You have no items in your shopping cart.
Search results for 'oled'
-
Adafruit Monochrome 128x32 OLED graphic display
These displays are small, only about 1" diagonal, but very readable due to the high contrast of an OLED display. Learn More -
Monochrome 1.3" 128x64 OLED graphic display - STEMMA QT / Qwiic
These displays are small, only about 1.3" diagonal, but very readable due to the high contrast of an OLED display. Learn More -
Adafruit OLED Breakout Board - 16-bit Color 1.5" w/microSD holder
Our big 1.5" color OLED displays are perfect when you need a small display with vivid, high-contrast 16-bit color. Learn More -
OLED Breakout Board - 16-bit Color 0.96" + microSD
Our new 0.96" color OLED displays are perfect when you need an ultra-small display with vivid, high-contrast 16-bit color. Learn More -
Adafruit Trinket - 3.3V
It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. Learn More -
Adafruit Trinket - 5.0V
It's a tiny microcontroller board, built around the Atmel ATtiny85, a little chip with a lot of power. Learn More -
Adafruit OLED Breakout Board - 16-bit Color 1.27" + microSD
This OLED uses the SSD1351 driver chip, which manages the display. You can talk to the driver chip using 4-wire write-only SPI (clock, data, chip select, data/command and an optional reset pin). Learn More -
MicroView - OLED Arduino compatible Module
The MicroView is the first chip-sized Arduino compatible module that lets you see what your Arduino is thinking using a built-in OLED display. Learn More -
Adafruit FT232H Breakout - USB-C/Stemma to GPIO+SPI+I2C
The FT232H breakout is like adding a little swiss army knife for serial protocols to your computer! Learn More -
SparkFun MicroView - USB Programmer
This USB programmer connects directly to the MicroView and lets you not only program the module, but use it to interface with your computer, Rapsberry Pi, or other USB device. Learn More -
Adafruit i2c / SPI character LCD backpack
LCD backpacks reduce the number of pins needed to connect to an LCD. Learn More -
Makeblock Me RGB LED V1.1
With integrated chip, you can control each LED individually to adjust its brightness and creat any color by mixing different amounts of red, green, blue. Learn More -
Adafruit Monochrome 0.96" 128x64 OLED graphic display
These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip. Learn More -
Adafruit Monochrome 2.7" 128x64 OLED Graphic Display Module
These displays are 2.7" diagonal, and very readable due to the high contrast of an OLED display. Learn More -
Adafruit Monochrome 2.3" 128x32 OLED Graphic Display Module Kit
Monochrome graphical OLED-display,128x32 Pixels, 2.3" Learn More -
Adafruit FeatherWing OLED - 128x32 OLED (Feather Add-On)
This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board. Learn More -
Digilent ChipKit Basic I/O-Shield
The chipKIT™ Basic I/O Shield is an input/output expansion board designed for use with chipKIT microcontroller boards. Learn More -
Arduino Lucky Shield w/BME 280
Ein Shield mit vielen Sensoren: Druck, Höhe, Helligkeit, Temperatur, Bewegung - das perfekte IOT Shield Learn More -
Adafruit DotStar High Density 8x8 Grid - 64 RGB LED Pixel Matrix
Do not eat this LED grid just because it is so colorful and bite-sized! This is the tiniest little LED grid we could make, with 64 full RGB color pixels in a square that is only 1" by 1" square (thats 25.4mm x 25.4mm for you metric-lovers). Learn More -
SparkFun TeensyView
The SparkFun TeensyView brings you an easy way to add a small, white-on-black OLED to your Teensy development board. Learn More -
Adafruit PiOLED - 128x32 Monochrome OLED for Raspberry Pi
If you're looking for the most compact li'l display for a Raspberry Pi (incluing a Pi Zero) project, this might be just the thing you need! Learn More -
Adafruit Trinket M0 - für CircuitPython & Arduino IDE
The Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot of power. Learn More -
OLED Expansion Board for Onion Omega
The OLED Expansion Board adds a low-power 0.96″ monochrome display to your Omega. With a resolution of 128×64, you can use it to display text, images and even animations. Learn More -
Particle Maker Kit with Photon
The Particle Maker Kit has just about everything you need to get started with your Particle Photon. Learn More -
OLED Modul 0.96",128 x 64 Pixel, I2C, Blau - mit Box
Klein aber Oho: Dieses OLED-Modul mit einer Auflösung von 128 x 64 Pixel ist nur gerade 27.3mm x 27.8mm gross! Learn More -
OLED Modul 0.96",128 x 64 Pixel, I2C, Gelb und Blau - mit Box
Klein aber Oho: Dieses OLED-Modul mit einer Auflösung von 128 x 64 Pixel ist nur gerade 27.3mm x 27.8mm gross! Learn More -
E-Design ES120 Motion Control Screwdriver
Experience the next generation of electric screwdrivers - old down the button and turn the wrist in the desired direction - the screw is loosened or tightened. Learn More -
OLED Modul 0.96",128 x 64 Pixel, I2C, Weiss - mit Box
Klein aber Oho: Dieses OLED-Modul mit einer Auflösung von 128 x 64 Pixel ist nur gerade 27.3mm x 27.8mm gross! Learn More -
OLED Modul 1.3" / 128 x 64 Pixel, SPI , Weiss, SH1106 - mit Box
Klein aber Oho: Dieses OLED-Modul mit einer Auflösung von 128 x 64 Pixel ist nur gerade 33.3mm x 35.5mm gross! Learn More -
OLED Modul 1.3" / 128 x 64 Pixel, SPI , Blau, SH1106 - mit Box
Klein aber Oho: Dieses OLED-Modul mit einer Auflösung von 128 x 64 Pixel ist nur gerade 33.3mm x 35.5mm gross! Learn More
