You have no items in your shopping cart.
Search results for 'breadboard'
-
Half-Size Acryl-Montageplatte für Raspberry Pi3 B und B+
Acryl-Montageplatte für Raspberry Pi3 B und B+ für Half-Size-Breadboard Learn More -
Adafruit LTR390 UV Light Sensor - STEMMA QT / Qwiic
The LTR390 is one of the few low-cost UV sensors available, and it's a pretty nice one! With both ambient light and UVA sensing with a peak spectral response between 300 and 350nm. You can use it for measuring how much sun you can get before needing to covering up. Learn More -
Keyes ESP32 Core Board
Entwicklerboard von Keyes mit dem ESP32 - alle Pins herausgebrochen, USB Learn More -
SparkFun 9DoF IMU Breakout - ICM-20948 (Qwiic)
The SparkFun 9DoF IMU Breakout incorporates all the amazing features of Invensense's ICM-20948 into a Qwiic-enabled breakout board complete with a logic shifter and broken out GPIO pins for all your motion sensing needs. Learn More -
MPM3610 5V Buck Converter Breakout - 21V In 5V Out at 1.2A
This little buck converter based on the MPM3610 is a marvel, taking up to 21V input and providing a 5V output with up to 1.2A current. Learn More -
Federklemme 2Pin - PCB Mount - Front
Federklemme mit 2 Pins für stabile Verbindungen bis 150V bei 2A, Einsteckrichtung vorne Learn More -
Federklemme 4Pin - PCB Mount - Front
Federklemme mit 4 Pins für stabile Verbindungen bis 150V bei 2A, Einsteckrichtung vorne Learn More -
NeoPixel / WS2812 Diffused 5mm Through-Hole LED - 10 Pack
Each LED looks just like your classic through-hole 5mm RGB LED with 4 legs, but instead of just red/green/blue there's a little chip inside that can control the LED with high speed PWM for 24-bit color. Learn More -
Adafruit AP3429A/TLV62569 3.3V Buck Converter Breakout - 3.3V Output 1.2A Max
This little buck converter based on the AP3429A is super handy, taking up to 5.5V input and providing a 3.3V output with up to 1.2A current. Learn More -
Adafruit Micro SD SPI or SDIO Card Breakout Board - 3V ONLY!
Tthis breakout is not fixed for SPI usage, and can be used with SDIO hardware support. Learn More -
Jumperkabel 40 Stk. F/F - 15CM - 24AWG
Set besteht aus: 40 Stk. Jumperkabel，F/F (Female/Female)，Länge: 15cm, Tinned copper wire， 24AWG 11/0.16mm OD: 1.4MM ROHS
Learn More -
Jumperkabel 40 Stk. M/M - 15CM - 24AWG
Jumperkabel 40 Stk. M/M Verbindungskabel - 15CM, Tinned copper wire， 24AWG 11/0.16mm OD: 1.4MM ROHS
Learn More -
Jumperkabel 40 Stk. M/F - 15CM - 24AWG
Set besteht aus: 40 Stk. Jumperkabel，M/F(Male/Female) ，Länge: 15cm ，Tinned copper wire， 24AWG 11/0.16mm OD: 1.4MM ROHS
Learn More -
Jumperkabel 10 Stk. M/M - 10CM - 22AWG - Blau
Set besteht aus: 10 Stk. Jumperkabel，M/M (Male/Male)，Länge: 10cm ，Tinned copper wire， 22AWG 17/0.16mm OD: 1.6MM ROHS
Learn More -
Jumperkabel 10 Stk. M/M - 10CM - 22AWG - Rot
Set besteht aus: 10 Stk. Jumperkabel，M/M (Male/Male)，Länge: 10cm ，Tinned copper wire， 22AWG 17/0.16mm OD: 1.6MM ROHS
Learn More -
Jumperkabel 10 Stk. M/M - 10CM - 22AWG - Schwarz
Set besteht aus: 10 Stk. Jumperkabel，M/M (Male/Male)，Länge: 10cm ，Tinned copper wire， 22AWG 17/0.16mm OD: 1.6MM ROHS
Learn More -
Button Sortiment mit 140 Buttons / 15 Typen - mit Box
15 verschiedene Pushbuttons für PCB/Breadboards, Total 140 Stk. Learn More -
Pimoroni Explorer HAT Pro
Explorer HAT Pro adds a lot of useful tools to your Raspberry Pi. Learn More -
Soft Tactile Button (8mm, 2Pin) / 10 Pieces
Put your project in stealth mode with these silent Soft Tactile Switch Buttons. 2 Pins, Set with 10 Pieces Learn More -
Onion Omega2+ Starter Kit
This kit includes everything you need to create eight different circuits that will teach you how to control LEDs, read inputs, control and read external sensors and displays, learn Python, and more. Learn More -
Soft Tactile Button (8mm) x 10
Put your project in stealth mode with these silent Soft Tactile Switch Buttons. Learn More -
Keyes OLED Modul 0.96",128 x 64 Pixel, I2C, Blau
Klein aber Oho: Dieses OLED-Modul mit einer Auflösung von 128 x 64 Pixel ist nur gerade 29mm x 29mm gross! Learn More -
Original Arduino Nano Every
Turn your ideas into a reality quickly with the new Arduino Nano Every. Learn More -
Original Arduino Nano 33 IoT
The ease of use of a Nano board with the addition of secure IoT and BT connectivity. Learn More -
GPIO Expansion Board für alle 40 Pin GPIO Pi inkl. Breadboard
Führt alle 40 GPIO eines Raspberry Pi ( Pi2, Pi3, Pi4) auf ein Breadboard heraus - hier im Set inkl. FullSize-Breadboard Learn More -
Jumperkabel 40 Stk. M/M - 10CM - 24AWG
Jumperkabel 40 Stk. M/M Verbindungskabel - 10CM, Tinned copper wire， 24AWG 11/0.16mm OD: 1.4MM ROHS
Learn More -
Jumperkabel 40 Stk. M/F - 10CM - 24AWG
Set besteht aus: 40 Stk. Jumperkabel，M/F(Male/Female) ，Länge: 10cm ，Tinned copper wire， 24AWG 11/0.16mm OD: 1.4MM ROHS
Learn More -
Jumperkabel 40 Stk. F/F - 10CM - 24AWG
Set besteht aus: 40 Stk. Jumperkabel，F/F (Female/Female)，Länge: 10cm, Tinned copper wire， 24AWG 11/0.16mm OD: 1.4MM ROHS
Learn More -
Jumperkabel / Verbindungskabel 10 Stk. M/M - 10CM Blau
10 Stk. Kabel M/M - 10CM Blau, Material: Kupfer
Learn More -
Jumperkabel / Verbindungskabel 10 Stk. M/M - 10CM Schwarz
10 Stk. Kabel M/M - 10CM Schwarz, Material: Kupfer
Learn More
