Suchergebnisse für 'el wire'
-
SparkFun Flexible Qwiic Cable - 200mm
This is a 200mm long 4-conductor cable with 1mm JST termination. Erfahren Sie mehr -
SparkFun Flexible Qwiic Cable - 500mm
This is a 500mm long 4-conductor cable with 1mm JST termination. Erfahren Sie mehr -
SparkFun Qwiic Cable Kit
The SparkFun Qwiic Cable Kit includes 10 cables of various lengths and styles that will get your Qwiic boards connected together, to a development platform, or to a breadboard. Erfahren Sie mehr -
Nextion Intelligent - 5.0" HMI LCD MultiTouch Display mit Gehäuse
Intelligentes, programmierbares HMI-Display, speziell entwickelt für den Arduino und den Raspberry Pi. Intelligent-Series mit Animationssupport, RTC, Flash-Speicher, GPIO-Support und schnellerer CPU. Mit Gehäuse Erfahren Sie mehrCHF 119.90 -
Verbindungsstecker mit Kabel JST-SM / 3Pin / Male 10CM
Verbindungsstecker mit Kabel JST-SM / 3Pin / Male 10CM , Tinned copper wire, 20AWG ROHS
Erfahren Sie mehr -
Verbindungsstecker mit Kabel JST XH2.54mm auf Dupont Female / 5Pin / Female 25CM
Verbindungsstecker mit Kabel JST XH2.54mm auf Dupont Female / 5Pin / Female 25CM,Material: Tinned copper wire,ROHS Erfahren Sie mehr -
SparkFun OpenScale
The SparkFun OpenScale is a simple-to-use, open source solution for measuring weight and temperature. Erfahren Sie mehr -
Adafruit TMP117 ±0.1°C High Accuracy I2C Temperature Sensor
The TMP117 Precision Temperature Sensor is an I2C temperature sensor that will help you easily add temperature measurement and adjustment to your project. Erfahren Sie mehr -
Adafruit LPS35HW Water Resistant Pressure Sensor - STEMMA QT
The ST LPS35HW is a water resistant barometric pressure and temperature sensor that is also safe to use in wet environments. The sensing element is nestled safely in a ceramic package and is encased in a waterproof gel that prevents water that gets into the sensor from interfering with readings. Erfahren Sie mehr -
Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731
The IS31FL3731 will let you get back to that classic LED matrix look, with a nice upgrade! Erfahren Sie mehr -
Jumperkabel (20cm) M/M 10 Stk. - 24AWG
Set besteht aus:
Erfahren Sie mehr
10 Stk. Jumper Kabel M/M (20cm), Tinned copper wire, 24AWG 11/0.16mm OD: 1.4MM ROHS -
SparkFun IoT Starter Kit with Blynk Board
The SparkFun IoT Starter Kit with Blynk Board is a great way to gain a solid introduction to the world of Internet of Things (IoT) technology without any difficult programming. Erfahren Sie mehr -
Adafruit LSM6DSO32 6-DoF Accelerometer and Gyroscope - STEMMA QT / Qwiic
This lil IMU is like a big sister to the LSM6DSOX, it has the same pin out and firmware - but the accelerometer component can go up to 32g instead of the normal 16g maximum. Erfahren Sie mehr -
Adafruit LTC4311 I2C Extender / Active Terminator - STEMMA QT / Qwiic
You can now achieve much faster data rates without having to noodle with resistors, and over long cables. Erfahren Sie mehr -
Adafruit Micro SD SPI or SDIO Card Breakout Board - 3V ONLY!
