Sie haben keine Artikel im Warenkorb.
Suchergebnisse für 'accel'
-
Particle Sensor Kit 3G – Eur/Afr/Asia
Quantify the world! The Sensor Kit from Particle is a curated mix of awesome sensors and electrical components specifically selected by the engineers on the Particle Team. Erfahren Sie mehrCHF 199.90 -
Excamera Gameduino 3
Gameduino 3 adds a bright 4.3 inch touchscreen to the Arduino. It features amazing graphics, audio and video from the FT810 GPU -- right in your hand. It is by far the most capable graphics shield for the Arduino, and many find it the easiest to use. Erfahren Sie mehrRegulärer Preis: CHF 54.90
Special Price CHF 44.90
Zur Zeit Ausverkauft
-
SparkFun Triple Axis Accelerometer Breakout - H3LIS331DL
The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power, high-g accelerometer with I2C and SPI interface options. Erfahren Sie mehr -
SparkFun ESP32 Thing Motion Shield
The SparkFun ESP32 Thing Motion Shield is a versatile, motion-sensing addition to our ESP32 Thing. Erfahren Sie mehr -
AI Tinker NodeMCU ESP-32S V.1 (ESP32-DevKitC)
Entwicklerborad von AI Tinker mit dem ESP32 - entspricht dem ESP32-DevKitC von Espressif Erfahren Sie mehr -
Teensy 4.0
Teensy 4.0 is the latest Teensy, offering the fastest microcontroller and powerful peripherals in the Teensy 1.4 by 0.7 inch form factor. It Erfahren Sie mehr -
GY ADXL337 Triple Accelerometer (Analog) Breakout Board (3.3V)
Breakout mit dem Analogen Accelerometer ADXL337 (3.3V) Erfahren Sie mehr -
Adafruit H3LIS331 Ultra High Range Triple-Axis Accelerometer - STEMMA QT / Qwiic
It’s not hard to find an accelerometer that can measure accelerations up to 16g, but if you need an accelerometer that can measure even larger amounts of acceleration, your options narrow (The ICM20649 is a great sensor and can measure up to ±30g). Erfahren Sie mehr -
Adafruit LSM6DSO32 6-DoF Accelerometer and Gyroscope - STEMMA QT / Qwiic
This lil IMU is like a big sister to the LSM6DSOX, it has the same pin out and firmware - but the accelerometer component can go up to 32g instead of the normal 16g maximum. Erfahren Sie mehr -
SparkFun 9DoF IMU Breakout - ICM-20948 (Qwiic)
The SparkFun 9DoF IMU Breakout incorporates all the amazing features of Invensense's ICM-20948 into a Qwiic-enabled breakout board complete with a logic shifter and broken out GPIO pins for all your motion sensing needs. Erfahren Sie mehr -
Adafruit PyBadge for MakeCode Arcade, CircuitPython or Arduino
What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino? That's right, its the Adafruit PyBadge! Erfahren Sie mehr -
SparkFun Thing Plus - ESP32-S2 WROOM
The SparkFun ESP32-S2 WROOM Thing Plus is a highly-integrated, Feather form-factor development board equipped with a 2.4 GHz WiFi System-on-Chip (SoC), from Espressif. Erfahren Sie mehr -
Adafruit PyBadge LC - MakeCode Arcade, CircuitPython, or Arduino - Low Cost Version
What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino even when you're on a budget? That's right, it's the Adafruit PyBadge LC! Erfahren Sie mehr -
SparkFun OpenLog Artemis
The SparkFun OpenLog Artemis is an open source data logger that comes preprogrammed to automatically log IMU, GPS, serial data, and various pressure, humidity, and distance sensors. Erfahren Sie mehr -
SparkFun Qwiic Haptic Driver - DA7280
The SparkFun Qwiic Haptic Driver includes an itty-bitty, Linear Resonant Actuator (LRA) vibration motor and Dialog Semiconductor's DA7280 motor driver IC for applications that require haptic feedback. Erfahren Sie mehr -
