Sie haben keine Artikel im Warenkorb.
Neue Produkte
Unsere neuesten Produkte immer im Ueberblick
-
Adafruit Adafruit Audio FX Sound Board + 2x2W Amp - WAV/OGG Trigger -16MB
The Sound Board has a lot of amazing features that make it the easiest thing ever Erfahren Sie mehr -
Play-zone Experimentierplatinen 5cm x 7cm - 3er Set
Experimentierplatinen 5cm x 7cm - 3er Set in Rot，Blau und Schwarz。
Erfahren Sie mehr -
Adafruit VL53L4CX Time of Flight Distance Sensor - ~1 to 6000mm - STEMMA QT / Qwiic
The Adafruit VL53L4CX Time of Flight Sensor is another great Time of Flight distance sensor from ST in the VL5 series of chips, this one is great for long distances - it goes up to 6 meters compared with 4 meter max of the VL53L1X. Erfahren Sie mehr -
Adafruit Ultimate GPS Breakout with GLONASS + GPS - PA1616D - 99 channel w/10 Hz updates
This version of the Ultimate GPS is even MORE Ultimate, with support for more GPS-like networks such as GLONASS, for even more coverage worldwide. It uses a slightly taller module than our classic Ultimate GPS, and uses a little more power. Otherwise its almost identical in functionality Erfahren Sie mehr -
Adafruit ESP32-S3 Feather with STEMMA QT / Qwiic - 8MB Flash No PSRAM
The ESP32-S3 has arrived in Feather format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this Feather is great for powering your IoT projects. Erfahren Sie mehr -
Adafruit 15x7 CharliePlex LED Matrix Display FeatherWing Warm White
FeatherWing mit 7 x 15 LEDs für alle Adafruit Feather Boards Erfahren Sie mehr -
Arduino Nano RP2040 Connect (mit Headers)
The brain of the board is the Raspberry Pi® RP2040 silicon; a dual-core ARM® Cortex M0+ running at 133MHz. It has 264KB of SRAM, and the 16MB of flash memory is off-chip to give you extra storage. But what’s really exciting is the on-board connectivity options. Erfahren Sie mehr -
SparkFun Distance Sensor - 1.3 Meter, VL53L4CD (Qwiic)
This SparkFun Distance Sensor Breakout utilizes the VL53L4CD next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at short ranges for its size. Erfahren Sie mehr -
SparkFun Analog MEMS Microphone Breakout - SPH8878LR5H-1
The SparkFun Analog MEMS Microphone Breakout makes it easy to work with the SPH8878LR5H-1 analog microphone from Knowles. Erfahren Sie mehr -
5MP Camera für den Raspberry Pi Zero mit 30cm Kabel
Kleiner Pi - kleine Kamera: obwohl die Kamera nur gerade 8.5mm misst, bietet soe eine Auflösung von 5 Megapixel sowie einen Betrachtungswinkel von 72.4Grad. mit 30cm Kabel Erfahren Sie mehr -
Adafruit ESP32-S2 Feather with BME280 Sensor - STEMMA QT - 4MB Flash + 2 MB PSRAM
The new Adafruit ESP32-S2 Feather with BME280 temperature/humidity/pressure sensor built right in! Erfahren Sie mehr -
ADXL343 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI - STEMMA QT / Qwiic
The sensor has three axes of measurements, X Y Z, and pins that can be used either as I2C or SPI digital interfacing. You can set the sensitivity level to either +-2g, +-4g, +-8g or +-16g. Erfahren Sie mehr -
Kitronik Monk Makes Electronics Kit 1 for Pico (lite edition)
The Monk Makes Electronics Kit 1 for Pico (lite edition) is a low cost, simple to use electronic Kit for the Raspberry Pi Pico. The kit has been designed to teach you basic electronics and coding via the Pico platform. Erfahren Sie mehr -
Kitronik ZIP Halo for the BBC micro:bit
Add some colour to your next coding project with our new Halo board for the BBC micro:bit. The Halo has 24 ZIP LEDs, which are individually addressable full colour LEDs. Erfahren Sie mehr -
