You have no items in your shopping cart.
Tinkerforge GPS Bricklet 2.0
Sends and receives data through CAN bus with configurable baudrate, modes and filters
SKU:
P00001915
Sign up to get notified when this product is back in stock
Availability: Currently out of stock
CHF59.90
.
Product Description
Details
Features
- Supports GPS and GLONASS simultaneously (later Galileo through software update)
- Receives movement-, position-, altitude, time data and PPS signal
- Elevation, azimuth and SNR for each GPS/GLONASS satellite accessible
- 99 channels, 10Hz update rate
- High sensitivity and accuracy, interference canceller
Details
The GPS Bricklet 2.0 can be used to extend Bricks by the possibility to determine their position via GPS. Additionally it is possible to receive movement (direction and velocity), altitude (altitude and geodial separation), as well as high precise time/date information and PPS signal.
Current values for elevation, azimuth and SNR for each of the GPS and GLONASS satellites can be read out.
The GPS module is optimized to get a fast fix, has a high input sensitivity (-165dBm) and a update rate of 10Hz suitable for drones or the like. Internal interference canceller rejects RF interference from other devices like Bluetooth or Wi-Fi.
A 25mmx25mm active patch antenna with high gain is permanently attached to the bottom side of the Bricklet and connected by a U.FL connector. You can remove the connector and connect your own external antenna.
A CR1025 coin cell battery is also included. It is used as a battery backup for the last satellite position data. With this information a fix can be obtained faster if the power was lost.
The GPS Bricklet 2.0 has a 7 pole Bricklet connector and is connected to a Brick with a 7p-10p Bricklet cable.
Technical Specifications
| Property | Value |
|---|---|
| GPS Module Chipset | GlobalTop Firefly X1 |
| Sensitivity | -148dBm (Acquisition), -165dBm (Tracking)* |
| Position Accuracy | 3.0m (50% CEP)* |
| Time to first Fix | < 35s (without battery), < 1s (with battery)* |
| Update Rate | 10Hz |
| Dimensions (W x D x H) | 40 x 35 x 12mm (1.57 x 1.38 x 0.47”) |
| Weight | 20g (with battery and antenna) |
| Current Consumption | 73mA |
Comes Packaged With
- GPS Bricklet V2.0
- CR1025 Coin Cell
Links
- Complete documentation and information about TinkerForge: http://www.tinkerforge.com/en/doc/index.html
Additional Information
Additional Information
| SKU | P00001915 |
|---|---|
| Weight | 0.0100 |
| Manufacturer | Tinkerforge |
Reviews
Questions or Suggestions?
Do you have a question about a product? Do you have a suggestion for the description or even found an error? Contact us!