Sie haben keine Artikel im Warenkorb.
Suchergebnisse für 'breadboard'
-
Adafruit ItsyBitsy RP2040
Featuring the Raspberry Pi RP2040! Small, powerful, with a ultra fast dual Cortex M0+ processor running at 125 MHz Erfahren Sie mehr -
Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout - STEMMA QT / Qwiic
The MCP9808 digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard I2C. Erfahren Sie mehr -
Adafruit HTU31 Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic
The HTU31-D is the third generation of temperature-humidity sensors from TE and great for sensing temperature and humidity, with excellent specifications. Erfahren Sie mehr -
Adafruit TMP117 ±0.1°C High Accuracy I2C Temperature Sensor
The TMP117 Precision Temperature Sensor is an I2C temperature sensor that will help you easily add temperature measurement and adjustment to your project. Erfahren Sie mehr -
Adafruit LPS35HW Water Resistant Pressure Sensor - STEMMA QT
The ST LPS35HW is a water resistant barometric pressure and temperature sensor that is also safe to use in wet environments. The sensing element is nestled safely in a ceramic package and is encased in a waterproof gel that prevents water that gets into the sensor from interfering with readings. Erfahren Sie mehr -
Adafruit AirLift – ESP32 WiFi Co-Processor Breakout Board
Give your plain ol' microcontroller project a lift with the Adafruit AirLift - a breakout board that lets you use the powerful ESP32 as a WiFi co-processor. Erfahren Sie mehr -
Adafruit TPS62827 3.3V Buck Converter Breakout - 3.3V Output 2 Amp Max
This little buck converter based on the TPS62827 is super handy, taking up to 5.5V input and providing a 3.3V output with up to 2A current. Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-28 or TSSOP-28 - 3 Pack!
One side has a 28-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 28-SOIC. Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-16 or TSSOP-16 - 3 Pack!
One side has a 16-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 16-SOIC. Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-8, MSOP-8 or TSSOP-8 - 6 Pack!
One side has a 8-TSSOP/8-MSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 8-SOIC Erfahren Sie mehr -
Adafruit SMT Breakout PCB for SOIC-20 or TSSOP-20 - 3 Pack!
One side has a 20-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 20-SOIC. Erfahren Sie mehr -
Adafruit LTR390 UV Light Sensor - STEMMA QT / Qwiic
The LTR390 is one of the few low-cost UV sensors available, and it's a pretty nice one! With both ambient light and UVA sensing with a peak spectral response between 300 and 350nm. You can use it for measuring how much sun you can get before needing to covering up. Erfahren Sie mehr -
MPM3610 5V Buck Converter Breakout - 21V In 5V Out at 1.2A
This little buck converter based on the MPM3610 is a marvel, taking up to 21V input and providing a 5V output with up to 1.2A current. Erfahren Sie mehr -
Adafruit AP3429A/TLV62569 3.3V Buck Converter Breakout - 3.3V Output 1.2A Max
This little buck converter based on the AP3429A is super handy, taking up to 5.5V input and providing a 3.3V output with up to 1.2A current. Erfahren Sie mehr -
Adafruit Micro SD SPI or SDIO Card Breakout Board - 3V ONLY!
MicroSD Breakout mit SPI und SPI, nur für 3V Erfahren Sie mehr -
Adafruit 2.7" Tri-Color ePaper Display with SRAM
Dieses Breakout hat ein 2,7" dreifarbiges (rot, schwarz und weiss) Display. Es verfügt über 264x176 schwarze und rote Tintenpixel und einen weisslichen Hintergrund. Erfahren Sie mehr -
Adafruit ItsyBitsy M4 Express featuring ATSAMD51
Klein, leistungsstark, mit einem ultraschnellen ATSAMD51 Cortex M4 Prozessor mit 120 MHz. Erfahren Sie mehr -
Adafruit Feather M4 Express - ATSAMD51 Cortex M4
Dieser Feather wird von unserem neuen Lieblingschip, dem ATSAMD51J19, mit seinem 120MHz Cortex M4 mit Gleitkommaunterstützung und 512KB Flash und 192KB RAM angetrieben. Erfahren Sie mehr -
Particle Maker Kit with Photon
The Particle Maker Kit has just about everything you need to get started with your Particle Photon. Erfahren Sie mehrCHF 109.90 -
Adafruit Feather 328P - Atmega328P 3.3V @ 8 MHz
With this Feather we're getting a little nostalgic for the ATmega328P - the classic 'Arduino' chip - with this Adafruit Feather 328P running a 3.3V and 8 MHz. Erfahren Sie mehr -
Adafruit PDM MEMS Microphone Breakout
An exotic new microphone has arrived in the PLAY-ZONE-shop, a PDM MEMS Microphone! PDM is the 'third' kind of microphone you can integrate with electronics, apart from analog or I2S. Erfahren Sie mehr -
Adafruit PT1000 RTD Temperature Sensor Amplifier - MAX31865
RTP Verstärker mit dem MAX31865, geeignet für alle PT1000-Sensoren Erfahren Sie mehr -
Adafruit TPL5111 Low Power Timer Breakout
The Adafruit TPL5111 Reset Enable Timer is a stand-alone breakout that will turn any electronics into low-power electronics! It will take care of enabling & disabling your electronics using a built in timer that can vary from once-every 100ms up to once every two hours. Erfahren Sie mehr -
Adafruit HUZZAH32 – ESP32 Feather Board
Feather-Board mit dem WROOM32 / ESP32 (240Mhz, WiFi und vielen IO-Pins) Erfahren Sie mehr -
Adafruit Feather M0 Express - for CircuitPython - ATSAMD21 Cortex M0
We love all our Feathers equally, but this Feather is very special. It's our first Feather that is specifically designed for use with CircuitPython! Erfahren Sie mehr -
Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM
Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi A+, B+, or Pi 2 with this jaunty prototyping HAT kit. Erfahren Sie mehr -
Adafruit Perma Proto Bonnet Mini Kit
Praktisches Prototyping-Boonet in der grösse der Pi Zero, jedoch auch für alle anderen 40-Pin Pi geeignet. Erfahren Sie mehr -
Adafruit ADXL326 - 5V ready triple-axis accelerometer (+-16g analog out)
This breakout comes with 3 analog outputs for X, Y and Z axis measurements on a 0.75"x0.75" breakout board. Erfahren Sie mehr -
Adafruit 9-DOF Accel/Mag/Gyro+Temp Breakout Board - LSM9DS1
9-Dof mit Accelerometer, Magentometer und Gyro, I2C und SPI Erfahren Sie mehr -
Adafruit Feather M0 Bluefruit LE
Der All-In-One Feather mit dem ATSAMD21G18, Bluetooth LE, USB und LiPo-Charging! Erfahren Sie mehr