Sie haben keine Artikel im Warenkorb.
Suchergebnisse für 'fun'
-
Adafruit 8-channel Bi-directional Level Converter - TXB0108
8-Kanal Bidirektionaler Level-Converter (von 1.2V-3.6V auf 1.7V-5.5V) Erfahren Sie mehr -
Adafruit 2-Achsen Daumen-Joystick mit Select Button + Breakout Board
Kit bestehend aus einem 2-Achsen Thumb-Joystick und Breakout Board Erfahren Sie mehr -
Adafruit Ultimate GPS Breakout - 66 Kanäle / 10 Hz updates V3
Wenn Adafruit einem GPS-Modul den Namen "ULTIMATE" gibt, dann ist es das ultimative Modul schlechthin: Empfindlichkeit -165 dBm, 5V Tolerant, für Breadboards geeignet, Montage-Löcher, 10 Hz Updates, 66 Kanäle, kann per Batterie betrieben werden und besitzt eine Status LED! Und das alles für unter CHF 50.00! Erfahren Sie mehr -
Adafruit 4-Kanal Bi-directional Level Converter / I2C OK
4-Kanal Bidirektionaler Level-Converter (von 1.8V bis 10V). I2C-Safe! Erfahren Sie mehr -
Adafruit RGB LCD I2C Shield Kit 16x2 Char Display - Negativ
LCD-Shields sind populäre Erweiterungen für den Arduino - das neue Adafruit I2C LCD Shield steuert jetzt das ganze mit nur 2 IO-Pins! Erfahren Sie mehr -
Adafruit RGB LCD I2C Shield Kit 16x2 Char Display - Positiv
LCD-Shields sind populäre Erweiterungen für den Arduino - das neue Adafruit I2C LCD Shield steuert jetzt das ganze mit nur 2 IO-Pins! Erfahren Sie mehr -
Adafruit Monochromes 1.3" 128x64 OLED Grafik-Display -STEMMA QT / Qwiic
Sehr kontrastreiches 1.3" OLED-Display mit einer Auflösung von 128x64 Pixel. Erfahren Sie mehr -
Adafruit Kontaktloses Temperatur Sensor Breakout TMP006
Dieses Breakout verfügt über einen wirklich coolen IR-Sensor von TI und misst die Temperatur eines Objekts ohne es zu berühren
Erfahren Sie mehr -
MiFare Classic (13.56 MHz) RFID-Tag Sortiment
Sortiment aus 5 verschiedenen MiFare Classic 1k RFID-Tags Erfahren Sie mehr -
MiFare Classic (13.56 MHz) RFID-Tag Kreditkarte
MiFare Classic (13.56 MHz) RFID-Tag im Kreditkartenformat Erfahren Sie mehr -
Adafruit 16x8 LED Matrix Driver Backpack (HT16K33 Breakout)
The HT16K33 is a neat little chip that has the ability to drive a multiplexed 16x8 matrix (that's 128 individual LEDs). Erfahren Sie mehr -
Adafruit Trinket - 3.3V
It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. Erfahren Sie mehr -
Adafruit Trinket - 5.0V
It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. Erfahren Sie mehr -
Adafruit VS1053 Codec + MicroSD Breakout (MP3/WAV/MIDI/OGG)
The VS1053 can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM) - Play & Record Erfahren Sie mehr -
Adafruit 0.56" 4-Digit 7-Segment w/I2C - Rot
Control this cascadable 4-Digit 7-Segment Display with I2C Backpack - only 2 I/O-Pins needed! Erfahren Sie mehr -
Adafruit 0.56" 4-Digit 7-Segment w/I2C - Gelb
Control this cascadable 4-Digit 7-Segment Display with I2C Backpack - only 2 I/O-Pins needed! Erfahren Sie mehr -
Adafruit 0.56" 4-Digit 7-Segment w/I2C - Blau
Control this cascadable 4-Digit 7-Segment Display with I2C Backpack - only 2 I/O-Pins needed! Erfahren Sie mehr -
WS2812 NeoPixel Digital RGB LED Weatherproof Strip 60 LED - 4 Meter Rolle
Die neuen Neopixel - jetzt noch leuchtender! Rolle zu 4 Meter mit 60 einzeln ansteuerbaren RGB-LED/Meter. Erfahren Sie mehrRegulärer Preis: CHF 139.90
Special Price CHF 129.90
Zur Zeit Ausverkauft
-
Adafruit Resistive Touch Screen to USB Mouse Controller - AR1100
The AR1100 is a nice chip that is acting as a touch->USB converter and also comes with calibration software. Erfahren Sie mehr -
Adafruit Music Maker MP3 Shield for Arduino (MP3/Ogg/WAV...)
Music-Shield mit dem VS1053, ein Codec-Chip welcher viele Formate wie MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM und ADPCM) dekodieren kann. Das Shield kann auch Audio in PCM (WAV) und Off Vorbis aufzeichnen! Erfahren Sie mehr -
Adafruit GEMMA V2 - Miniature wearable electronic platform
Der FLORA ist Ihnen zu gross? Mit dem GEMMA präsentiert Adafruit eine fast 100% Arduino-Kompatible Wearable Platform mit nur 2.5cm Durchmesser! Erfahren Sie mehr -
Adafruit Kontaktloser Temperatur Sensor Breakout TMP007
Kontaktloser Infrarot Thermopile Sensor mit TMP007 - Breakout Erfahren Sie mehr -
Adafruit Pi T-Cobbler Plus Kit - for Pi B+ - Assembled
Der neue T-Cobbler von Adafruit, welcher alle 40 Pins des Raspberry Pi Model B+ herausführt - Komplett gelötet und sofort einsatzbereit. Erfahren Sie mehr -
MiFare Classic (13.56 MHz) RFID-Tag Armband
MiFare Classic (13.56 MHz) RFID-Tag als Armband Erfahren Sie mehr -
Adafruit 16-Channel PWM / Servo HAT für Raspberry Pi
Das Adafruit 16-Kanal 12-bit PWM/Servo HAT steuert bis zu 16 Servos oder PWM-Ausgänge über I2C mit nur gerade 2 Pins. Erfahren Sie mehr -
Adafruit Ultimate GPS HAT für Raspberry Pi A+ or B+
Dieses HAT ist mit dem bekannten Ultimate GPS von Adafruit ausgerüstet und informiert Sie über die genaue Zeit sowie Position Ihres Pi Model A+ oder B+. Erfahren Sie mehr -
Adafruit Perma-Proto HAT für Pi Kit - mit EEPROM
Designen Sie ihr eigenes Pi HAT mit diesem Prototyping PCB mit EEPROM für den Raspberry Pi A+ und B+ Erfahren Sie mehr -
Adafruit Music Maker MP3 Shield for Arduino w/3W Stereo Amp
Vielseitiges Audio-Shield mit MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC und WAV (PCM and ADPCM)-Support und onboard 3W-Stereo Verstärker Erfahren Sie mehr -
Adafruit i2c / SPI character LCD backpack
I2C / SPI Backpack für LCDs von 8x1 bis 20x4 Zeichen - zur Ansteuerung werden so nur noch zwei Pins gebraucht. Erfahren Sie mehr -
Adafruit Bluefruit LE UART Friend - Bluetooth Low Energy (BLE)
Mit dem Bluetooth LE UART Friend ist es ein leichtes, Bluetooth an jeden (Hardware- oder Software) Serial-Port zu verbinden. Erfahren Sie mehr
