You have no items in your shopping cart.
Search results for 'breadboard'
-
Button Sortiment mit 140 Buttons / 15 Typen - mit Box
15 verschiedene Pushbuttons für PCB/Breadboards, Total 140 Stk. Learn More -
Jumperkabel 10 Stk. M/M - 10CM - 22AWG - Schwarz
Set besteht aus: 10 Stk. Jumperkabel，M/M (Male/Male)，Länge: 10cm ，Tinned copper wire， 22AWG 17/0.16mm OD: 1.6MM ROHS
Learn More -
Jumperkabel 10 Stk. M/M - 10CM - 22AWG - Rot
Set besteht aus: 10 Stk. Jumperkabel，M/M (Male/Male)，Länge: 10cm ，Tinned copper wire， 22AWG 17/0.16mm OD: 1.6MM ROHS
Learn More -
Jumperkabel 10 Stk. M/M - 10CM - 22AWG - Blau
Set besteht aus: 10 Stk. Jumperkabel，M/M (Male/Male)，Länge: 10cm ，Tinned copper wire， 22AWG 17/0.16mm OD: 1.6MM ROHS
Learn More -
Jumperkabel 40 Stk. M/F - 15CM - 24AWG
Set besteht aus: 40 Stk. Jumperkabel，M/F(Male/Female) ，Länge: 15cm ，Tinned copper wire， 24AWG 11/0.16mm OD: 1.4MM ROHS
Learn More -
Jumperkabel 40 Stk. M/M - 15CM - 24AWG
Jumperkabel 40 Stk. M/M Verbindungskabel - 15CM, Tinned copper wire， 24AWG 11/0.16mm OD: 1.4MM ROHS
Learn More -
Jumperkabel 40 Stk. F/F - 15CM - 24AWG
Set besteht aus: 40 Stk. Jumperkabel，F/F (Female/Female)，Länge: 15cm, Tinned copper wire， 24AWG 11/0.16mm OD: 1.4MM ROHS
Learn More -
Adafruit Micro SD SPI or SDIO Card Breakout Board - 3V ONLY!
Tthis breakout is not fixed for SPI usage, and can be used with SDIO hardware support. Learn More -
Adafruit AP3429A/TLV62569 3.3V Buck Converter Breakout - 3.3V Output 1.2A Max
This little buck converter based on the AP3429A is super handy, taking up to 5.5V input and providing a 3.3V output with up to 1.2A current. Learn More -
NeoPixel / WS2812 Diffused 5mm Through-Hole LED - 10 Pack
Each LED looks just like your classic through-hole 5mm RGB LED with 4 legs, but instead of just red/green/blue there's a little chip inside that can control the LED with high speed PWM for 24-bit color. Learn More -
Federklemme 4Pin - PCB Mount - Front
Federklemme mit 4 Pins für stabile Verbindungen bis 150V bei 2A, Einsteckrichtung vorne Learn More -
Federklemme 2Pin - PCB Mount - Front
Federklemme mit 2 Pins für stabile Verbindungen bis 150V bei 2A, Einsteckrichtung vorne Learn More -
MPM3610 5V Buck Converter Breakout - 21V In 5V Out at 1.2A
This little buck converter based on the MPM3610 is a marvel, taking up to 21V input and providing a 5V output with up to 1.2A current. Learn More -
SparkFun 9DoF IMU Breakout - ICM-20948 (Qwiic)
The SparkFun 9DoF IMU Breakout incorporates all the amazing features of Invensense's ICM-20948 into a Qwiic-enabled breakout board complete with a logic shifter and broken out GPIO pins for all your motion sensing needs. Learn More -
Keyes ESP32 Core Board
Entwicklerboard von Keyes mit dem ESP32 - alle Pins herausgebrochen, USB Learn More -
Adafruit LTR390 UV Light Sensor - STEMMA QT / Qwiic
The LTR390 is one of the few low-cost UV sensors available, and it's a pretty nice one! With both ambient light and UVA sensing with a peak spectral response between 300 and 350nm. You can use it for measuring how much sun you can get before needing to covering up. Learn More -
Half-Size Acryl-Montageplatte für Raspberry Pi3 B und B+
Acryl-Montageplatte für Raspberry Pi3 B und B+ für Half-Size-Breadboard Learn More -
10 Stk. Mini Schiebe Schalter / Slide Switch - ON/ON - Griffhöhe 6mm
Simple Slide Switches, only 8.5mm x 3.5mm, 2.54mm Grid, Set of 10 Learn More -
Adafruit SMT Breakout PCB for SOIC-20 or TSSOP-20 - 3 Pack!
One side has a 20-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 20-SOIC. Learn More -
Adafruit SMT Breakout PCB for SOIC-8, MSOP-8 or TSSOP-8 - 6 Pack!
One side has a 8-TSSOP/8-MSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 8-SOIC Learn More -
Adafruit SMT Breakout PCB for SOIC-16 or TSSOP-16 - 3 Pack!
One side has a 16-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 16-SOIC. Learn More -
Adafruit SMT Breakout PCB for SOIC-28 or TSSOP-28 - 3 Pack!
One side has a 28-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 28-SOIC. Learn More -
Adafruit TPS62827 3.3V Buck Converter Breakout - 3.3V Output 2 Amp Max
This little buck converter based on the TPS62827 is super handy, taking up to 5.5V input and providing a 3.3V output with up to 2A current. Learn More -
Adafruit AirLift – ESP32 WiFi Co-Processor Breakout Board
Give your plain ol' microcontroller project a lift with the Adafruit AirLift - a breakout board that lets you use the powerful ESP32 as a WiFi co-processor. Learn More -
Adafruit LPS35HW Water Resistant Pressure Sensor - STEMMA QT
The ST LPS35HW is a water resistant barometric pressure and temperature sensor that is also safe to use in wet environments. The sensing element is nestled safely in a ceramic package and is encased in a waterproof gel that prevents water that gets into the sensor from interfering with readings. Learn More -
Adafruit TMP117 ±0.1°C High Accuracy I2C Temperature Sensor
The TMP117 Precision Temperature Sensor is an I2C temperature sensor that will help you easily add temperature measurement and adjustment to your project. Learn More -
Keyes Gesten + Oled + Nano Kit
Komplettes Kit zur Gestenerkennung mit dem Arduino Learn More -
Adafruit HTU31 Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic
The HTU31-D is the third generation of temperature-humidity sensors from TE and great for sensing temperature and humidity, with excellent specifications. Learn More -
Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout - STEMMA QT / Qwiic
The MCP9808 digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard I2C. Learn More -
Keyes Acryl mounting plate for breadboard and Arduino UNO / Mega
Keyes Acryl mounting plate for breadboard and Arduino UNO / Mega Learn More
