Sie haben keine Artikel im Warenkorb.
Suchergebnisse für 'switch'
-
SparkFun Essential Sensor Kit V2
Set mit vielen verschiedenen Sensoren - Temperatur, Magnet, Infrarot uvm. Erfahren Sie mehr -
Adafruit MOSFET Driver - For Motors, Solenoids, LEDs, etc - STEMMA JST PH 2mm
This board has a simple plug-and-play JST PH (2mm pitch) input connector for solderless use. Provide power (from 3V up to 30V) and signal (3V to 20V logic level). Erfahren Sie mehr -
SparkFun Buck Regulator Breakout - 3.3V (AP3429A)
The SparkFun 3.3V Buck Regulator Breakout features the AP3429A from Diodes Inc., a 2A step-down DC-DC converter with an input voltage range of 2.7V to 5.5V. Erfahren Sie mehr -
SparkFun Buck Regulator Breakout - 1.8V (AP3429A)
The SparkFun 1.8V Buck Regulator Breakout features the AP3429A from Diodes Inc., a 2A step-down DC-DC converter with an input voltage range of 2.7V to 5.5V. Erfahren Sie mehr -
Adafruit QT Py S3 with 2MB PSRAM WiFi Dev Board with STEMMA QT
The ESP32-S3 has arrived in QT Py format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this QT Py is great for powering your IoT projects. Erfahren Sie mehr -
Adafruit LM66200 Ideal Dual Diodes Breakout
The Adafruit LM66200 Dual Ideal Diode breakout is a cute solution to dual supplies: it has back-voltage protection, and two 'ideal' diodes with RdsOn of 40 milliohms, support for 2.5A continuous draw and a separate enable input and status output. Erfahren Sie mehr -
SparkFun Tristimulus Color Sensor - OPT4048DTSR (Qwiic)
The SparkFun Qwiic Tristimulus Color Sensor is built around the OPT4048 High-Speed, High-Precision Tristimulus XYZ Color Sensor from Texas Instruments. Erfahren Sie mehr -
10 Stk. Mini Schiebe Schalter / Slide Switch - ON/ON - Griffhöhe 2mm
Kleiner Schalter, nur 8.5mm x 3.7mm, 2.54mm Raster, Set 10 Stk. Erfahren Sie mehr -
Adafruit TS3USB30 1 to 2 USB Switch
Das Adafruit TS3USB30 1 to 2 USB Switch ist ein schickes Breakout-Board für den TI TS3USB30, mit dem man eines von zwei USB-Geräten an einen einzigen Port anschließen kann. Das ist praktisch, wenn man mehrere Chips hat, die über USB kommunizieren sollen, aber man keinen Hub will. Erfahren Sie mehr -
Adafruit QT Py CH32V203 Dev Board with STEMMA QT
The CH32V203G6 has a single 32-bit RISC-V core, running up to 144MHz, with 1-cycle multiply/divide. Inside is 10KB SRAM, 32KB single-cycle Flash as well as an additional 'external XIP' 224KB of Flash that can be used for program or data storage Erfahren Sie mehr -
Breadboard-friendly SPDT Slide Switch
Diese praktischen Schalter eignen sich perfekt für Projekte mit Steckboards und Lochrasterplatinen. Erfahren Sie mehr -
MPI 4.3" HDMI LCD für Raspberry Pi/Windows (HDMI), Kapazitiven Touch, 800x480
4.3" TFT-Screen 800x480 mit HDMI-Interface und Kapazitiven Touch Erfahren Sie mehr
