You have no items in your shopping cart.
Search results for 'el wire'
-
JST-SM Connector with Cable / 3Pin / Female 20CM
Connector with Cable JST-SM / 3Pin / Female 20CM, Tinned copper wire， 22AWG 17/0.14mm OD: 1.6MM ROHS
Learn More -
NeoPixel Digital RGB LED Strip 144 LED 1M Black PCB - WS2812
We crammed ALL THE NEOPIXELS into this strip! An unbelievable 144 individually-controllable LED pixels on a flexible, black PCB. Learn More -
Arduino Yun Enclosure - Black Plastic
These cases protect your Arduino Yun from things like rogue wires that might short it out while still allowing full access to the board! Learn More -
Adafruit Pi T-Cobbler Plus Kit - for Pi B+ - Assembled
The T-Cobbler Plus is an add on prototyping board from Adafruit specifically designed for the B+ that can break out all those tasty power, GPIO, I2C and SPI pins from the 40-pin header. Learn More -
Adafruit Quad Alphanumeric Display - Yellow-Green, I2C
This is a nice, bright alphanumeric display that shows letters and numbers in a beautiful yellow-green hue. Learn More -
Adafruit Quad Alphanumeric Display - Yellow , I2C
This is a nice, bright alphanumeric display that shows letters and numbers in a beautiful yellow hue. Learn More -
Adafruit Quad Alphanumeric Display - Pure Green, I2C
This is a nice, bright alphanumeric display that shows letters and numbers in a beautiful green hue. Learn More -
JST-SM 2 Pin Male to 2 x 2 Pin Female Splitter 120cm
Connect 2 EL Wires to one inverter Learn More -
JST-SM 2 Pin Male to 5 x 2 Pin Female Splitter 120cm
Connect upto 5 EL Wires to one inverter Learn More -
Adafruit Pro Trinket LiIon/LiPoly Backpack Add-On
This little PCB sits on top of the Pro Trinket and allows a LiPoly/LiIon battery to plug in. When the Pro Trinket USB port is powered, the battery is recharged automatically. Learn More -
JST-SM 2 Pin Male to 3 x 2 Pin Female Splitter 120cm
Connect upto 3 EL Wires to one inverter Learn More -
10 Stk. Jumperkabel F/F - 10CM - 24AWG
Set besteht aus: 10 Stk. Jumperkabel，F/F (Female/Female)，Länge: 10cm, Tinned copper wire， 24AWG 11/0.16mm OD: 1.4MM ROH
Learn More -
10 Stk. Jumperkabel M/F - 10CM - 24AWG
Set besteht aus: 10 Stk. Jumperkabel，M/F(Male/Female) ，Länge: 10cm ，Tinned copper wire， 24AWG 11/0.16mm OD: 1.4MM ROHS
Learn More -
Jumperkabel 10 Stk. M/F - 10CM - 22AWG
Set besteht aus: 10 Stk. Jumperkabel，M/F(Male/Female) ，Länge: 10cm ，Tinned copper wire， 22AWG 17/0.14mm OD: 1.6MM ROHS
Learn More -
Jumperkabel 10 Stk. F/F - 10CM - 22AWG
Set besteht aus: 10 Stk. Jumperkabel，F/F (Female/Female)，Länge: 10cm ，Tinned copper wire， 22AWG 17/0.14mm OD: 1.6MM ROHS
Learn More -
Adafruit 1.44" Color TFT LCD Display w/MicroSD
The 1.44" display has 128x128 color pixels. This display is a true TFT! Learn More -
Adafruit Adafruit 12-Key Capacitive Touch Sensor
12-channel capacitive touch sensor breakout board, starring the MPR121. This chip can handle up to 12 individual touch pads. Learn More -
LilyPad FTDI Basic Breakout - 5V
This is a basic breakout board for the FTDI FT232RL USB to serial IC. Learn More -
Adafruit PowerBoost 1000 Basic - 5V USB Boost @ 1000mA from 1.8V+
PowerBoost is the perfect power supply for your power-hungry portable project! This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that voltage to 5.2V DC for running your 5V projects. Learn More -
Tinkerforge Starter Kit: Internet of Things
The Starter Kit: Internet of Things offers an easy access into the world of the Internet of Things. It allows to control many devices over the internet. Learn More -
Raspberry Pi2 and Pi3 Enclosure (Clear)
Simply snap the Pi into the bottom half of the enclosure, then snap the two sides together. Learn More -
Adafruit 3.5" TFT 320x480 + Touchscreen w/MicroSD
This TFT display is big (3.5" diagonal) bright (6 white-LED backlight) and colorful! Learn More -
GY 10-DOF IMU Breakout - L3GD20 + LSM303 + BMP180
This inertial-measurement-unit combines 3 of the best quality sensors available on the market to give you 11 axes of data: 3 axes of accelerometer data, 3 axes gyroscopic, 3 axes magnetic (compass), barometric pressure/altitude and temperature. Learn More -
Raspberry Pi (Pi2 / Pi3) Enclosure (Black)
Simply snap the Raspberry Pi B+ / Pi2 / Pi3 into the bottom half of the enclosure, then snap the two sides together. Learn More -
Heat-Shrink Tubing Assortment 4 sizes, lengh 50cm
Heat-Shrink Tubing Assortment, 50cm each 1.5mm, 2.5mm, 3mm, 5mm Learn More -
Adafruit Quad Alphanumeric Display - Blue, I2C
This is a nice, bright alphanumeric display that shows letters and numbers in a beautiful blue hue. Learn More -
Adafruit Quad Alphanumeric Display - Red, I2C
This is a nice, bright alphanumeric display that shows letters and numbers in a beautiful red hue. Learn More -
Atmel ATMEGA328P-AU - TQFP
ATMega 328 TQFP-Package. Without Arduino Bootloader! Learn More -
Set with inverter and 3 meters EL Wire - white
Set with 3 meters of EL Wire plus inverter - just plug together, no soldering required. Learn More -
JST SH Jumper 6 Wire Assembly - 8"
JST SH Jumper 6 Cable for GPS Receiver - GP-635T Learn More
