Sie haben keine Artikel im Warenkorb.
Suchergebnisse für 'ide 40 pin'
-
Adafruit eInk Breakout Friend mit 32KB SRAM
Bring etwas Bi-Stabilität in dein Leben mit dem Adafruit EInk Breakout Friend – dein lustiger Kumpel, der dir gerne zur Seite steht, wenn du mit EInk-/E-Paper-Displays arbeiten willst. Erfahren Sie mehr -
Adafruit I2C to 8 Channel Solenoid Driver - STEMMA QT / Qwiic
Adafruit hat den I2C-auf-8-Kanal-Magnettreiber entwickelt, der einen MCP23017 GPIO-Expander verwendet, um das gleichzeitige Ansteuern von bis zu acht Magnetventilen einfach und lötfrei zu gestalten. Erfahren Sie mehr -
Adafruit INA237 85V 10A 16-bit DC Current Voltage Power Monitor - STEMMA QT
Der INA237 ist ein beeindruckender Chip zur Leistungsüberwachung, mit einem «Best-of»-Paket Erfahren Sie mehr -
Adafruit QT Py CH32V203 Dev Board with STEMMA QT
The CH32V203G6 has a single 32-bit RISC-V core, running up to 144MHz, with 1-cycle multiply/divide. Inside is 10KB SRAM, 32KB single-cycle Flash as well as an additional 'external XIP' 224KB of Flash that can be used for program or data storage Erfahren Sie mehr -
Adafruit LM66200 Ideal Dual Diodes Breakout
The Adafruit LM66200 Dual Ideal Diode breakout is a cute solution to dual supplies: it has back-voltage protection, and two 'ideal' diodes with RdsOn of 40 milliohms, support for 2.5A continuous draw and a separate enable input and status output. Erfahren Sie mehr -
Adafruit ADS7830 8-Channel 8-Bit ADC with I2C - STEMMA QT / Qwiic
Many microcontrollers have ADCs these days, for reading analog/resistive sensors like potentiometers, thermistors, LDR light sensors, etc. but sometimes you need MOAR! Or maybe you're using a single board computer like a Raspberry Pi that has no ADCs at all! Erfahren Sie mehr -
Adafruit Audio BFF Add-on for QT Py and Xiao
Our QT Py boards are a great way to make very small microcontroller projects that pack a ton of power - and now we have a way for you to turn many QT Py boards into powerful audio play projects that are super small! Erfahren Sie mehr -
Adafruit LSM6DSOX + LIS3MDL - Precision 9 DoF IMU - STEMMA QT / Qwiic
Add high-quality motion, direction, and orientation sensing to your Arduino project with this all-in-one 9 Degree of Freedom (9-DoF) sensor with sensors from ST. This little breakout contains two chips that sit side-by-side to provide 9 degrees of full-motion data. Erfahren Sie mehr -
Adafruit QT Py S3 with 2MB PSRAM WiFi Dev Board with STEMMA QT
The ESP32-S3 has arrived in QT Py format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this QT Py is great for powering your IoT projects. Erfahren Sie mehr -
Adafruit 1.3" 240x240 Wide Angle TFT LCD Display with MicroSD - ST7789
It's so small only 1.3" diagonal but has a high density 260 ppi, 240x240 pixel display with full-angle viewing. Erfahren Sie mehr -
Adafruit MOSFET Driver - For Motors, Solenoids, LEDs, etc - STEMMA JST PH 2mm
This board has a simple plug-and-play JST PH (2mm pitch) input connector for solderless use. Provide power (from 3V up to 30V) and signal (3V to 20V logic level). Erfahren Sie mehr -
Adafruit Triple-axis Magnetometer - MMC5603 - STEMMA QT / Qwiic
Sense the magnetic fields surrounding us with this handy triple-axis magnetometer (compass) module. Magnetometers can sense where the strongest magnetic force is coming from, generally used to detect magnetic north, but can also be used for measuring magnetic fields. Erfahren Sie mehr -
Adafruit ESP32 Feather V2 - 8MB Flash + 2 MB PSRAM - STEMMA QT
A complete redesign of the HUZZAH32 ESP32 Feather Erfahren Sie mehr -
Adafruit VL53L4CX Time of Flight Distance Sensor - ~1 to 6000mm - STEMMA QT / Qwiic
The Adafruit VL53L4CX Time of Flight Sensor is another great Time of Flight distance sensor from ST in the VL5 series of chips, this one is great for long distances - it goes up to 6 meters compared with 4 meter max of the VL53L1X. Erfahren Sie mehr -
