
Erfahren Sie mehr -
10 Stk. LED Pink im Transparenten Gehäuse / 5mm
10 Stk. LED Gehäusefarbe Weiss / Lichtfarbe Pink / 5mm
Erfahren Sie mehr
Helligkeit: 1500 - 2000mcd -
10 Stk. LED Pink im Transparenten Gehäuse / 3mm
10 Stk. LED Gehäusefarbe Weiss / Lichtfarbe Pink / 3mm
Erfahren Sie mehr
Helligkeit: 1500 - 2000mcd -
Adafruit SMT Breakout PCB for SOIC-28 or TSSOP-28 - 3 Pack!
One side has a 28-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 28-SOIC. Erfahren Sie mehr -
Pimoroni Picade – 10-inch display with PICO-8
The ultimate desktop retro arcade machine! Picade is a Raspberry Pi-powered mini arcade that you build yourself! Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-16 or TSSOP-16 - 3 Pack!
One side has a 16-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 16-SOIC. Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-8, MSOP-8 or TSSOP-8 - 6 Pack!
One side has a 8-TSSOP/8-MSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 8-SOIC Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-20 or TSSOP-20 - 3 Pack!
One side has a 20-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 20-SOIC. Erfahren Sie mehr -
MPI 7" 1024×600 IPS TFT-Screen mit Multitouch
Grosser 7" IPS TFT-Screen mit einer Auflösung von 1024x600 Bildpunkten, mit Multitouch
Erfahren Sie mehr -
MPI 10.1" 1024×600 IPS TFT-Screen mit Multitouch
Grosser 10.1" IPS TFT-Screen mit einer Auflösung von 1024x600 Bildpunkten, mit Multitouch
Erfahren Sie mehrCHF 119.90 -
Aluminium-Gehäuse (Matt schwarz) mit Dual Cooler für Raspberry Pi 4B
Sehr schönes Heavy-Duty-Alu-Gehäuse mit perfekter Wärmeableitung für den Raspberry Pi4 B. Inkl. Ventillator Erfahren Sie mehrRegulärer Preis: CHF 32.90
Special Price CHF 19.90
-
Half-Size Acryl-Montageplatte für Raspberry Pi3 B und B+
Acryl-Montageplatte für Raspberry Pi3 B und B+ für Half-Size-Breadboard Erfahren Sie mehrRegulärer Preis: CHF 6.90
Special Price CHF 5.90
-
BBC micro:bit Breakout Board
Prototyping-Erweiterung für das BBC micro:bit - Bricht alle IO auf PinHeader aus Erfahren Sie mehr -
ABS-Gehäuse mit Ventilator * schwarz * für Raspberry Pi4 Model B
ABS-Gehäuse mit Ventilator * schwarz * für Raspberry Pi4 Model B Erfahren Sie mehrRegulärer Preis: CHF 19.90
Special Price CHF 9.90
-
Adafruit LTR390 UV Light Sensor - STEMMA QT / Qwiic
The LTR390 is one of the few low-cost UV sensors available, and it's a pretty nice one! With both ambient light and UVA sensing with a peak spectral response between 300 and 350nm. You can use it for measuring how much sun you can get before needing to covering up. Erfahren Sie mehr -
Adafruit PyBadge for MakeCode Arcade, CircuitPython or Arduino
What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino? That's right, its the Adafruit PyBadge! Erfahren Sie mehr -
ABS Gehäuse für Arduino UNO * schwarz *
Schützen Sie Ihren Arduino UNO mit diesem stabilen ABS-Gehäuse* schwarz * Erfahren Sie mehr -
Raspberry Pi 4 Case Fan
The Raspberry Pi 4 Case Fan works with Raspberry Pi 4 and the Raspberry Pi 4 Case. Erfahren Sie mehr
