You have no items in your shopping cart.
Search results for 'switch'
-
Benchtop Power Board with ATX-Connector
This board will let you take advantage of your power supply to create a benchtop power supply with enough juice to run almost any of your embedded electronics projects. Learn More -
SparkFun Power Driver Shield Kit
This shield allows you to use a computer power supply (or other power source) to use your Arduino to switch high current. With RFP30N06LE MOSFETS, you can easily control a lot of current directly from your Arduino. Learn More -
LilyPad Simple Board
This is the LilyPad Arduino Simple Board. It’s controlled by an ATmega328 with the Arduino bootloader. Learn More -
Tinkerforge LCD 20x4 Bricklet 1.2
20x4 character alphanumeric display with switchable blue backlight and 4 push-buttons Learn More -
Power Cell - LiPo Charger/Booster Combo Board
The PowerCell board is a single cell LiPo boost converter (to 3.3V and 5V) and micro-USB charger in one. Learn More -
Power-Switch with mit DC-Plugs
Simply plug between Power-Supply and the Device - and you're ready to switch the power easily! Learn More -
SparkFun Benchtop Power Board Kit
The benchtop power board kit was created to provide quick access to the typical voltages needed when developing physical computing projects (embedded systems). Learn More -
Adafruit FT232H Breakout - USB-C/Stemma to GPIO+SPI+I2C
The FT232H breakout is like adding a little swiss army knife for serial protocols to your computer! Learn More -
Adafruit Audio FX Sound Board + 2x2W Amp - WAV/OGG Trigger - 2MB
Would you like to add audio/sound effects to your next project, without an Arduino+Shield? Learn More -
SparkFun WAV Trigger
The WAV Trigger is a high-fidelity polyphonic audio player that allows you to do more than just add music and sound effects to your project. Learn More -
Adafruit VERTER 5V USB Buck-Boost - upto 1000ma
Convert just about any battery pack to 5V with VERTER Learn More -
Adafruit Pro Trinket LiIon/LiPoly Backpack Add-On
This little PCB sits on top of the Pro Trinket and allows a LiPoly/LiIon battery to plug in. When the Pro Trinket USB port is powered, the battery is recharged automatically. Learn More -
LilyPad FTDI Basic Breakout - 5V
This is a basic breakout board for the FTDI FT232RL USB to serial IC. Learn More -
Solid State Relay Heatsink
This heatsink can be used to cool solid state relays if large loads are switched. Learn More -
Adafruit PowerBoost 1000 Basic - 5V USB Boost @ 1000mA from 1.8V+
PowerBoost is the perfect power supply for your power-hungry portable project! This little DC/DC boost converter module can run from 1.8V batteries or higher, and convert that voltage to 5.2V DC for running your 5V projects. Learn More -
Tinkerforge Starter Kit: Internet of Things
The Starter Kit: Internet of Things offers an easy access into the world of the Internet of Things. It allows to control many devices over the internet. Learn More -
Adafruit Pro Trinket - 3V 12MHz
Der grosse Bruder des Adafruit Trinket, jetzt mit einem Atmel 328 wie beim Arduino Learn More -
Adafruit Pro Trinket - 5V 16MHz
Der grosse Bruder des Adafruit Trinket, jetzt mit einem Atmel 328 wie beim Arduino Learn More -
LilyPad Slide Switch
Slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. Learn More -
DIP-Schalter mit 1 Position / Rot
DIP-Switch ON/OFF für Printmontage mit 1 Position Farbe: Rot Learn More -
DIP-Schalter mit 1 Position / Blau
DIP-Switch ON/OFF für Printmontage mit 1 Position Farbe: Blau Learn More -
DIP-Schalter mit 2 Positionen / Blau
DIP-Switch ON/OFF für Printmontage mit 2 Positionen Farbe: Blau Learn More -
DIP-Schalter mit 2 Positionen / Rot
DIP-Switch ON/OFF für Printmontage mit 2 Positionen Farbe: Rot Learn More -
Adafruit GEMMA V2 - Miniature wearable electronic platform
Love FLORA but want a bite-sized version? Look no further, GEMMA is a tiny wearable platform board with a lot of might in a 1" diameter package. Powered by a Attiny85 and programmable with an Arduino IDE over USB, you'll be able to realize any wearable project! Learn More -
Solenoid / Hubmagnet 5V
his smaller solenoid is designed to work directly with 5V which makes it a great match for embedded projects. Learn More -
SparkFun Binary Blaster Kit
Binary Blaster is a game designed to help teach what binary numbers are and how to convert from decimal (and hexadecimal) to binary quickly. Learn More -
Set with inverter and 3 meters EL Wire - white
Set with 3 meters of EL Wire plus inverter - just plug together, no soldering required. Learn More -
Actobotics Mini Microswitch Mount - C (pair)
These acrylic mounts are used to attach a miniature microswitches to a slotted surface. Learn More -
Actobotics Mini Microswitch Mount - B (pair)
These acrylic mounts are used to attach a miniature microswitches to a slotted surface. Learn More -
Actobotics Mini Microswitch Mount - A (pair)
These acrylic mounts are used to attach a miniature microswitches to a slotted surface. Learn More
