Sie haben keine Artikel im Warenkorb.
Suchergebnisse für 'led'
-
SparkFun Flexible Qwiic Cable - 100mm
This is a 100mm long 4-conductor cable with 1mm JST termination. Erfahren Sie mehr -
SparkFun Flexible Qwiic Cable - 200mm
This is a 200mm long 4-conductor cable with 1mm JST termination. Erfahren Sie mehr -
SparkFun Flexible Qwiic Cable - 500mm
This is a 500mm long 4-conductor cable with 1mm JST termination. Erfahren Sie mehr -
SparkFun Qwiic Cable Kit
The SparkFun Qwiic Cable Kit includes 10 cables of various lengths and styles that will get your Qwiic boards connected together, to a development platform, or to a breadboard. Erfahren Sie mehr -
SparkFun Qwiic Shield for Arduino
The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino Uno. Erfahren Sie mehr -
SparkFun Qwiic LED Stick - APA102C
The SparkFun Qwiic LED Stick features ten addressable APA102 LEDs, making it easy to add full color LED control using I2C. Erfahren Sie mehr -
SparkFun IoT Starter Kit with Blynk Board
The SparkFun IoT Starter Kit with Blynk Board is a great way to gain a solid introduction to the world of Internet of Things (IoT) technology without any difficult programming. Erfahren Sie mehr -
SparkFun 9DoF IMU Breakout - ICM-20948 (Qwiic)
The SparkFun 9DoF IMU Breakout incorporates all the amazing features of Invensense's ICM-20948 into a Qwiic-enabled breakout board complete with a logic shifter and broken out GPIO pins for all your motion sensing needs. Erfahren Sie mehr -
SparkFun ProDriver - Stepper Motor Driver (TC78H670FTG)
The SparkFun ProDriver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba! Erfahren Sie mehr -
SparkFun Qwiic Button - Green LED
The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an easy to use I2C device! Erfahren Sie mehr -
SparkFun LiPo Charger Plus
Mit dieser Iteration haben wir den Eingangsladestecker auf USB-C umgestellt und bieten eine Auswahl der Laderate sowie einen optionalen Wärmeschutz. Erfahren Sie mehr -
SparkFun RedBot Sensor - Line Follower (Analog)
Der Line Follower Sensor ist ein Add-on, welches Ihrem Roboter die Möglichkeit gibt, Linien oder umliegende Objekte zu erkennen. Erfahren Sie mehr -
SparkFun WiFi IR Blaster (ESP8266)
Möchtest du deinen Fernseher über einen Webbrowser steuern? Möchtest du Trigger für deinen IR-gesteuerten LED-Strip planen? Dies sind alles Anwendungen, für die der WiFi IR Blaster perfekt geeignet ist. Erfahren Sie mehr -
SparkFun LoRa Gateway - 1-Channel (ESP32)
Das SparkFun 1-Kanal LoRa Gateway ist ein starkes 3-Netzwerk-fähiges Gerät - dank eines integrierten ESP32 WROOM Moduls und eines RFM95W LoRa Modems. Erfahren Sie mehr -
SparkFun Teensy Arduino Shield Adapter
Der Teensy Arduino Shield Adapter ermöglicht es Ihnen, Ihren Teensy zu befestigen und Ihre bevorzugten Arduino Shields zu verwenden, ohne dass Sie ein Lochraster oder eine komplizierte Verkabelung benötigen Erfahren Sie mehr -
SparkFun Tinker Kit
Das SparkFun Tinker Kit (STK) ist ein hervorragender Einstieg in die Programmierung und Hardware-Interaktion mit der Programmiersprache Arduino Erfahren Sie mehr -
SparkFun RedBoard Edge
Das SparkFun RedBoard Edge ist eine raffinierte Überarbeitung des SparkFun RedBoard, die für den Einbau in Ihr individuelles Projektgehäuse entwickelt wurde. Erfahren Sie mehr -
RGB LED Panel - 32x32
32x32 RGB LED Panel, 19x19cm Erfahren Sie mehr -
SparkFun ESP32 Thing Motion Shield
The SparkFun ESP32 Thing Motion Shield is a versatile, motion-sensing addition to our ESP32 Thing. Erfahren Sie mehr -
SparkFun Motor Driver - Dual TB6612FNG (1A)
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Erfahren Sie mehr -
SparkFun LiPo Charger/Booster - 5V/1A
The SparkFun 5V/1A LiPo Charger/Booster is a no-nonsense circuit for generating one amp from a Lithium Polymer battery at 5V. Erfahren Sie mehr -
SparkFun Lumenati 8-stick
Stick mit 8 APA102-LEDs (RGB) - kaskadierbar - benötigt nur zwei IOs zur Ansteuerung Erfahren Sie mehr -
SparkFun Graphic LCD Serial Backpack
This is the serial backpack for graphic LCDs. The SparkFun Graphic LCD Serial Backpack interfaces to either our 160x128 pixel “Huge” Graphic LCD, or the smaller 128x64 pixel display Erfahren Sie mehr -
ZX Distance and Gesture Sensor
The ZX Distance and Gesture Sensor is a touchless sensor that is capable of looking for simple gestures. Erfahren Sie mehr -
SparkFun Serial Controlled Motor Driver
The SparkFun Serial Controlled Motor Driver (SCMD) is a DC motor driver that’s been designed to drive small DC motors with ease. Erfahren Sie mehr -
SparkFun Ardumoto Shield Kit
The SparkFun Ardumoto Shield Kit is perfect for any robot enthusiast and includes an Ardumoto Shield, as well as pairs of tires, motors, connectors and wires. Erfahren Sie mehr -
SparkFun TeensyView
The SparkFun TeensyView brings you an easy way to add a small, white-on-black OLED to your Teensy development board. Erfahren Sie mehr -
SparkFun Opto-isolator Breakout
This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. Erfahren Sie mehr -
SparkFun Wireless Joystick Kit
The SparkFun Wireless Joystick Kit provides an easy way to control your next XBee project. Erfahren Sie mehr -
SparkFun PiRetrocade
Das Arcade-Pult zum Selberbauen - die Verpackung wird dabei gleich mitverwendet ;) inkl. SDCard mit Porta Pi. Erfahren Sie mehr
