You have no items in your shopping cart.
Search results for '5v'
-
Adafruit ATWINC1500 WiFi Breakout w/uFL Connector
Connect your Arduino to the Internet with this fine new FCC-certified WiFi module from Atmel Learn More -
Adafruit Audio FX Mini Sound Board - WAV/OGG Trigger - 2MB Flash
Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Learn More -
Adafruit Monochrome 2.3" 128x32 OLED Graphic Display Module Kit
Monochrome graphical OLED-display,128x32 Pixels, 2.3" Learn More -
Adafruit TSL2591 High Dynamic Range Digital Light Sensor
From 0.000118 to 88,000 Lux, you can sense it! Learn More -
Adafruit Monochrome 2.7" 128x64 OLED Graphic Display Module
These displays are 2.7" diagonal, and very readable due to the high contrast of an OLED display. Learn More -
Adafruit NeoPixel Jewel - Cool White - ~6000K
A nice jewel with 7 x 5050 RGBW LED w/ Integrated Drivers - Cool White - ~6000K Learn More -
Adafruit NeoPixel Jewel - Natural White - ~4500K
A nice jewel with 7 x 5050 RGBW LED w/ Integrated Drivers - Natural White - ~4500K Learn More -
Adafruit NeoPixel Jewel - Warm White - ~3000K
A nice jewel with 7 x 5050 RGBW LED w/ Integrated Drivers - Warm White - ~3000K Learn More -
Adafruit NeoPixel FeatherWing - 4x8 RGB LED Add-on
This is the NeoPixel FeatherWing, a 4x8 RGB LED Add-on For All Feather Boards! Learn More -
Adafruit FLORA - Wearable electronic platform - V3
New V2 of the Arduino compatible Wearable electronic platform - now with micro-USB and one Neopixel on Board. Learn More -
Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g)
The LIS3DH is a very popular low power triple-axis accelerometer. Learn More -
Adafruit BME280 I2C/SPI Temperature Humidity Pressure Sensor
This sensor is great for all sorts of weather/environmental sensing and can even be used in both I2C and SPI! Learn More -
Adafruit Micro Lipo - USB LiIon/LiPoly charger - v1
This is the tiniest little lipo charger, so handy you can keep it any project box! Simply plug in the gold plated contacts into any USB port and a 3.7V/4.2V Lipo rechargeable battery into the JST plug on the other end. Learn More -
Adafruit ALS-PT19 Analog Light Sensor Breakout
Due to the high rejection ratio of infrared radiation, the spectral response of the ambient light sensor is close to that of human eyes. Learn More -
Adafruit TCA9548A I2C Multiplexer
Finally, a way to get up to 8 same-address I2C devices hooked up to one microcontroller Learn More -
Adafruit 8-Channel PWM or Servo FeatherWing
A Feather board without ambition is a Feather board without FeatherWings! This is the 8-Channel PWM or Servo FeatherWing, you can add 8 x 12-bit PWM outputs to your FeatherWing. Learn More -
Adafruit VCNL4010 Proximity/Light sensor
The VCNL4010 sensor is a nice way to add a small-distance proximity sensor to your microcontroller project. Learn More -
Adafruit Silicon MEMS Microphone Breakout - SPW2430
Just like 'classic' electret microphones, MEMS mics can detect sound and convert it to voltage, but they don't need a bias resistor or amplifier, its all in one! Learn More -
Adafruit Monochrome 0.96" 128x64 OLED graphic display
These displays are small, only about 1" diameter, but very readable due to the high contrast of an OLED display. This display is made of 128x64 individual white OLED pixels, each one is turned on or off by the controller chip. Learn More -
Adafruit LM3671 3.3V Buck Converter Breakout - 3.3V/600mA
Your power supply problems just got SUPER SOLVED! This 3.3V Buck Converter Breakout board is great for supplying power to low voltage circuits from a single Li-Ion cell battery or USB power. Learn More -
Adafruit Bluefruit LE Shield - Bluetooth LE for Arduino
Would you like to add powerful and easy-to-use Bluetooth Low Energy to your robot, art or other electronics project? Heck yeah! Learn More -
Adafruit Pi-EzConnect Terminal Block Breakout HAT
Terminal Block HAT für alle Pi mit 40Pin GPIO Learn More -
Adafruit MPL115A2 - I2C Barometric Pressure/Temperature Sensor
I2C Druck/Temperatur-Sensor von Freescale Learn More -
Adafruit BMP280 I2C/SPI Barometer & Höhensensor (Stemma Qt)
Bosch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI! Learn More -
Adafruit Micro Lipo w/MicroUSB Jack - USB LiIon/LiPoly charger
Kleiner Charger für LiIon & LiPoly-Akkus 3.7V / 4.2V, mit MicroUSB-Anschluss Learn More -
Adafruit Bluefruit LE SPI Friend - Bluetooth Low Energy (BLE)
The Bluefruit LE SPI Friend makes it easy to add Bluetooth Low Energy connectivity to anything with 4 or 5 GPIO pins. With SPI, you don't have to worry about baud rates, flow control, or giving up a hardware UART port Learn More -
Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
HAT für den Raspberry Pi (alle Modelle) um 4 DC- oder 2 Stepper-Motoren mit vollem PCM-Support zu steuern. Learn More -
Adafruit I2C Non-Volatile FRAM Breakout - 256Kbit / 32KByte
This particular FRAM chip has 256 Kbits (32 KBytes) of storage, interfaces using I2C, and can run at up to 1MHz I2C rates. Learn More -
Adafruit USB Isolator - 100mA Isolated Low/Full Speed USB
This handy little low-cost USB isolator is exactly what you need to provide protection against harmful noise, ground loops, surges, and spikes. Learn More -
Adafruit DRV2605L Haptic Motor Controller
The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for controlling haptic motors - buzzers and vibration motors. Learn More