MicroSD Breakout mit SPI und SPI, nur für 3V Erfahren Sie mehr -
Jumperkabel 40 Stk. F/F - 15CM - 24AWG
Set besteht aus: 40 Stk. Jumperkabel,F/F (Female/Female),Länge: 15cm, Tinned copper wire, 24AWG 11/0.16mm OD: 1.4MM ROHS
Erfahren Sie mehr -
Jumperkabel 40 Stk. M/M - 15CM - 24AWG
Jumperkabel 40 Stk. M/M Verbindungskabel - 15CM, Tinned copper wire, 24AWG 11/0.16mm OD: 1.4MM ROHS
Erfahren Sie mehr -
Jumperkabel 40 Stk. M/F - 15CM - 24AWG
Set besteht aus: 40 Stk. Jumperkabel,M/F(Male/Female) ,Länge: 15cm ,Tinned copper wire, 24AWG 11/0.16mm OD: 1.4MM ROHS
Erfahren Sie mehr -
Verbindungsstecker mit Kabel JST 1.25mm / 2Pin / Female 20CM
Verbindungsstecker mit Kabel 1.25mm / 2Pin / Female/20cm, Tinned copper wire, 26AWG Erfahren Sie mehr -
Jumperkabel 10 Stk. M/M - 10CM - 22AWG - Blau
Set besteht aus: 10 Stk. Jumperkabel,M/M (Male/Male),Länge: 10cm ,Tinned copper wire, 22AWG 17/0.16mm OD: 1.6MM ROHS
Erfahren Sie mehr -
Jumperkabel 10 Stk. M/M - 10CM - 22AWG - Rot
Set besteht aus: 10 Stk. Jumperkabel,M/M (Male/Male),Länge: 10cm ,Tinned copper wire, 22AWG 17/0.16mm OD: 1.6MM ROHS
Erfahren Sie mehr -
Jumperkabel 10 Stk. M/M - 10CM - 22AWG - Schwarz
Set besteht aus: 10 Stk. Jumperkabel,M/M (Male/Male),Länge: 10cm ,Tinned copper wire, 22AWG 17/0.16mm OD: 1.6MM ROHS
Erfahren Sie mehr -
80 Stk. Lötkabel, fertig abisoliert und verzinnt in 4 Längen
80 Stk. Lötkabel, fertig abisoliert und verzinnt in 4 Längen,Tinned copper wire, UL1007 22AWG 17stk copper wire / 0.16mm, OD: 1.6MM ROHS,
Erfahren Sie mehr -
40 Stk. Lötkabel, fertig abisoliert und verzinnt in 4 Längen
40 Stk. Lötkabel, fertig abisoliert und verzinnt in 4 Längen,Tinned copper wire, UL1007 22AWG 17stk copper wire / 0.16mm, OD: 1.6MM ROHS,
Erfahren Sie mehr -
Verbindungskabel F/F 3Pin auf 3Pin einzeln - 30cm - 26AWG
F/F Verbindungskabel 3Pin auf 3Pin einzeln, 30cm, Farbkodiert, Tinned copper wire, 26AWG Erfahren Sie mehr -
Adafruit RGB Matrix Shield for Arduino
If you've got an Arduino-compatible board, this shield will make usage of an RGB-Matrix a snap Erfahren Sie mehr -
NeoPixel Digital RGB LED Strip 144 LED 1M Weiss PCB - WS2813
We crammed ALL THE NEOPIXELS into this strip! An unbelievable 144 individually-controllable LED pixels on a flexible PCB. With 2813 Neopixels Erfahren Sie mehr -
NeoPixel Digital RGB LED Strip 144 LED 1M Black PCB - WS2813
We crammed ALL THE NEOPIXELS into this strip! An unbelievable 144 individually-controllable LED pixels on a flexible, black PCB. WS2813 Neopixel. Erfahren Sie mehr -
2.0" 320x240 Color IPS TFT Display + microSD Breakout
Dieses wunderschöne IPS-Display-Breakout ist der beste Weg, jedem Projekt ein kleines, farbenfrohes und helles Display mit ausgezeichneter Sichtbarkeit aus jedem Winkel hinzuzufügen. Erfahren Sie mehr -
Original Arduino Nano 33 IoT
Die einfache Handhabung eines Nano-Boards mit sicherer IoT- und BT-Konnektivität. Erfahren Sie mehr
