Bricklets
Bricklets can be used to extend the features of Bricks. There are Bricklets to measure physical quantity such as rotation, voltage, current and ambient light as well as Bricklets for control purposes such as switching relays, digital input/output and alphanumeric output on LCDs.
Unlike Bricks, Bricklets have no fixed size. Each Bricklet has the minimum size possible. Each Brick has up to four connectors for Bricklets.
On startup a Brick detects connected Bricklets. The Bricklet plugins, stored in the EEPROM of the Bricklet, are loaded into the flash of the Brick. This adds new functions to the Brick, that can then be used from the PC.
-
Tinkerforge Air Quality Bricklet
Measures IAQ (indoor air quality) index, air pressure, humidity and temperature, Configurable temperature compensation for use cases in enclosures Learn More -
Tinkerforge Ambient Light Bricklet
Measures ambient light up to 900lux Learn More -
Tinkerforge Barometer Bricklet
Measures air pressure and altitude changes Learn More -
Tinkerforge Breakout Bricklet
The Breakout Bricklet is a breakout board for Bricklets. It makes all signals of the Bricklet connector available. Learn More -
Tinkerforge CAN Bricklet 2.0
Sends and receives data through CAN bus with configurable baudrate, modes and filters Learn More -
Tinkerforge DMX Bricklet
Supports DMX slave and master, Has male and female XLR connector Learn More -
Tinkerforge Dual Button Bricklet
The Dual Button Bricklet is equipped with two buttons and can extend Bricks. Learn More -
Tinkerforge Dust Detector Bricklet
Measures dust density between 0 and 500µg/m³ Learn More -
Tinkerforge GPS Bricklet 2.0
Sends and receives data through CAN bus with configurable baudrate, modes and filters Learn More -
Tinkerforge Humidity Bricklet 2.0
Measures relative humidity and temperature, Output in 0.01%RH / 0.01°C steps (14 bit resolution), Internal heater and internal compensation Learn More -
Tinkerforge Industrial Counter Bricklet
4 channel galvanically isolated frequency counter, Configurable edge count per channel Learn More -
Tinkerforge Industrial Dual Relay Bricklet
Two relays to switch AC/DC devices, Switches up to 240VAC/10A and 30VDC/7A Learn More -
Tinkerforge IO-16 Bricklet
16-channel digital input/output with switchable logic voltage 3.3V or 5V* and configurable pull-ups and interrupts Learn More -
Tinkerforge IO-4 Bricklet 2.0
4-channel digital input/output, Fixed 3.3V logic voltage, Configurable pull-ups and interrupts, PWM output with frequency up to 32MHz Learn More -
Tinkerforge Joystick Bricklet
2-axis joystick with push-button Learn More -
Tinkerforge LCD 20x4 Bricklet 1.2
20x4 character alphanumeric display with switchable blue backlight and 4 push-buttons Learn More -
Tinkerforge LED Strip Bricklet
Controls up to 320 RGB LEDs (WS2801) Learn More -
Tinkerforge Line Bricklet
Measures the reflectivity of a surface, can be used to detect/follow lines Learn More -
Tinkerforge NFC/RFID Bricklet
Can read and write Mifare Classic and NFC Forum Type 1 and 2 RFID/NFC tags Learn More -
Tinkerforge Outdoor Weather Bricklet
Receives data from outdoor weather station and indoor sensors, Measures Temperature, Humidity, Wind/Gust speed, Wind direction and Rainfall, can use up to 255 weather stations/sensors simultaneously Learn More -
Tinkerforge Particulate Matter Bricklet with Enclosure
Measures Particulate Matter concentration, Measures in µg/m³ for differenz sizes Learn More -
Tinkerforge Piezo Speaker Bricklet
Creates beeps with configurable frequency of 585Hz to 7100Hz Learn More -
Tinkerforge PTC Bricklet
Precision current sensor, measures currents between 0 and 22.5mA, can read out any IEC 60381-1 type 2 and type 3 sensor Learn More -
Tinkerforge Real-Time Clock Bricklet
Battery-backed real-time clock, hundredth of a second time resolution and low power consumption in battery mode Learn More -
Tinkerforge Remote Switch Bricklet
Precision current sensor, measures currents between 0 and 22.5mA, can read out any IEC 60381-1 type 2 and type 3 sensor Learn More -
Tinkerforge RGB LED Button Bricklet
High quality 15mm x 15mm button with adjustable RGB LED backlight Learn More -
Tinkerforge Rotary Encoder Bricklet 2.0
360° rotary encoder, counts 24 steps per rotation (step angle 15°), Integrated push-button Learn More -
Tinkerforge RS232 Bricklet 2.0
Sends and receives serial data, RS-232 and UART-TTL interface Learn More -
Tinkerforge Segment Display 4x7 Bricklet V1.0
Four 7-segment displays with switchable colon, Brightness of segments configurable Learn More -
Tinkerforge Sound Pressure Level Bricklet
Measures sound pressure level in dB(A/B/C/D/Z) and ITU-R 468, Measures spectrum with up to 512 bins and up to 80 samples per second Learn More
Minimal Price: 5.90