You have no items in your shopping cart.
Search results for 'pin'
-
Adafruit SMT Breakout PCB for SOIC-16 or TSSOP-16 - 3 Pack!
One side has a 16-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 16-SOIC. Learn More -
Adafruit SMT Breakout PCB for SOIC-8, MSOP-8 or TSSOP-8 - 6 Pack!
One side has a 8-TSSOP/8-MSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 8-SOIC Learn More -
Adafruit SMT Breakout PCB for SOIC-20 or TSSOP-20 - 3 Pack!
One side has a 20-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 20-SOIC. Learn More -
Adafruit PyBadge for MakeCode Arcade, CircuitPython or Arduino
What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino? That's right, its the Adafruit PyBadge! Learn More -
Adafruit LSM6DSO32 6-DoF Accelerometer and Gyroscope - STEMMA QT / Qwiic
This lil IMU is like a big sister to the LSM6DSOX, it has the same pin out and firmware - but the accelerometer component can go up to 32g instead of the normal 16g maximum. Learn More -
MPM3610 5V Buck Converter Breakout - 21V In 5V Out at 1.2A
This little buck converter based on the MPM3610 is a marvel, taking up to 21V input and providing a 5V output with up to 1.2A current. Learn More -
Adafruit AP3429A/TLV62569 3.3V Buck Converter Breakout - 3.3V Output 1.2A Max
This little buck converter based on the AP3429A is super handy, taking up to 5.5V input and providing a 3.3V output with up to 1.2A current. Learn More -
Adafruit BH1750 Light Sensor - STEMMA QT / Qwiic
The BH1750 provides 16-bit light measurements in lux, the SI unit for measuring light, making it easy to compare against other values like references and measurements from other sensors. Learn More -
Adafruit Micro SD SPI or SDIO Card Breakout Board - 3V ONLY!
Tthis breakout is not fixed for SPI usage, and can be used with SDIO hardware support. Learn More -
Adafruit Adafruit Itsy Bitsy 32u4 - 5V 16MHz
Grösser als ein Trinket, kleiner als ein Feather: Das Itsy Bitsy mit dem Atmega 32u4. Learn More -
Adafruit H3LIS331 Ultra High Range Triple-Axis Accelerometer - STEMMA QT / Qwiic
It’s not hard to find an accelerometer that can measure accelerations up to 16g, but if you need an accelerometer that can measure even larger amounts of acceleration, your options narrow (The ICM20649 is a great sensor and can measure up to ±30g). Learn More -
Adafruit CCS811 Air Quality Sensor Breakout - VOC and eCO2
Breathe easy - we finally have an I2C VOC/eCO2 sensor in the Adafruit shop! Add air quality monitoring to your project and with an Adafruit CCS811 Air Quality Sensor Breakout. Learn More -
2.0" 320x240 Color IPS TFT Display with microSD Card Breakout
This gorgeous IPS display breakout is the best way to add a small, colorful and bright display to any project, with excellent visibility from any angle. Learn More -
Adafruit Ultimate GPS with USB - 66 channels /10 Hz updates
With the built in USB-to-Serial converter, you can now plug-n-play the Ultimate GPS into your computer, laptop, embedded Linux computer, and more. Learn More -
Adafruit MCP9600 I2C Thermocouple Amplifier - K, J, T, N, S, E, B and R Type T
Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The Adafruit MCP9600 does all that for you, and can be easily interfaced with any microcontroller or single-board-computer with I2C Learn More -
Adafruit AirLift FeatherWing – ESP32 WiFi Co-Processor
Give your Feather project a lift with the Adafruit AirLift FeatherWing - a FeatherWing that lets you use the powerful ESP32 as a WiFi co-processor Learn More -
Adafruit Quad Side-By-Side FeatherWing
This is the FeatherWing Quad Side-by-Side - a prototyping add-on and more for all Feather boards. Learn More -
Adafruit 2.7" Tri-Color ePaper Display with SRAM
This breakout has a 2.13" tri-color (red, black and white) display. It has 212x104 black and red ink pixels and a white-ish background. Learn More -
Small Liquid Crystal Light Valve - Controllable Shutter Glass
A Liquid Crystal Light Valve (LCLV) is a device that uses the properties of liquid crystals to control the level of illumination passing through an optical system Learn More -
Adafruit USB C Breakout Board - Downstream Connection
This breakout gives you all the basics you need and a resistor configuration that mimics classic USB 2.0 for a downstream connection Learn More -
Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500
This is the Adafruit Feather M0 WiFi w/ATWINC1500 - our take on an 'all-in-one' Arduino-compatible + high speed, reliable WiFi with built in USB and battery charging Learn More -
Adafruit Mini Color TFT with Joystick FeatherWing
Add a dazzling color display to your Feather project with this Adafruit Mini Color TFT with Joystick FeatherWing. Learn More -
Adafruit ItsyBitsy M4 Express featuring ATSAMD51
Small, powerful, with a ultra fast ATSAMD51 Cortex M4 processor running at 120 MHz. Learn More -
Adafruit Feather M4 Express - ATSAMD51 Cortex M4
This feather is powered by our new favorite chip, the ATSAMD51J19 - with its 120MHz Cortex M4 with floating point support and 512KB Flash and 192KB RAM. Learn More -
Adafruit NeoPXL8 FeatherWing for Feather M0 - 8 x DMA NeoPixels!
Handles all the NeoPixeling for you, up to 8 strands of concurrent DMA output each one can be 250 pixels long for a total of 8 x 250 = 2000 pixels Learn More -
Adafruit AS7262 6-Channel Visible Light / Color Sensor Breakout
This sensor from AMS has 6 integrated visible light sensing channels for red, orange, yellow, green, blue, and violet. Learn More -
Adafruit Adafruit Itsy Bitsy 32u4 - 3V 8MHz
Grösser als ein Trinket, kleiner als ein Feather: Das Itsy Bitsy mit dem Atmega 32u4. Learn More -
Particle Maker Kit with Photon
The Particle Maker Kit has just about everything you need to get started with your Particle Photon. Learn More -
Adafruit Feather 328P - Atmega328P 3.3V @ 8 MHz
With this Feather we're getting a little nostalgic for the ATmega328P - the classic 'Arduino' chip - with this Adafruit Feather 328P running a 3.3V and 8 MHz. Learn More -
Adafruit PT1000 RTD Temperature Sensor Amplifier - MAX31865
The MAX31865 handles all of your RTD needs, and can even compensate 3 or 4 wire RTDs for better accuracy. Learn More