You have no items in your shopping cart.
Search results for 'switch'
-
Adafruit ESP32-S3 Feather with STEMMA QT / Qwiic - 8MB Flash No PSRAM
The ESP32-S3 has arrived in Feather format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this Feather is great for powering your IoT projects. Learn More -
Adafruit Adafruit Audio FX Sound Board + 2x2W Amp - WAV/OGG Trigger -16MB
The Sound Board has a lot of amazing features that make it the easiest thing ever Learn More -
Adafruit ESP32 Feather V2 - 8MB Flash + 2 MB PSRAM - STEMMA QT
A complete redesign of the HUZZAH32 ESP32 Feather Learn More -
Adafruit PCF8574 I2C GPIO Expander Breakout - STEMMA QT / Qwiic
Expand your project possibilities, with the Adafruit PCF8574 GPIO Expander Breakout - an affordable 8 channel I2C expander. Learn More -
SparkFun Essential Sensor Kit V2
With everything included in this kit, you'll be able to sense acceleration, force, vibration, Infrared light, ambient light, temperature, and more! Learn More -
Adafruit MOSFET Driver - For Motors, Solenoids, LEDs, etc - STEMMA JST PH 2mm
This board has a simple plug-and-play JST PH (2mm pitch) input connector for solderless use. Provide power (from 3V up to 30V) and signal (3V to 20V logic level). Learn More -
SparkFun Buck Regulator Breakout - 3.3V (AP3429A)
The SparkFun 3.3V Buck Regulator Breakout features the AP3429A from Diodes Inc., a 2A step-down DC-DC converter with an input voltage range of 2.7V to 5.5V. Learn More -
SparkFun Buck Regulator Breakout - 1.8V (AP3429A)
The SparkFun 1.8V Buck Regulator Breakout features the AP3429A from Diodes Inc., a 2A step-down DC-DC converter with an input voltage range of 2.7V to 5.5V. Learn More -
Adafruit QT Py S3 with 2MB PSRAM WiFi Dev Board with STEMMA QT
The ESP32-S3 has arrived in QT Py format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this QT Py is great for powering your IoT projects. Learn More -
Adafruit LM66200 Ideal Dual Diodes Breakout
The Adafruit LM66200 Dual Ideal Diode breakout is a cute solution to dual supplies: it has back-voltage protection, and two 'ideal' diodes with RdsOn of 40 milliohms, support for 2.5A continuous draw and a separate enable input and status output. Learn More -
SparkFun Tristimulus Color Sensor - OPT4048DTSR (Qwiic)
The SparkFun Qwiic Tristimulus Color Sensor is built around the OPT4048 High-Speed, High-Precision Tristimulus XYZ Color Sensor from Texas Instruments. Learn More -
10 Stk. Mini Schiebe Schalter / Slide Switch - ON/ON - Griffhöhe 2mm
Simple Slide Switches, only 8.5mm x 3.7mm, 2.54mm Grid, Set of 10 Learn More -
Adafruit TS3USB30 1 to 2 USB Switch
The Adafruit TS3USB30 1 to 2 USB Switch is a nifty breakout board for the TI TS3USB30 that will let you connect one of two USB devices to a single port. Learn More -
Adafruit 12V Bias Voltage Boost Converter - TPS61040
The Adafruit 12V Bias Voltage Boost Converter uses our new favorite mini-booster, the TI TPS61040, to generate a 12V DC from as little as 3V input. Learn More -
Kitronik MI:power board for the BBC Microbit V2
The MI:power board for the BBC micro:bit brings real portability to your wearable projects. Learn More -
Adafruit QT Py CH32V203 Dev Board with STEMMA QT
The CH32V203G6 has a single 32-bit RISC-V core, running up to 144MHz, with 1-cycle multiply/divide. Inside is 10KB SRAM, 32KB single-cycle Flash as well as an additional 'external XIP' 224KB of Flash that can be used for program or data storage Learn More -
Breadboard-friendly SPDT Slide Switch
These nice switches are perfect for use with breadboard and perfboard projects. Learn More -
N-Channel MOSFET 55V 30A
This is a common MOSFET with very low on-resistance and a control voltage (aka gate voltage) that is compatible with any 3-5V microcontroller. Learn More -
MPI 4.3" HDMI LCD für Raspberry Pi/Windows (HDMI), Kapazitiven Touch, 800x480
4.3" TFT-Screen 800x480 mit HDMI-Interface und Kapazitiven Touch Learn More -
SparkFun MOSFET Power Switch and Buck Regulator (Low-Side)
The MOSFET Power Switch and Buck Regulator (Low-Side) can be powered with up to 12V and control up to 10A, all while providing a sweet 3.3V. Learn More -
Tiltsensor AT407
This AT407 basic tilt switch can easily be used to detect orientation. Learn More