You have no items in your shopping cart.
Search results for 'el wire'
-
Quick Disconnect - Male 1/4" (bag of 50)
These connectors are really useful as power connectors in prototyping or in projects that are repeatedly assembled and disassembled. Learn More -
EL Tape 10mm / Pink / One Meter
Electroluminescent Tape (EL Tape) / Width 10mm / Pink / one meter Learn More -
EL Tape 10mm / Yellow / One Meter
Electroluminescent Tape (EL Tape) / Width 10mm / Yellow / one meter Learn More -
APA102 (DotStar) LED-Strip 60 LED/Meter, 5 Meters
You can set the color/brightness of each LED to 24-bit color (8 bits each red green and blue). Because the clock and data is seperated, you can use any processor speed or type to control these strips. Reel with 5 Meters Learn More -
APA102 (DotStar) LED-Strip 30 LED/Meter, 5 Meters
You can set the color/brightness of each LED to 24-bit color (8 bits each red green and blue). Because the clock and data is seperated, you can use any processor speed or type to control these strips. 5 meter Reel Learn More -
APA102 (DotStar) LED-Strip 144 LED/Meter, 1 Meter
You can set the color/brightness of each LED to 24-bit color (8 bits each red green and blue). Because the clock and data is seperated, you can use any processor speed or type to control these strips. Learn More -
APA102 (DotStar) LED-Strip 60 LED/Meter, 1 Meter
You can set the color/brightness of each LED to 24-bit color (8 bits each red green and blue). Because the clock and data is seperated, you can use any processor speed or type to control these strips. Learn More -
APA102 (DotStar) LED-Strip 30 LED/Meter, 1 Meter
You can set the color/brightness of each LED to 24-bit color (8 bits each red green and blue). Because the clock and data is seperated, you can use any processor speed or type to control these strips. Learn More -
Adjustable Bent-Wire Stand for 8-10" Tablets and Displays
This handy bent-wire stand was originally designed to hold tablets from 8-10 inches but the rubberized design is great for general purpose electronics & TFT holding. Learn More -
Load Cell - 200kg, Disc (TAS606)
This single disc load cell (sometimes called a strain gauge) can translate up to 50kg of pressure (force) into an electrical signal. Learn More -
Load Cell - 50kg, Disc (TAS606)
This single disc load cell (sometimes called a strain gauge) can translate up to 50kg of pressure (force) into an electrical signal. Learn More -
Load Cell - 10kg, Straight Bar (TAL220)
This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Learn More -
Bluetooth 4.0 Module - BR-LE 4.0-S3A
The BR-LE4.0-S3A is a standalone Class 1 Bluetooth 4.0 module that requires no firmware or external components. Learn More -
1.8" 18-bit color TFT LCD display with microSD - ST7735R
1.8" 18-bit color TFT LCD display with microSD card breakout - ST7735R Learn More -
Black Enclosure for the Raspberry PI (Pi2 / Pi3)
Black Enclosure for the Raspberry PI (Pi2 / Pi3), Simply snap the RPi into the bottom half of the enclosure, then snap the two sides together
Learn More -
DC Barrel Jack Adapter - Male 2.1mm - EIAJ-04
DC Barrel Jack Adapter - 5.5x2.1mm (EIAJ-04), center-positive male barrel jack Learn More -
JST-SM 2 Pin Male to 4 x 2 Pin Female Splitter 40cm
Connect 4 EL Wires to one inverter Learn More -
JST-SM 2 Pin Male to 2 x 2 Pin Female Splitter 40cm
Connect 2 EL Wires to one inverter Learn More -
ADS1115 16-Bit ADC - 4 Channels with Gain Amplifier
For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples/second over I2C. Learn More -
AVR ISP Shield for Arduino
Transform your Arduino into an ArduinoISP Learn More -
JST-SM 2 Pin Male to 2 x 2 Pin Female Splitter 120cm
Connect 2 EL Wires to one inverter Learn More -
JST-SM 2 Pin Male to 5 x 2 Pin Female Splitter 120cm
Connect upto 5 EL Wires to one inverter Learn More -
JST-SM 2 Pin Male to 3 x 2 Pin Female Splitter 120cm
Connect upto 3 EL Wires to one inverter Learn More -
Raspberry Pi2 and Pi3 Enclosure (Clear)
Simply snap the Pi into the bottom half of the enclosure, then snap the two sides together. Learn More -
Raspberry Pi (Pi2 / Pi3) Enclosure (Black)
Simply snap the Raspberry Pi B+ / Pi2 / Pi3 into the bottom half of the enclosure, then snap the two sides together. Learn More -
JST SH Jumper 6 Wire Assembly - 8"
JST SH Jumper 6 Cable for GPS Receiver - GP-635T Learn More -
Set: 2 Cables JST-SM Connectors Male & Female 22AWG 17/0.16TS
Set: 2 Cables JST-SM Connectors Male & Female, Kabelspezifikation: 22AWG 17/0.16TS (UL1007AWM), Tinned copper wire, ROHS
Learn More -
NeoPixel Digital RGB LED Weatherproof Strip 30 LED - 5 meters reel
These LED strips are even more fun and glowy. There are 30 RGB LEDs per meter, and you can control each LED individually! This is a 5 meters reel, which gives you 150 LED in total. Learn More -
WS2812 NeoPixel Digital RGB LED Weatherproof Strip 30 LED 1M
There are 30 RGB LEDs per meter, and you can control each LED individually! Yes, that's right, this is the digitally-addressable type of LED strip. Learn More -
WS2812 NeoPixel Digital RGB LED Weatherproof Strip 60 LED 1M
These LED strips are even more fun and glowy. There are 60 RGB LEDs per meter, and you can control each LED individually! Learn More