Kitronik Electro-Fashion Starter Pack, Miniature Cell Holder
This pack is a great way to get started with E-Textiles. We have selected a number of products from our Electro-Fashion range, including three of our ultra-slim LEDs and two seperate power boards Erfahren Sie mehr -
Kitronik Discovery Kit for the BBC micro:bit
The Kit contains five experiments that start very simply, building up to simulating real world systems as confidence grows. Erfahren Sie mehr -
Electro-Fashion Deluxe E-Textiles Pack
This deluxe E-Textiles pack is a great way to get a little more involved with E-Textiles. We have selected a number of products from our Electro-Fashion range, including three of our ultra-slim LEDs and two separate power boards Erfahren Sie mehr -
NeoPixel / WS2812D Diffused 8mm Through-Hole LED - 10 Pack
NeoPixel als normale RGB-LED getarnt! Verbinden Sie beliebig viele dieser 8mm LEDs und steuern diese Sie mit nur einem IO-Pin! Erfahren Sie mehr -
Raspberry Pi 5MP Camera-Module / 6mm Brennweite / 1/2.7" / 45Grad
5MP Kamera mit 6mm Brennweite für Ihren Raspberry. Erfahren Sie mehr -
Adapter-Kabel USB auf DC-Stecker (3.5x1.35mm) 100cm 20AWG 100/0.08mm
Adapter-Kabel USB auf DC-Stecker (3.5x1.35mm), Länge 100cm 20AWG 100/0.08mm
Erfahren Sie mehr -
Kitronik :MOVE Motor Klaw Kit
The :MOVE Motor Klaw provides a fun and easy to install addition to the Kitronik :MOVE Motor buggy for microbit. Erfahren Sie mehr -
Kitronik LAMP:bit - Street Light for BBC micro:bit
The LAMP:bit features connections which allow the microbit to be bolted/clipped directly to it. It has been designed to replicate a streetlight, in form and function. Erfahren Sie mehr -
Kitronik Klaw MK2 Robotic Gripper Kit
The Kitronik Klaw MK2 Robotic Gripper Kit / robot claw is the latest version of the original and popular Kitronik Klaw and is a great addition to any robotics or buggy project. Erfahren Sie mehr -
Kitronik Electro-Fashion, Discovery Pack with printed manual
This pack is a great way of getting started with E-Textiles. The pack contains a selection of the popular products from our 'Electro Fashion' range. Erfahren Sie mehr -
Kitronik Linear Actuator Kit
Our new Linear Actuator converts the circular movement of a 180 degree servo (supplied) into motion in a straight line, one way and then the other. Erfahren Sie mehr -
Cytron Maker Uno: Simplifying Arduino for Education
Maker UNO is an Arduino Compatible board specially designed to simplify building your projects: Coding & Electronics is made easy with the Maker UNO because it has built-in indicator LEDs (x12), buzzer and input button. Erfahren Sie mehr -
Cytron Maker UNO X: Simplifying Arduino for Classrooms
Maker UNO X is a Classroom-friendly Arduino-compatible development board. It is the culmination of years of teaching Arduino & STEM by a variety of developers and educators. Erfahren Sie mehr -
Cytron Maker Nano - Simplifying Arduino for Projects
Love Maker UNO? But it's too big to fit into your project? Worry not! Introducing Maker Nano, an Arduino board specially crafted for building projects while maintaining all the useful features of Maker UNO. Erfahren Sie mehr -
10 Stk. Platinenschalter Schwarz 12 x 12 x 7.3 mm
10 Stk. Platinenschalter / Push Button 12 x 12 mm
Erfahren Sie mehr -
Adafruit MSA311 Triple Axis Accelerometer - STEMMA QT / Qwiic
The MSA311 is a super small and low-cost triple-axis accelerometer. It's inexpensive, but has just about every 'extra' you'd want in an accelerometer. Erfahren Sie mehr