Adafruit ESP32-S3 Feather with STEMMA QT / Qwiic - 8MB Flash No PSRAM
The ESP32-S3 has arrived in Feather format - and what a great way to get started with this powerful new chip from Espressif! With dual 240 MHz cores, WiFi and BLE support, and native USB, this Feather is great for powering your IoT projects. Erfahren Sie mehr -
Adafruit Ultimate GPS Breakout with GLONASS + GPS - PA1616D - 99 channel w/10 Hz updates
This version of the Ultimate GPS is even MORE Ultimate, with support for more GPS-like networks such as GLONASS, for even more coverage worldwide. It uses a slightly taller module than our classic Ultimate GPS, and uses a little more power. Otherwise its almost identical in functionality Erfahren Sie mehr -
ADXL343 - Triple-Axis Accelerometer (+-2g/4g/8g/16g) w/ I2C/SPI - STEMMA QT / Qwiic
The sensor has three axes of measurements, X Y Z, and pins that can be used either as I2C or SPI digital interfacing. You can set the sensitivity level to either +-2g, +-4g, +-8g or +-16g. Erfahren Sie mehr -
Adafruit ESP32-S2 Feather with BME280 Sensor - STEMMA QT - 4MB Flash + 2 MB PSRAM
The new Adafruit ESP32-S2 Feather with BME280 temperature/humidity/pressure sensor built right in! Erfahren Sie mehr -
Adafruit Feather RP2040
This Feather features the RP2040, and all niceties you know and love about Feather Erfahren Sie mehr -
Adafruit QT Py RP2040
What a cutie pie! Or is it... a QT Py? This diminutive dev board comes with one of our new favorite chip, the RP2040. It's been made famous in the new Raspberry Pi Pico and our Feather RP2040 and ItsyBitsy RP2040, but what if we wanted something really smol? Erfahren Sie mehr -
Adafruit ItsyBitsy RP2040
Featuring the Raspberry Pi RP2040! Small, powerful, with a ultra fast dual Cortex M0+ processor running at 125 MHz Erfahren Sie mehr -
Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout - STEMMA QT / Qwiic
The MCP9808 digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard I2C. Erfahren Sie mehr -
Adafruit HTU31 Temperature & Humidity Sensor Breakout Board - STEMMA QT / Qwiic
The HTU31-D is the third generation of temperature-humidity sensors from TE and great for sensing temperature and humidity, with excellent specifications. Erfahren Sie mehr -
Adafruit TMP117 ±0.1°C High Accuracy I2C Temperature Sensor
The TMP117 Precision Temperature Sensor is an I2C temperature sensor that will help you easily add temperature measurement and adjustment to your project. Erfahren Sie mehr -
Adafruit AW9523 GPIO Expander and LED Driver Breakout
Expand your project possibilities, with the Adafruit AW9523 GPIO Expander and LED Driver Breakout - a cute and powerful I2C expander with a lot of tricks up its sleeve. Erfahren Sie mehr -
Adafruit H3LIS331 Ultra High Range Triple-Axis Accelerometer - STEMMA QT / Qwiic
It’s not hard to find an accelerometer that can measure accelerations up to 16g, but if you need an accelerometer that can measure even larger amounts of acceleration, your options narrow (The ICM20649 is a great sensor and can measure up to ±30g). Erfahren Sie mehr -
Adafruit CCS811 Air Quality Sensor Breakout - VOC and eCO2
Breathe easy - we finally have an I2C VOC/eCO2 sensor in the Adafruit shop! Add air quality monitoring to your project and with an Adafruit CCS811 Air Quality Sensor Breakout. Erfahren Sie mehr -
Adafruit USB C Breakout Board - Downstream Connection
Breakout mit einem USB C-Anschluss inkl. Downstream Connection Erfahren Sie mehr -
Adafruit NeoPXL8 FeatherWing for Feather M0 - 8 x DMA NeoPixels!
8 Stränge mit bis zu 250 LED = Total 2000 Pixel einfach an einen M0-Feather anschliessen! Erfahren Sie mehr -
Adafruit HUZZAH32 – ESP32 Feather Board
Feather-Board mit dem WROOM32 / ESP32 (240Mhz, WiFi und vielen IO-Pins) Erfahren Sie mehr