You have no items in your shopping cart.
Search results for 'breadboard'
-
Adafruit TS3USB30 1 to 2 USB Switch
The Adafruit TS3USB30 1 to 2 USB Switch is a nifty breakout board for the TI TS3USB30 that will let you connect one of two USB devices to a single port. Learn More -
10 Stk. Mini Schiebe Schalter / Slide Switch - ON/ON - Griffhöhe 2mm
Simple Slide Switches, only 8.5mm x 3.7mm, 2.54mm Grid, Set of 10 Learn More -
SparkFun Tristimulus Color Sensor - OPT4048DTSR (Qwiic)
The SparkFun Qwiic Tristimulus Color Sensor is built around the OPT4048 High-Speed, High-Precision Tristimulus XYZ Color Sensor from Texas Instruments. Learn More -
SparkFun MicroMod Qwiic Pro Kit
The MicroMod Qwiic Pro Kit provides you with a MicroMod Carrier, a MicroMod Processor, two sensors, a joystick, an OLED Screen, and all the cables you need to start utilizing Qwiic and I2C easily. Learn More -
Adafruit INA228 - I2C 85V, 20-bit High or Low Side Power Monitor - STEMMA QT / Qwiic
The INA228 is an amazing power monitoring chip, with best-of-everything support Learn More -
Adafruit ADS7830 8-Channel 8-Bit ADC with I2C - STEMMA QT / Qwiic
Many microcontrollers have ADCs these days, for reading analog/resistive sensors like potentiometers, thermistors, LDR light sensors, etc. but sometimes you need MOAR! Or maybe you're using a single board computer like a Raspberry Pi that has no ADCs at all! Learn More -
Jumperkabel (40cm) F/F 40 Stk.
Jumperkabel (40cm) F/F(Female/Female) 40 Stk. Material: Tinned copper wire Learn More -
Jumperkabel (40cm) M/M 40 Stk.
Jumperkabel (40cm) M/M 40 Stk. Material: Tinned copper wire Learn More -
Teensy 4.1
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. Learn More -
Adafruit LSM6DSOX + LIS3MDL - Precision 9 DoF IMU - STEMMA QT / Qwiic
Add high-quality motion, direction, and orientation sensing to your Arduino project with this all-in-one 9 Degree of Freedom (9-DoF) sensor with sensors from ST. This little breakout contains two chips that sit side-by-side to provide 9 degrees of full-motion data. Learn More -
Adafruit Sensirion SHT41 Temperature & Humidity Sensor - STEMMA QT / Qwiic
Sensirion Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. The SHT41 sensor is the fourth generation of I2C temperature and humidity sensor from Sensirion. Learn More -
SparkFun Brushless Motor Driver - 3-Phase (TMC6300)
The SparkFun 3-Phase Brushless Motor Driver, featuring the TMC6300 from ADI + Trinamic, is a powerful and easy-to-use three-phase motor driver. Learn More -
Adafruit 1.3" 240x240 Wide Angle TFT LCD Display with MicroSD - ST7789
It's so small only 1.3" diagonal but has a high density 260 ppi, 240x240 pixel display with full-angle viewing. Learn More -
Adafruit MOSFET Driver - For Motors, Solenoids, LEDs, etc - STEMMA JST PH 2mm
This board has a simple plug-and-play JST PH (2mm pitch) input connector for solderless use. Provide power (from 3V up to 30V) and signal (3V to 20V logic level). Learn More -
Adafruit PCA9546 4-Channel STEMMA QT / Qwiic I2C Multiplexer - TCA9546A Compatible
You just found the perfect I2C sensor, available in a handy chainable Qwiic, or STEMMA QT package, Learn More -
SparkFun Indoor Air Quality Sensor - ENS160 (Qwiic)
The SparkFun ENS160 Indoor Air Quality Sensor is a digital multi-gas sensor solution with four sensor elements that can be used in a wide range of applications including building automation, smart home, and HVAC. Learn More -
Adafruit QT 5V to 3V Level Shifter Breakout - STEMMA QT / Qwiic
On one side is 5V-safe power and logic input. In the middle is a 3.3V regulator that can provide 500mA plus level shifting circuitry. Learn More -
Adafruit Si5351A Clock Generator with STEMMA QT - 8KHz to 160MHz
This chip has a precision 25MHz crystal reference and internal PLL and dividers so it can generate just about any frequency, from <8KHz up to 150+ MHz. Learn More -
Adafruit SPI FLASH Breakout - W25Q16 - 16 Mbit / 2 MByte
Sometimes you need a little extra storage for your microcontroller projects: for files, images, fonts, audio clips, etc. Learn More -
Adafruit PiCowbell Proto for Pico - Reset Button & STEMMA QT
Ding dong! Hear that? It's the PiCowbell ringing, letting you know that the new Adafruit PiCowbell Proto is finally in stock and ready to assist your Raspberry Pi Pico and Pico W project with handy hardware and practical prototyping. Learn More -
SparkFun Essential Sensor Kit V2
With everything included in this kit, you'll be able to sense acceleration, force, vibration, Infrared light, ambient light, temperature, and more! Learn More -
Adafruit Triple-axis Magnetometer - MMC5603 - STEMMA QT / Qwiic
Sense the magnetic fields surrounding us with this handy triple-axis magnetometer (compass) module. Magnetometers can sense where the strongest magnetic force is coming from, generally used to detect magnetic north, but can also be used for measuring magnetic fields. Learn More -
Adafruit ESP32 Feather V2 - 8MB Flash + 2 MB PSRAM - STEMMA QT
A complete redesign of the HUZZAH32 ESP32 Feather Learn More -
Adafruit Adafruit Audio FX Sound Board + 2x2W Amp - WAV/OGG Trigger -16MB
The Sound Board has a lot of amazing features that make it the easiest thing ever Learn More -
Adafruit Ultimate GPS Breakout with GLONASS + GPS - PA1616D - 99 channel w/10 Hz updates
This version of the Ultimate GPS is even MORE Ultimate, with support for more GPS-like networks such as GLONASS, for even more coverage worldwide. It uses a slightly taller module than our classic Ultimate GPS, and uses a little more power. Otherwise its almost identical in functionality Learn More -
SparkFun Distance Sensor - 1.3 Meter, VL53L4CD (Qwiic)
This SparkFun Distance Sensor Breakout utilizes the VL53L4CD next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at short ranges for its size. Learn More -
ADXL343 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI - STEMMA QT / Qwiic
The sensor has three axes of measurements, X Y Z, and pins that can be used either as I2C or SPI digital interfacing. You can set the sensitivity level to either +-2g, +-4g, +-8g or +-16g. Learn More -
NeoPixel / WS2812D Diffused 8mm Through-Hole LED - 10 Pack
Each LED looks just like your classic through-hole 8mm RGB LED with 4 legs, but instead of just red/green/blue there's a little chip inside that can control the LED with high speed PWM for 24-bit color. Learn More -
Kitronik Monk Makes Electronics Kit 1 for Pico (lite edition)
The Monk Makes Electronics Kit 1 for Pico (lite edition) is a low cost, simple to use electronic Kit for the Raspberry Pi Pico. The kit has been designed to teach you basic electronics and coding via the Pico platform. Learn More -
Kitronik Discovery Kit for the BBC micro:bit
The Kit contains five experiments that start very simply, building up to simulating real world systems as confidence grows. Learn More