Adafruit MSA311 Triple Axis Accelerometer - STEMMA QT / Qwiic
The MSA311 is a super small and low-cost triple-axis accelerometer. It's inexpensive, but has just about every 'extra' you'd want in an accelerometer. Erfahren Sie mehr -
ADXL343 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI - STEMMA QT / Qwiic
The sensor has three axes of measurements, X Y Z, and pins that can be used either as I2C or SPI digital interfacing. You can set the sensitivity level to either +-2g, +-4g, +-8g or +-16g. Erfahren Sie mehr -
Adafruit ESP32-S3 Feather with STEMMA QT / Qwiic - 8MB Flash No PSRAM
The ESP32-S3 has arrived in Feather format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this Feather is great for powering your IoT projects. Erfahren Sie mehr -
Adafruit Triple-axis Magnetometer - MMC5603 - STEMMA QT / Qwiic
Sense the magnetic fields surrounding us with this handy triple-axis magnetometer (compass) module. Magnetometers can sense where the strongest magnetic force is coming from, generally used to detect magnetic north, but can also be used for measuring magnetic fields. Erfahren Sie mehr -
SparkFun Thing Plus - ESP32 WROOM (USB-C)
The SparkFun ESP32 WROOM Thing Plus with USB-C is a great place to get started with Espressif IoT ideations while still enjoying all the amenities of the original ESP32 WROOM Thing Plus. Erfahren Sie mehr -
SparkFun IoT RedBoard - ESP32 Development Board
The SparkFun IoT RedBoard is an ESP32 Development Board that includes everything but the kitchen sink! Erfahren Sie mehr -
SparkFun Essential Sensor Kit V2
Set mit vielen verschiedenen Sensoren - Temperatur, Magnet, Infrarot uvm. Erfahren Sie mehr -
SparkFun 6DoF IMU Breakout - LSM6DSV16X (Qwiic)
Looking for an extremely accurate way to detect motion utilizing AI? We've got you covered with the Qwiic-enabled, SparkFun LSM6DSV16X 6DoF IMU Breakout. Erfahren Sie mehr -
SparkFun OpenLog Artemis (without IMU)
The SparkFun OpenLog Artemis is an open source data logger that comes preprogrammed to automatically log GPS, serial data, and various pressure, humidity, and distance sensors. Erfahren Sie mehr -
Adafruit LSM6DSOX + LIS3MDL - Precision 9 DoF IMU - STEMMA QT / Qwiic
Add high-quality motion, direction, and orientation sensing to your Arduino project with this all-in-one 9 Degree of Freedom (9-DoF) sensor with sensors from ST. This little breakout contains two chips that sit side-by-side to provide 9 degrees of full-motion data. Erfahren Sie mehr -
Teensy 4.1
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. Erfahren Sie mehr -
SparkFun MicroMod Qwiic Pro Kit
The MicroMod Qwiic Pro Kit provides you with a MicroMod Carrier, a MicroMod Processor, two sensors, a joystick, an OLED Screen, and all the cables you need to start utilizing Qwiic and I2C easily. Erfahren Sie mehrCHF 139.90 -
Adafruit 3-Achsen Accelerometer + Magnetometer Breakout LSM303AGR Qwiic
Auf diesem Modul befinden sich zwei Sensoren. Zum einen verfügt es über einen klassischen 3-Achen Accelerometer, welcher die Richtung zur Erde ausgibt, indem er die Gravitation misst. Der zweite Sensor ist ein Magnetometer, welcher die Richtung des stärksten Magnetfeldes misst, normalerweise des magnetischen Nordpols. Erfahren Sie mehr -
SparkFun Arduino UNO R4 WiFi Qwiic Kit
Das SparkFun Arduino UNO R4 WiFi Qwiic Kit enthält alles, was Sie benötigen, um das UNO R4 WiFi und das Qwiic-Ökosystem zusammen zu nutzen. Erfahren Sie mehrCHF 149.90
