Sie haben keine Artikel im Warenkorb.
Suchergebnisse für 'pcb'
-
Adafruit TPS62827 3.3V Buck Converter Breakout - 3.3V Output 2 Amp Max
This little buck converter based on the TPS62827 is super handy, taking up to 5.5V input and providing a 3.3V output with up to 2A current. Erfahren Sie mehr -
Adafruit BMP388 - Precision Barometric Pressure and Altimeter - STEMMA QT
The BMP3xx is the next-generation of sensors from Bosch and is the upgrade to the BMP280 - with a low altitude noise as low as 0.1m and the same fast conversion time. Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-28 or TSSOP-28 - 3 Pack!
One side has a 28-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 28-SOIC. Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-16 or TSSOP-16 - 3 Pack!
One side has a 16-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 16-SOIC. Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-8, MSOP-8 or TSSOP-8 - 6 Pack!
One side has a 8-TSSOP/8-MSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 8-SOIC Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-20 or TSSOP-20 - 3 Pack!
One side has a 20-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 20-SOIC. Erfahren Sie mehr -
Adafruit LTR390 UV Light Sensor - STEMMA QT / Qwiic
The LTR390 is one of the few low-cost UV sensors available, and it's a pretty nice one! With both ambient light and UVA sensing with a peak spectral response between 300 and 350nm. You can use it for measuring how much sun you can get before needing to covering up. Erfahren Sie mehr -
Adafruit LTC4311 I2C Extender / Active Terminator - STEMMA QT / Qwiic
You can now achieve much faster data rates without having to noodle with resistors, and over long cables. Erfahren Sie mehr -
Adafruit BH1750 Light Sensor - STEMMA QT / Qwiic
The BH1750 provides 16-bit light measurements in lux, the SI unit for measuring light, making it easy to compare against other values like references and measurements from other sensors. Erfahren Sie mehr -
Adafruit H3LIS331 Ultra High Range Triple-Axis Accelerometer - STEMMA QT / Qwiic
It’s not hard to find an accelerometer that can measure accelerations up to 16g, but if you need an accelerometer that can measure even larger amounts of acceleration, your options narrow (The ICM20649 is a great sensor and can measure up to ±30g). Erfahren Sie mehr -
Adafruit CCS811 Air Quality Sensor Breakout - VOC and eCO2
Breathe easy - we finally have an I2C VOC/eCO2 sensor in the Adafruit shop! Add air quality monitoring to your project and with an Adafruit CCS811 Air Quality Sensor Breakout. Erfahren Sie mehr -
Adafruit Quad Side-By-Side FeatherWing
Ein 4xPrototyping-Add-on für alle Feather-Boards. Erfahren Sie mehr -
Adafruit AS7262 6-Channel Visible Light / Color Sensor Breakout
This sensor from AMS has 6 integrated visible light sensing channels for red, orange, yellow, green, blue, and violet. Erfahren Sie mehr -
Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2
A fully integrated MOX gas sensor. This is a very fine air quality sensor from the sensor experts at Sensirion, with I2C interfacing and fully calibrated output signals with a typical accuracy of 15% within measured values. Erfahren Sie mehr -
Adafruit APDS9960 Proximity, Light, RGB, and Gesture Sensor - STEMMA QT / Qwiic
This breakout is chock full o' sensors! Add basic gesture sensing, RGB color sensing, proximity sensing, or ambient light sensing to your project with the Adafruit APDS9960 Proximity, Light, RGB and Gesture Sensor. Erfahren Sie mehr -
Adafruit HUZZAH32 – ESP32 Feather Board
Feather-Board mit dem WROOM32 / ESP32 (240Mhz, WiFi und vielen IO-Pins) Erfahren Sie mehr -
Adafruit Sensiron SHT31-D Temperature & Humidity Sensor Breakout
The SHT31-D sensor has an excellent ±2% relative humidity and ±0.3°C accuracy for most uses. Erfahren Sie mehr -
Adafruit TFT FeatherWing - 2.4" 320x240 Touch
Spice up your Feather project with a beautiful 2.4" touchscreen display shield with built in microSD card socket. Erfahren Sie mehr -
Adafruit I2S 3W Stereo Speaker Bonnet for Raspberry Pi - Mini Kit
Turn up that Raspberry Pi mix to the max with this cute 3W Stereo Amplifier Bonnet for Raspberry Pi. Erfahren Sie mehr -
Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM
Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi A+, B+, or Pi 2 with this jaunty prototyping HAT kit. Erfahren Sie mehr -
Adafruit Perma Proto Bonnet Mini Kit
Praktisches Prototyping-Boonet in der grösse der Pi Zero, jedoch auch für alle anderen 40-Pin Pi geeignet. Erfahren Sie mehr -
Adafruit Music Maker FeatherWing w/ Stereo 3W Amplifier
This powerful wing features the VS1053, an encoding/decoding (codec) chip that can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). You can do all sorts of stuff with the audio as well such as adjusting bass, treble, and volume digitally. Erfahren Sie mehr -
Terminal Block Breakout FeatherWing für alle Feather, assembliert
Alle Feather-Pins sind auf Schraubklemmen herausgeführt - ideal für temporäre wie auch fixe Installationen. Erfahren Sie mehr -
Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board
Breakout mit dem DRV8833, treibt zwei DC-Motoren oder einen Stepper mit 1.2A peak / Kanal an. Erfahren Sie mehr -
Adafruit DS1307 RTC Echtzeituhr Breakout Board - Assembliert
Batteriegepufferte Echtzeituhr (Real Time Clock, RTC) - Assembliert Erfahren Sie mehr -
Adafruit Power Relay FeatherWing
Non-Latching Relay für alle Feather-Boards, Schaltet bis 240VAC bei 5A Erfahren Sie mehr -
Silicone Elastomer 4x4 Button Keypad - for 3mm LEDs
So squishy! These silicone elastomer keypads are just waiting for your fingers to press them. Erfahren Sie mehr -
Adafruit Trellis Monochrome Driver PCB
Adafruit Trellis Monochrome Driver PCB for 4x4 Keypad & 3mm LEDs Erfahren Sie mehr -
Adafruit Non-Latching Mini Relay FeatherWing
FeatherWin mit einem Mini Non-Latching Relay (nicht selbsthaftend) Erfahren Sie mehr -
Adafruit Latching Mini Relay FeatherWing
FeatherWin mit einem Mini Latching Relay (HaftRelay) Erfahren Sie mehr