Sie haben keine Artikel im Warenkorb.
Suchergebnisse für 'pin'
-
SparkFun 9DoF IMU Breakout - ICM-20948 (Qwiic)
The SparkFun 9DoF IMU Breakout incorporates all the amazing features of Invensense's ICM-20948 into a Qwiic-enabled breakout board complete with a logic shifter and broken out GPIO pins for all your motion sensing needs. Erfahren Sie mehr -
SparkFun ProDriver - Stepper Motor Driver (TC78H670FTG)
The SparkFun ProDriver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba! Erfahren Sie mehr -
SparkFun Qwiic Button - Green LED
The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an easy to use I2C device! Erfahren Sie mehr -
SparkFun USB to Micro-B Adapter
It's tiny, it's handy, and it can give your normal USB-equipped device a micro-B connector! Erfahren Sie mehr -
SparkFun LiPo Charger Plus
Mit dieser Iteration haben wir den Eingangsladestecker auf USB-C umgestellt und bieten eine Auswahl der Laderate sowie einen optionalen Wärmeschutz. Erfahren Sie mehr -
SparkFun Thing Plus - SAMD51
Mit einer 32-Bit ARM Cortex-M4F MCU ist das SparkFun SAMD51 Thing Plus eines unserer leistungsfähigsten Mikrocontroller-Boards überhaupt! Erfahren Sie mehr -
SparkFun Magnetic Screwdriver Set (20 Teile)
Jeder braucht irgendwann einen Schraubenzieher, also ist es am besten so vorbereitet wie möglich zu sein! Erfahren Sie mehr -
SparkFun Wireless Motor Driver Shield
Das SparkFun Wireless Motor Driver Shield wurde entwickelt, um den Anschluss von Motoren, Sensoren und anderen Komponenten an Ihr Arduino-basiertes Projekt so schnell und einfach wie möglich zu gestalten. Erfahren Sie mehr -
SparkFun LoRa Gateway - 1-Channel (ESP32)
Das SparkFun 1-Kanal LoRa Gateway ist ein starkes 3-Netzwerk-fähiges Gerät - dank eines integrierten ESP32 WROOM Moduls und eines RFM95W LoRa Modems. Erfahren Sie mehr -
SparkFun I2S Audio Breakout - MAX98357A
Das SparkFun I2S Audio Breakout Board verwendet den Digital-Analog-Wandler (DAC) MAX98357A, der I2S-Audio in ein analoges Signal umwandelt. Erfahren Sie mehr -
SparkFun RedBoard Edge
Das SparkFun RedBoard Edge ist eine raffinierte Überarbeitung des SparkFun RedBoard, die für den Einbau in Ihr individuelles Projektgehäuse entwickelt wurde. Erfahren Sie mehr -
RGB LED Panel - 32x32
32x32 RGB LED Panel, 19x19cm Erfahren Sie mehr -
SparkFun ESP32 Thing Motion Shield
The SparkFun ESP32 Thing Motion Shield is a versatile, motion-sensing addition to our ESP32 Thing. Erfahren Sie mehr -
SparkFun Triple Axis Accelerometer Breakout - H3LIS331DL
The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power, high-g accelerometer with I2C and SPI interface options. Erfahren Sie mehr -
SparkFun Sound Detector with Headers
The Sound Detector is a small and very easy to use audio sensing board with three different outputs - with presoldered Headers Erfahren Sie mehr -
SparkFun Motor Driver - Dual TB6612FNG (1A)
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Erfahren Sie mehr -
SparkFun LiPo Charger/Booster - 5V/1A
The SparkFun 5V/1A LiPo Charger/Booster is a no-nonsense circuit for generating one amp from a Lithium Polymer battery at 5V. Erfahren Sie mehr -
SparkFun Si7021 Feuchtigkeits-Sensor Breakout
Der Si7021 ist ein günstiger, einfach zu benutzender, aber trotzdem sehr genauer digitaler Feuchtigkeits und Temperatur-Sensor. Erfahren Sie mehr -
ZX Distance and Gesture Sensor
The ZX Distance and Gesture Sensor is a touchless sensor that is capable of looking for simple gestures. Erfahren Sie mehr -
SparkFun Tiny AVR Programmer
Praktischer USB-Programmer inkl. Sockel für ATtiny45 und 85 Erfahren Sie mehr -
SparkFun ESP32 Thing Power Control Shield
The SparkFun ESP32 Thing Power Control Shield enables the ESP32 Thing to switch up to 5A of a DC load, providing a wide variety of options to control your next project! Erfahren Sie mehr -
SparkFun Ardumoto Shield Kit
The SparkFun Ardumoto Shield Kit is perfect for any robot enthusiast and includes an Ardumoto Shield, as well as pairs of tires, motors, connectors and wires. Erfahren Sie mehr -
SparkFun Opto-isolator Breakout
This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. Erfahren Sie mehr -
SparkFun Serial Basic Breakout - CH340G
USB-zu-Serial Wandler mit dem CH340-Treiber. VIa Lötbrücke für 3.3V (Standard) und 5V geeignet. Erfahren Sie mehr -
SparkFun Wireless Joystick Kit
The SparkFun Wireless Joystick Kit provides an easy way to control your next XBee project. Erfahren Sie mehr -
SparkFun ESP32 Thing
Board mit dem Espressif ESP32, der aufgebohrten Version des ESP8266. Erfahren Sie mehr -
SparkFun Haptic Motor Driver - DRV2605L
Ready to add some good vibes to your project? Look no further than the SparkFun Haptic Motor Driver. Erfahren Sie mehr -
SparkFun ToF Range Finder Breakout - VL6180
This is the SparkFun “Time-of-Flight” Range Finder, a breakout for the VL6180 distance sensor. Erfahren Sie mehr -
SparkFun Photon RedBoard
Ein WiFI/Mikrocontroller Entwicklungsboard im Arduino-Formfaktor für Photon Erfahren Sie mehr -
SparkFun Johnny-Five Inventor's Kit
Kit mit einem Tessel 2 für den Einstieg in die Programmierung mit dem Johnny-Five Framework (basierend auf Javascript) Erfahren Sie mehrCHF 159.90
