You have no items in your shopping cart.
Search results for '5v'
-
SparkFun MOSFET Power Switch and Buck Regulator (Low-Side)
The MOSFET Power Switch and Buck Regulator (Low-Side) can be powered with up to 12V and control up to 10A, all while providing a sweet 3.3V. Learn More -
SparkFun Arduino UNO R4 WiFi Qwiic Kit
The SparkFun Arduino UNO R4 WiFi Qwiic Kit has everything you need to start using the UNO R4 WiFi and Qwiic ecosystem together. Learn More -
SparkFun SAMD21 Mini Breakout
Wenn du bereit bist, dein Arduino-Wissen von älteren 8-Bit/16-MHz-Mikrocontrollern auf die nächste Stufe zu heben, ist das SparkFun SAMD21 Mini Breakout eine grossartige Wahl. Learn More -
SparkFun Atmospheric Sensor Breakout - BME280 (with Headers)
The SparkFun BME280 Atmospheric Sensor Breakout with Headers is the easy way to measure barometric pressure, humidity, and temperature readings all without taking up too much space. Learn More -
SparkFun Buck Regulator Breakout - 1.8V (AP3429A)
The SparkFun 1.8V Buck Regulator Breakout features the AP3429A from Diodes Inc., a 2A step-down DC-DC converter with an input voltage range of 2.7V to 5.5V. Learn More -
SparkFun Buck Regulator Breakout - 3.3V (AP3429A)
The SparkFun 3.3V Buck Regulator Breakout features the AP3429A from Diodes Inc., a 2A step-down DC-DC converter with an input voltage range of 2.7V to 5.5V. Learn More -
SparkFun RP2040 mikroBUS Development Board
The SparkFun RP2040 mikroBUS Development Board is a low-cost, high performance platform with flexible digital interfaces featuring the Raspberry Pi Foundation's RP2040 microcontroller. Learn More -
SparkFun Level Shifter - Bi-Dir 8 Channel (TXS0108E)
The SparkFun 8 Channel Level Shifter Breakout features the TXS0108E™ 8-bit, bi-directional logic level translator from Texas Instruments. Learn More -
SparkFun Distance Sensor - 1.3 Meter, VL53L4CD (Qwiic)
This SparkFun Distance Sensor Breakout utilizes the VL53L4CD next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at short ranges for its size. Learn More -
SparkFun RedBoard Plus
The SparkFun RedBoard Plus is an Arduino-compatible development board that has everything you need in an Arduino Uno with many extra perks. Learn More -
SparkFun Qwiic Shield for Arduino
The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino Uno. Learn More -
SparkFun OpenScale
The SparkFun OpenScale is a simple-to-use, open source solution for measuring weight and temperature. Learn More -
Mini Microswitch - SPDT (Roller Lever)
Mini Microswitch - SPDT (Roller Lever) Learn More -
SparkFun IoT Starter Kit with Blynk Board
The SparkFun IoT Starter Kit with Blynk Board is a great way to gain a solid introduction to the world of Internet of Things (IoT) technology without any difficult programming. Learn More -
SparkFun Nano Power Timer - TPL5110
he SparkFun Nano Power Timer will run while only consuming minimal power (approximately 35nA) and turn your project on after a set amount of time. Learn More -
SparkFun LiPo Charger Plus
With this iteration, we've changed the input charge connector to USB-C and provided charge rate selection as well as optional thermal protection. Learn More -
SparkFun RedBot Sensor - Line Follower (Analog)
The Line Follower sensor is an add-on that gives your robot the ability to detect lines or nearby objects. Learn More -
SparkFun Wireless Motor Driver Shield
The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based project as fast and easy as possible. Learn More -
Rocker Switch - On/Off/On (Round)
This little round on/off/on toggle switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole. It’ll also look pretty slick in your project! Learn More -
SparkFun LoRa Gateway - 1-Channel (ESP32)
The SparkFun 1-Channel LoRa Gateway is a powerful 3-network capable device thanks to an onboard ESP32 WROOM module and an RFM95W LoRa modem. Learn More -
SparkFun I2S Audio Breakout - MAX98357A
The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analog converter (DAC), which converts I2S audio to an analog signal to drive speakers. Learn More -
SparkFun Teensy Arduino Shield Adapter
The Teensy Arduino Shield Adapter allows you to attach your Teensy and utilize your favorite Arduino shields without the requirement of a breadboard or any complicated wiring Learn More -
SparkFun RedBoard Edge
The SparkFun RedBoard Edge is a nifty little rework of the SparkFun RedBoard designed to be panel mounted in your custom project enclosure to allow for an easy way to make a clean, finished looking product. Learn More -
RGB LED Panel - 32x32
Yes, you read that right: a 32x32 LED matrix, that’s 1024 LEDs on a 7.5" x 7.5" board. Learn More -
SparkFun Motor Driver - Dual TB6612FNG (1A)
The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Learn More -
SparkFun LiPo Charger/Booster - 5V/1A
The SparkFun 5V/1A LiPo Charger/Booster is a no-nonsense circuit for generating one amp from a Lithium Polymer battery at 5V. Learn More -
SparkFun Lumenati 8-stick
Stick mit 8 APA102-LEDs (RGB) - kaskadierbar - benötigt nur zwei IOs zur Ansteuerung Learn More -
SparkFun Graphic LCD Serial Backpack
This is the serial backpack for graphic LCDs. The SparkFun Graphic LCD Serial Backpack interfaces to either our 160x128 pixel “Huge” Graphic LCD, or the smaller 128x64 pixel display Learn More -
ZX Distance and Gesture Sensor
The ZX Distance and Gesture Sensor is a touchless sensor that is capable of looking for simple gestures. Learn More -
SparkFun ESP32 Thing Power Control Shield
The SparkFun ESP32 Thing Power Control Shield enables the ESP32 Thing to switch up to 5A of a DC load, providing a wide variety of options to control your next project! Learn More