You have no items in your shopping cart.
Search results for 'adafruit'
-
Adafruit H3LIS331 Ultra High Range Triple-Axis Accelerometer - STEMMA QT / Qwiic
It’s not hard to find an accelerometer that can measure accelerations up to 16g, but if you need an accelerometer that can measure even larger amounts of acceleration, your options narrow (The ICM20649 is a great sensor and can measure up to ±30g). Learn More -
Adafruit Adafruit Itsy Bitsy 32u4 - 5V 16MHz
Grösser als ein Trinket, kleiner als ein Feather: Das Itsy Bitsy mit dem Atmega 32u4. Learn More -
Adafruit Micro SD SPI or SDIO Card Breakout Board - 3V ONLY!
Tthis breakout is not fixed for SPI usage, and can be used with SDIO hardware support. Learn More -
Adafruit BH1750 Light Sensor - STEMMA QT / Qwiic
The BH1750 provides 16-bit light measurements in lux, the SI unit for measuring light, making it easy to compare against other values like references and measurements from other sensors. Learn More -
3D-Gedruckte Box für Adafruit Trellis / Single
3D-Gedruckte Box für Adafruit Trellis Learn More -
3D-Gedruckte Box für Adafruit Trellis / Double
3D-Gedruckte Box für Adafruit Trellis (Double) Learn More -
Adafruit AP3429A/TLV62569 3.3V Buck Converter Breakout - 3.3V Output 1.2A Max
This little buck converter based on the AP3429A is super handy, taking up to 5.5V input and providing a 3.3V output with up to 1.2A current. Learn More -
MPM3610 5V Buck Converter Breakout - 21V In 5V Out at 1.2A
This little buck converter based on the MPM3610 is a marvel, taking up to 21V input and providing a 5V output with up to 1.2A current. Learn More -
Adafruit LTC4311 I2C Extender / Active Terminator - STEMMA QT / Qwiic
You can now achieve much faster data rates without having to noodle with resistors, and over long cables. Learn More -
Adafruit LSM6DSO32 6-DoF Accelerometer and Gyroscope - STEMMA QT / Qwiic
This lil IMU is like a big sister to the LSM6DSOX, it has the same pin out and firmware - but the accelerometer component can go up to 32g instead of the normal 16g maximum. Learn More -
Adafruit PyBadge for MakeCode Arcade, CircuitPython or Arduino
What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino? That's right, its the Adafruit PyBadge! Learn More -
Adafruit LTR390 UV Light Sensor - STEMMA QT / Qwiic
The LTR390 is one of the few low-cost UV sensors available, and it's a pretty nice one! With both ambient light and UVA sensing with a peak spectral response between 300 and 350nm. You can use it for measuring how much sun you can get before needing to covering up. Learn More -
Adafruit SMT Breakout PCB for SOIC-20 or TSSOP-20 - 3 Pack!
One side has a 20-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 20-SOIC. Learn More -
Adafruit SMT Breakout PCB for SOIC-8, MSOP-8 or TSSOP-8 - 6 Pack!
One side has a 8-TSSOP/8-MSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 8-SOIC Learn More -
Adafruit SMT Breakout PCB for SOIC-16 or TSSOP-16 - 3 Pack!
One side has a 16-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 16-SOIC. Learn More -
Adafruit SMT Breakout PCB for SOIC-28 or TSSOP-28 - 3 Pack!
One side has a 28-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 28-SOIC. Learn More -
Adafruit BMP388 - Precision Barometric Pressure and Altimeter - STEMMA QT
The BMP3xx is the next-generation of sensors from Bosch and is the upgrade to the BMP280 - with a low altitude noise as low as 0.1m and the same fast conversion time. Learn More -
Adafruit TPS62827 3.3V Buck Converter Breakout - 3.3V Output 2 Amp Max
This little buck converter based on the TPS62827 is super handy, taking up to 5.5V input and providing a 3.3V output with up to 2A current. Learn More -
Adafruit 16x9 Charlieplexed PWM LED Matrix Driver - IS31FL3731
The IS31FL3731 will let you get back to that classic LED matrix look, with a nice upgrade! Learn More -
Adafruit PyBadge LC - MakeCode Arcade, CircuitPython, or Arduino - Low Cost Version
What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino even when you're on a budget? That's right, it's the Adafruit PyBadge LC! Learn More -
Adafruit AW9523 GPIO Expander and LED Driver Breakout
Expand your project possibilities, with the Adafruit AW9523 GPIO Expander and LED Driver Breakout - a cute and powerful I2C expander with a lot of tricks up its sleeve. Learn More -
Adafruit AirLift – ESP32 WiFi Co-Processor Breakout Board
Give your plain ol' microcontroller project a lift with the Adafruit AirLift - a breakout board that lets you use the powerful ESP32 as a WiFi co-processor. Learn More -
Adafruit LPS35HW Water Resistant Pressure Sensor - STEMMA QT
The ST LPS35HW is a water resistant barometric pressure and temperature sensor that is also safe to use in wet environments. The sensing element is nestled safely in a ceramic package and is encased in a waterproof gel that prevents water that gets into the sensor from interfering with readings. Learn More -
Adafruit TMP117 ±0.1°C High Accuracy I2C Temperature Sensor
The TMP117 Precision Temperature Sensor is an I2C temperature sensor that will help you easily add temperature measurement and adjustment to your project. Learn More -
Adafruit NeoKey Trinkey - USB NeoPixel Mechanical Key Switch
It's half USB Key, half Adafruit Trinket, half mechanical keeb...it's NeoKey Trinkey, the circuit board with a Trinket M0 heart, a NeoPixel glow, and a Cherry MX-compatible. Learn More -
Adafruit HTU31 Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic
The HTU31-D is the third generation of temperature-humidity sensors from TE and great for sensing temperature and humidity, with excellent specifications. Learn More -
Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout - STEMMA QT / Qwiic
The MCP9808 digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard I2C. Learn More -
Adafruit ItsyBitsy RP2040
Featuring the Raspberry Pi RP2040! Small, powerful, with a ultra fast dual Cortex M0+ processor running at 125 MHz Learn More -
Adafruit QT Py RP2040
What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite chip, the RP2040. It's been made famous in the new Raspberry Pi Pico and our Feather RP2040 and ItsyBitsy RP2040, but what if we wanted something really smol? Learn More -
Adafruit Feather RP2040
This Feather features the RP2040, and all niceties you know and love about Feather Learn More