You have no items in your shopping cart.
Search results for 'PRO MICRO'
-
Pololu Dual MC33926 Motor Driver Shield for Arduino
This shield makes it easy to control two brushed DC motors with your Arduino or Arduino-compatible board. Its dual MC33926 motor drivers operate from 5 to 28 V and can deliver a continuous 3 A per motor. Learn More -
Pololu Dual VNH5019 Motor Driver Shield for Arduino
Get your Arduino moving! This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor, or a continuous 24 A (60 A peak) to a single motor connected to both channels. Learn More -
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
HAT für den Raspberry Pi (alle Modelle) um 4 DC- oder 2 Stepper-Motoren mit vollem PCM-Support zu steuern. Learn More -
Big Dome Push Button 60mm - Green
A 60 diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Learn More -
Big Dome Push Button 60mm - Yellow
A 60 diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Learn More -
Big Dome Push Button 60mm - White
A 60 diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Learn More -
Big Dome Push Button 60mm - Blue
A 60 diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal microswitch. Learn More -
SparkFun Load Cell Amplifier - HX711
The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. Learn More -
Makeblock Me Orion (Based on Arduino UNO)
Makeblock Orion is an easy-to-use mainboard based on Arduino Uno with improvements for education. It provides eight RJ25 ports to connect to all the other Me series modules. Learn More -
Makeblock Me Micro Switch B
Me Micro Switch is a physical switch. It sends a signal to the controller when it is triggered. It is perfect to use in conjunction with makeblock components. Learn More -
Adafruit Bluefruit LE SPI Friend - Bluetooth Low Energy (BLE)
The Bluefruit LE SPI Friend makes it easy to add Bluetooth Low Energy connectivity to anything with 4 or 5 GPIO pins. With SPI, you don't have to worry about baud rates, flow control, or giving up a hardware UART port Learn More -
Adafruit Micro Lipo w/MicroUSB Jack - USB LiIon/LiPoly charger
Kleiner Charger für LiIon & LiPoly-Akkus 3.7V / 4.2V, mit MicroUSB-Anschluss Learn More -
AI Tinker WiFi Module - ESP8266 ESP-01S
The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. Learn More -
Arduino Ethernet Shield 2 (without PoE-Module)
Original Arduino Ethernet Shield Version 2 - With this shield you can connect your Arduino to the network and even run a webserver! With W5500 Ethernet Controller and RJ45-Plug.
Learn More -
Adafruit BMP280 I2C/SPI Barometer & Höhensensor (Stemma Qt)
Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI! Learn More -
Adafruit HUZZAH ESP8266 Breakout
The ESP8266 processor from Espressif is an 80 MHz microcontroller with a full WiFi front-end (both as client and access point) and TCP/IP stack with DNS support as well. Learn More -
Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055
Bosch is the first company to get this right by taking a MEMS accelerometer, magnetometer and gyroscope and putting them on a single die with a high speed ARM Cortex-M0 based processor. Learn More -
Tinkerforge Dust Detector Bricklet
Measures dust density between 0 and 500µg/m³ Learn More -
Pimoroni Picade Controller PCB - PIM110
Arduino-Kompatibles Board für den Einsatz als Steuerplatine in Arcade-Projekten Learn More -
Adafruit Bluefruit LE Shield - Bluetooth LE for Arduino
Would you like to add powerful and easy-to-use Bluetooth Low Energy to your robot, art or other electronics project? Heck yeah! Learn More -
SparkFun 9 Degrees of Freedom IMU Breakout - LSM9DS1
The LSM9DS1 is a versatile, motion-sensing system-in-a-chip. It houses a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer. Learn More -
Huzzah! Adafruit IOT Feather ESP8266 - WiFi Starter Kit
OK you've signed up for Adafruit.io and you're ready to build something cool and Internet-connected. All you need is this starter kit which will get you going with lots of parts that go very well with our service and are the most common sensors and actuators you may want. Learn More -
APA102 (DotStar) LED-Strip 30 LED/Meter, 1 Meter
You can set the color/brightness of each LED to 24-bit color (8 bits each red green and blue). Because the clock and data is seperated, you can use any processor speed or type to control these strips. Learn More -
APA102 (DotStar) LED-Strip 60 LED/Meter, 1 Meter
You can set the color/brightness of each LED to 24-bit color (8 bits each red green and blue). Because the clock and data is seperated, you can use any processor speed or type to control these strips. Learn More -
APA102 (DotStar) LED-Strip 144 LED/Meter, 1 Meter
You can set the color/brightness of each LED to 24-bit color (8 bits each red green and blue). Because the clock and data is seperated, you can use any processor speed or type to control these strips. Learn More -
APA102 (DotStar) LED-Strip 30 LED/Meter, 5 Meters
You can set the color/brightness of each LED to 24-bit color (8 bits each red green and blue). Because the clock and data is seperated, you can use any processor speed or type to control these strips. 5 meter Reel Learn More -
APA102 (DotStar) LED-Strip 60 LED/Meter, 5 Meters
You can set the color/brightness of each LED to 24-bit color (8 bits each red green and blue). Because the clock and data is seperated, you can use any processor speed or type to control these strips. Reel with 5 Meters Learn More -
Adafruit Feather 32u4 Adalogger
Our take on an 'all-in-one' datalogger (or data-reader) with built in USB and battery charging. Its an Adafruit Feather 32u4 with a microSD holder ready to rock! Learn More -
SparkFun RedBoard - Programmed with Arduino
The SparkFun RedBoard combines the simplicity of the UNO’s Optiboot bootloader (which is used in the Pro series), the stability of the FTDI (which we all missed after the Duemilanove was discontinued) and the R3 shield compatibility of the latest Arduino UNO R3. Learn More -
Adafruit Silicon MEMS Microphone Breakout - SPW2430
Just like 'classic' electret microphones, MEMS mics can detect sound and convert it to voltage, but they don't need a bias resistor or amplifier, its all in one! Learn More