Sie haben keine Artikel im Warenkorb.
Breakout Boards

-
OEM Single Button Breakout Board
OEM Single Button Breakout Board Erfahren Sie mehr -
Play-Zone Breakout Board für XBee-Module inkl. Headers
Play-Zone Breakout Board für XBee-Module inkl. 2.00mm und 2.54mm Headers
Erfahren Sie mehr -
Play-Zone Logic Level Converter Bi-Directional 8-Kanal
Biirektionaler Level Converter 8 Kanal 3.3V <-> 5V (oder 1.8 <-> 2.8) von Play-Zone
Erfahren Sie mehr -
Play-Zone RJ45-Breakout inkl. RJ45-Buchse
8-Pin RJ45 Breakout inkl. Buchse,ROHS Erfahren Sie mehr -
PN532 NFC/RFID controller breakout board - with Tag
The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. Erfahren Sie mehr -
Pololu ACS711EX Current Sensor Carrier -31A to +31A
This board is a simple carrier of Allegro’s ±31 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~0.6 mΩ) current path and electrical isolation up to 100 V. Erfahren Sie mehr -
RGB-LED Breakout Board
Breakout Board mit SMD RGB-LED (Common Cathode) Erfahren Sie mehr -
Solarbotics Nunchucky (Wii Nunchuck breakout adapter)
Breakout Board für den Nintendo Wii Nunchuck Controller Erfahren Sie mehr -
SparkFun 3.5mm Klinkenbuchse Breakout (TRRS)
Dieses Breakout führt alle 4 Leitungen (Sleeve, Ring2, Ring 1, Ground) von 3.5mm Klingensteckern auf 2.54mm / 0.1" Header raus. Erfahren Sie mehr -
SparkFun 6DoF IMU Breakout - LSM6DSV16X (Qwiic)
Looking for an extremely accurate way to detect motion utilizing AI? We've got you covered with the Qwiic-enabled, SparkFun LSM6DSV16X 6DoF IMU Breakout. Erfahren Sie mehr -
SparkFun Analog/Digital MUX Breakout
16-Kanal Analog/Digital Multiplexer/Demultiplexer mit CD74HC4067 Erfahren Sie mehr -
SparkFun Atmospheric Sensor Breakout - BME280 (with Headers)
The SparkFun BME280 Atmospheric Sensor Breakout with Headers is the easy way to measure barometric pressure, humidity, and temperature readings all without taking up too much space. Erfahren Sie mehr -
SparkFun Breakout Board for Electret Microphone
Ready to add audio to your next project? This small breakout board couples a small electret microphone with a 100x opamp to amplify the sounds of voice, door knocks, etc Erfahren Sie mehr -
SparkFun Breakout Board für XBee-Module
Dieses Breakout Board führt alle 20 Pins der Digi XBee-Module auf Standard 0.1" (2.54mm) Pins raus. Erfahren Sie mehr -
SparkFun Brushless Motor Driver - 3-Phase (TMC6300)
The SparkFun 3-Phase Brushless Motor Driver, featuring the TMC6300 from ADI + Trinamic, is a powerful and easy-to-use three-phase motor driver. Erfahren Sie mehr -
SparkFun Electric Imp Breakout
The Electric Imp Breakout Board allows you to explore the capabilities of the Imp by providing standard 0.1" headers to solder to as well as the necessary CryptAuthEE IC to identify your prototype to the Imp Cloud service! Erfahren Sie mehr -
SparkFun Evaluation Board for Si4703 FM Tuner
Beyond being a simple FM radio, the Si4703 is also capable of detecting and processing both Radio Data Service (RDS) and Radio Broadcast Data Service (RBDS) information. Erfahren Sie mehr -
SparkFun FemtoBuck LED Driver
LED-Treiber für 0-350mA / 36V inkl. Dimmer Erfahren Sie mehr -
SparkFun Graphic LCD Serial Backpack
This is the serial backpack for graphic LCDs. The SparkFun Graphic LCD Serial Backpack interfaces to either our 160x128 pixel “Huge” Graphic LCD, or the smaller 128x64 pixel display Erfahren Sie mehr -
SparkFun I2S Audio Breakout - MAX98357A
Das SparkFun I2S Audio Breakout Board verwendet den Digital-Analog-Wandler (DAC) MAX98357A, der I2S-Audio in ein analoges Signal umwandelt. Erfahren Sie mehr -
SparkFun LED Array - 8x7
Das SparkFun LED Array ist ein Set aus 56 roten LEDs, angeordnet in einem 8x7-Raster. Erfahren Sie mehr -
SparkFun LED Tactile Button Breakout
Breakout für unsere LED Buttons Erfahren Sie mehr -
SparkFun Level Shifter - Bi-Dir 8 Channel (TXS0108E)
The SparkFun 8 Channel Level Shifter Breakout features the TXS0108E™ 8-bit, bi-directional logic level translator from Texas Instruments. Erfahren Sie mehr -
SparkFun LMV358 OpAmp Breakout
Breakout mit dem 2-Stufen OpAmp LMV358 Erfahren Sie mehr -
SparkFun Load Cell Amplifier - HX711
Breakout mit dem HX711 für Gewichtssensoren Erfahren Sie mehr -
SparkFun Load Sensor Combinator
The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard 4-wire wheatstone configuration. Erfahren Sie mehr -
SparkFun Logomatic v2 Serial SD Datalogger (FAT32)
The Logomatic v2 takes everything we learned with multiple logging projects over the years and boils it down to an easy to use device. Erfahren Sie mehr -
SparkFun MOSFET Power Controller
This MOSFET Power Controller makes it easy to switch a battery supply on and off using your favorite microcontroller. Erfahren Sie mehr -
SparkFun Multiplexer Breakout - 8 Channel (74HC4051)
8-Kanal Multiplexer / Demultiplexer mit dem 74HC4051 Erfahren Sie mehr -
SparkFun Nano Power Timer - TPL5110
Der SparkFun Nano Power Timer läuft bei minimalem Stromverbrauch (ca. 35nA) und schaltet Ihr Projekt nach einer bestimmten Zeit ein und wieder aus. Erfahren Sie mehr
Breakout Boards
Minimal Price: CHF 19.90
