You have no items in your shopping cart.
Search results for 'ARDUINO PRO MICRO'
-
Adafruit QT Py RP2040
What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite chip, the RP2040. It's been made famous in the new Raspberry Pi Pico and our Feather RP2040 and ItsyBitsy RP2040, but what if we wanted something really smol? Learn More -
Adafruit ItsyBitsy RP2040
Featuring the Raspberry Pi RP2040! Small, powerful, with a ultra fast dual Cortex M0+ processor running at 125 MHz Learn More -
Adafruit NeoKey Trinkey - USB NeoPixel Mechanical Key Switch
It's half USB Key, half Adafruit Trinket, half mechanical keeb...it's NeoKey Trinkey, the circuit board with a Trinket M0 heart, a NeoPixel glow, and a Cherry MX-compatible. Learn More -
Adafruit AirLift – ESP32 WiFi Co-Processor Breakout Board
Give your plain ol' microcontroller project a lift with the Adafruit AirLift - a breakout board that lets you use the powerful ESP32 as a WiFi co-processor. Learn More -
Adafruit AW9523 GPIO Expander and LED Driver Breakout
Expand your project possibilities, with the Adafruit AW9523 GPIO Expander and LED Driver Breakout - a cute and powerful I2C expander with a lot of tricks up its sleeve. Learn More -
Adafruit PyBadge LC - MakeCode Arcade, CircuitPython, or Arduino - Low Cost Version
What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino even when you're on a budget? That's right, it's the Adafruit PyBadge LC! Learn More -
Adafruit BMP388 - Precision Barometric Pressure and Altimeter - STEMMA QT
The BMP3xx is the next-generation of sensors from Bosch and is the upgrade to the BMP280 - with a low altitude noise as low as 0.1m and the same fast conversion time. Learn More -
Adafruit LTR390 UV Light Sensor - STEMMA QT / Qwiic
The LTR390 is one of the few low-cost UV sensors available, and it's a pretty nice one! With both ambient light and UVA sensing with a peak spectral response between 300 and 350nm. You can use it for measuring how much sun you can get before needing to covering up. Learn More -
Adafruit PyBadge for MakeCode Arcade, CircuitPython or Arduino
What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino? That's right, its the Adafruit PyBadge! Learn More -
Adafruit LSM6DSO32 6-DoF Accelerometer and Gyroscope - STEMMA QT / Qwiic
This lil IMU is like a big sister to the LSM6DSOX, it has the same pin out and firmware - but the accelerometer component can go up to 32g instead of the normal 16g maximum. Learn More -
Adafruit BH1750 Light Sensor - STEMMA QT / Qwiic
The BH1750 provides 16-bit light measurements in lux, the SI unit for measuring light, making it easy to compare against other values like references and measurements from other sensors. Learn More -
Adafruit Adafruit Itsy Bitsy 32u4 - 5V 16MHz
Grösser als ein Trinket, kleiner als ein Feather: Das Itsy Bitsy mit dem Atmega 32u4. Learn More -
Adafruit RGB Matrix Shield for Arduino
If you've got an Arduino-compatible board, this shield will make usage of an RGB-Matrix a snap Learn More -
Adafruit CCS811 Air Quality Sensor Breakout - VOC and eCO2
Breathe easy - we finally have an I2C VOC/eCO2 sensor in the Adafruit shop! Add air quality monitoring to your project and with an Adafruit CCS811 Air Quality Sensor Breakout. Learn More -
2.0" 320x240 Color IPS TFT Display with microSD Card Breakout
This gorgeous IPS display breakout is the best way to add a small, colorful and bright display to any project, with excellent visibility from any angle. Learn More -
Adafruit VL53L0X Time of Flight Distance Sensor - 30 to 1000mm
The VL53L0X is a Time of Flight distance sensor like no other you've used Learn More -
Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500
This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging Learn More -
Adafruit ItsyBitsy M4 Express featuring ATSAMD51
Small, powerful, with a ultra fast ATSAMD51 Cortex M4 processor running at 120 MHz. Learn More -
Adafruit Adafruit Itsy Bitsy 32u4 - 3V 8MHz
Grösser als ein Trinket, kleiner als ein Feather: Das Itsy Bitsy mit dem Atmega 32u4. Learn More -
Adafruit Feather 328P - Atmega328P 3.3V @ 8 MHz
With this Feather we're getting a little nostalgic for the ATmega328P - the classic 'Arduino' chip - with this Adafruit Feather 328P running a 3.3V and 8 MHz. Learn More -
Adafruit PT1000 RTD Temperature Sensor Amplifier - MAX31865
The MAX31865 handles all of your RTD needs, and can even compensate 3 or 4 wire RTDs for better accuracy. Learn More -
Adafruit Trinket M0 - für CircuitPython & Arduino IDE
The Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot of power. Learn More -
Adafruit 0.96" 160x80 Color TFT Display w/ MicroSD Breakout - ST7735
It's the size of your thumbnail, with glorious 160x80 pixel color... it's the Adafruit Mini TFT Breakout! Learn More -
Adafruit HUZZAH32 – ESP32 Feather Board
The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module. Learn More -
Adafruit DotStar High Density 8x8 Grid - 64 RGB LED Pixel Matrix
Do not eat this LED grid just because it is so colorful and bite-sized! This is the tiniest little LED grid we could make, with 64 full RGB color pixels in a square that is only 1" by 1" square (thats 25.4mm x 25.4mm for you metric-lovers). Learn More -
Adafruit Feather M0 Express - for CircuitPython - ATSAMD21 Cortex M0
We love all our Feathers equally, but this Feather is very special. It's our first Feather that is specifically designed for use with CircuitPython! Learn More -
Adafruit Music Maker FeatherWing w/ Stereo 3W Amplifier
This powerful wing features the VS1053, an encoding/decoding (codec) chip that can decode a wide variety of audio formats such as MP3, AAC, Ogg Vorbis, WMA, MIDI, FLAC, WAV (PCM and ADPCM). You can do all sorts of stuff with the audio as well such as adjusting bass, treble, and volume digitally. Learn More -
Adafruit ADXL326 - 5V ready triple-axis accelerometer (+-16g analog out)
This breakout comes with 3 analog outputs for X, Y and Z axis measurements on a 0.75"x0.75" breakout board. Learn More -
Adafruit I2S MEMS Microphone Breakout - SPH0645LM4H
Just like 'classic' electret microphones, MEMS mics can detect sound and convert it to voltage, but they're way smaller and thinner. Learn More -
Adafruit 9-DOF Accel/Mag/Gyro+Temp Breakout Board - LSM9DS1
Add motion, direction and orientation sensing to your Arduino project with this all-in-one 9-DOF sensor. Inside the chip are three sensors, one is a classic 3-axis accelerometer, which can tell you which direction is down towards the Earth (by measuring gravity) or how fast the board is accelerating in 3D space. Learn More