Suchergebnisse für 'arduino'
-
Arduino Oplà IoT Kit
The Oplà IoT Kit allows you to add connectivity to devices around the home or workplace. It comes complete with a set of 8 Internet of Things self assemble projects ready to show you how to turn everyday appliances into ‘smart appliances’ and build custom connected devices that can be controlled with your mobile phone. Erfahren Sie mehrRegulärer Preis: CHF 169.90
Special Price CHF 124.90
-
Adafruit LSM6DSO32 6-DoF Accelerometer and Gyroscope - STEMMA QT / Qwiic
This lil IMU is like a big sister to the LSM6DSOX, it has the same pin out and firmware - but the accelerometer component can go up to 32g instead of the normal 16g maximum. Erfahren Sie mehr -
SparkFun ProDriver - Stepper Motor Driver (TC78H670FTG)
The SparkFun ProDriver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba! Erfahren Sie mehr -
NeoPixel / WS2812 Diffused 5mm Through-Hole LED - 10 Pack
NeoPixel als normale RGB-LED getarnt! Verbinden Sie beliebig viele dieser 5mm LEDs und steuern diese Sie mit nur einem IO-Pin! Erfahren Sie mehr -
SparkFun Qwiic Button - Green LED
The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an easy to use I2C device! Erfahren Sie mehr -
Adafruit BH1750 Light Sensor - STEMMA QT / Qwiic
The BH1750 provides 16-bit light measurements in lux, the SI unit for measuring light, making it easy to compare against other values like references and measurements from other sensors. Erfahren Sie mehr -
Adafruit Adafruit Itsy Bitsy 32u4 - 5V 16MHz
Grösser als ein Trinket, kleiner als ein Feather: Das Itsy Bitsy mit dem Atmega 32u4. Erfahren Sie mehr -
YFRobot Valon-I Robot
Lern-Roboter mit vielen Sensoren Erfahren Sie mehrRegulärer Preis: CHF 109.90
Special Price CHF 59.90
-
Adafruit H3LIS331 Ultra High Range Triple-Axis Accelerometer - STEMMA QT / Qwiic
It’s not hard to find an accelerometer that can measure accelerations up to 16g, but if you need an accelerometer that can measure even larger amounts of acceleration, your options narrow (The ICM20649 is a great sensor and can measure up to ±30g). Erfahren Sie mehr -
Jumperkabel 40 Stk. F/F - 15CM - 24AWG
Set besteht aus: 40 Stk. Jumperkabel,F/F (Female/Female),Länge: 15cm, Tinned copper wire, 24AWG 11/0.16mm OD: 1.4MM ROHS
Erfahren Sie mehr -
Jumperkabel 40 Stk. M/M - 15CM - 24AWG
Jumperkabel 40 Stk. M/M Verbindungskabel - 15CM, Tinned copper wire, 24AWG 11/0.16mm OD: 1.4MM ROHS
Erfahren Sie mehr -
Jumperkabel 40 Stk. M/F - 15CM - 24AWG
Set besteht aus: 40 Stk. Jumperkabel,M/F(Male/Female) ,Länge: 15cm ,Tinned copper wire, 24AWG 11/0.16mm OD: 1.4MM ROHS
Erfahren Sie mehr -
GY ADXL337 Triple Accelerometer (Analog) Breakout Board (3.3V)
Breakout mit dem Analogen Accelerometer ADXL337 (3.3V) Erfahren Sie mehr -
YFRobot 4WD Car Alu, mit Lenkung und Differential, Kit (Rote Felgen)
YFRobot 4WD Car aus Aluminium, mit Lenkung und Differential für die Hinterachse, Kit, inkl. Motoren (Bausatz) Erfahren Sie mehr -
Jumperkabel 10 Stk. M/M - 10CM - 22AWG - Blau
Set besteht aus: 10 Stk. Jumperkabel,M/M (Male/Male),Länge: 10cm ,Tinned copper wire, 22AWG 17/0.16mm OD: 1.6MM ROHS
Erfahren Sie mehr -
Jumperkabel 10 Stk. M/M - 10CM - 22AWG - Rot
Set besteht aus: 10 Stk. Jumperkabel,M/M (Male/Male),Länge: 10cm ,Tinned copper wire, 22AWG 17/0.16mm OD: 1.6MM ROHS
Erfahren Sie mehr -
Jumperkabel 10 Stk. M/M - 10CM - 22AWG - Schwarz
Set besteht aus: 10 Stk. Jumperkabel,M/M (Male/Male),Länge: 10cm ,Tinned copper wire, 22AWG 17/0.16mm OD: 1.6MM ROHS
Erfahren Sie mehr -
Arduino MKR Mem Shield
2MB Flash + microSD-Kartenleser für die Arduino MKR-Serie Erfahren Sie mehr -
Keyes MiFare Classic (13.56 MHz) RFID-Tag Key chain
Keyes MiFare Classic (13.56 MHz) RFID-Tag als Schlüsselanhänger Erfahren Sie mehr -
YF 30kg.cm Digital Power Servo YF-6130MG
180 Grad Rotation (90 Grad pro Richtung), Power Servo von YF mit einem Torque von 30kg/cm Erfahren Sie mehr -
1-Kanal Relais Modul Karte 5V / 30VDC mit Kabel
1-Kanal Relais Modul - 3.3V / 5V DC inkl. Anschlusskabel
Erfahren Sie mehr -
YFRobot 4WD Car Alu, mit Lenkung, Kit (Rote Felgen)
YFRobot 4WD Car aus Aluminium, mit Lenkung, Kit, inkl. Motoren (Bausatz) Erfahren Sie mehr -
MiFare Classic (13.56 MHz) RFID-Tag Key chain
MiFare Classic (13.56 MHz) RFID-Tag als Schlüsselanhänger Erfahren Sie mehr -
Keyes Breakout mit dem BMP280 (Barometer / Höhensensor)
Messen Sie Druck, Temperatur und Höhe mit einem kleinen Breakout Erfahren Sie mehr -
Keyes JoyStick Breakout
PSP-Daumen Joystick / Thumb-Stick Breakout-Board von Keyes inkl. Montagelöcher Erfahren Sie mehr -
Keyes Lichtschranke / Infrarot-Sensor
Keyes Studio Lichtschranke / Infrarot-Sensor Erfahren Sie mehr -
Keyes TTP229 16-way capactive touch board
Keyes TTP229 16-way capactive touch board Erfahren Sie mehr -
Adafruit RGB Matrix Shield for Arduino
If you've got an Arduino-compatible board, this shield will make usage of an RGB-Matrix a snap Erfahren Sie mehr -
Pimoroni Explorer HAT Pro
Explorer HAT Pro fügt Ihrem Raspberry Pi eine Menge nützlicher Werkzeuge hinzu. Erfahren Sie mehr -
Adafruit CCS811 Air Quality Sensor Breakout - VOC and eCO2
Breathe easy - we finally have an I2C VOC/eCO2 sensor in the Adafruit shop! Add air quality monitoring to your project and with an Adafruit CCS811 Air Quality Sensor Breakout. Erfahren Sie mehr
