Search results for 'pin'
-
32 x 16 LED-Matrix / UART / 44mm x 44mm / Blau
32x16 LED, ansteuerbar via UART (Seriell), 84mm x 44mm Learn More -
16x16 LED-Matrix / UART / 44mm x 44mm / Blau
16x16 LED, ansteuerbar via UART (Seriell), 44mm x 44mm Learn More -
SparkFun I2S Audio Breakout - MAX98357A
The SparkFun I2S Audio Breakout board uses the MAX98357A digital to analog converter (DAC), which converts I2S audio to an analog signal to drive speakers. Learn More -
Adafruit ItsyBitsy M4 Express featuring ATSAMD51
Small, powerful, with a ultra fast ATSAMD51 Cortex M4 processor running at 120 MHz. Learn More -
Adafruit Feather M4 Express - ATSAMD51 Cortex M4
This feather is powered by our new favorite chip, the ATSAMD51J19 - with its 120MHz Cortex M4 with floating point support and 512KB Flash and 192KB RAM. Learn More -
Bauteile Starter Set Basic für FPGA oder Arduino Projekte - 93 Teile
Starter-Kit für Dein Elektronik-Projekt mit den wichtigsten Bauteilen - 93Teile Learn More -
HiSpeed USB Kabel 2.0 A -> Micro 5-Pin 50CM/Blau
HiSpeed USB Kabel 2.0 A -> Micro 5-Pin 50cm / Farbe: Blau Transparent, ROHS
Learn More -
HiSpeed USB Kabel 2.0 A -> Micro 5-Pin 30CM/Blau
HiSpeed USB Kabel 2.0 A -> Micro 5-Pin 30cm / Farbe: Blau Transparent, ROHS
Learn More -
E-Design Logic Analyzer LA104
Mobiler Logic Analyzer mit Display, 4 Kanal, 100Mhz Learn More -
OLED Modul 0.96",128 x 64 Pixel, I2C, Gelb und Blau - mit Box
Klein aber Oho: Dieses OLED-Modul mit einer Auflösung von 128 x 64 Pixel ist nur gerade 27.3mm x 27.8mm gross! Learn More -
OLED Modul 0.96",128 x 64 Pixel, I2C, Blau - mit Box
Klein aber Oho: Dieses OLED-Modul mit einer Auflösung von 128 x 64 Pixel ist nur gerade 27.3mm x 27.8mm gross! Learn More -
AI Tinker NodeMCU ESP-32S V.1 (ESP32-DevKitC)
Entwicklerborad von AI Tinker mit dem ESP32 - entspricht dem ESP32-DevKitC von Espressif Learn More -
Acryl-Montageplatte mit Fullsize-Breadboard für Raspberry Pi3 B und B+
Acryl-Montageplatte mit Fullsize-Breadboard für Raspberry Pi3 B und B+ Learn More -
Acryl-Montageplatte für Raspberry Pi3 B und B+
Acryl-Montageplatte für Raspberry Pi3 B und B+ für Fullsize-Breadboard Learn More -
4tronix Bit:2:Pi
Bit:2:Pi allows the micro:bit to connect to Raspberry Pi add-on boards. Learn More -
GPIO Extender Kabel for Raspberry PI F/F (40 Pin) 20cm - Color-coded
2 x 20 Pin Cable Female - Female, Length 20cm - Color-Coded Learn More -
SparkFun RedBoard Edge
The SparkFun RedBoard Edge is a nifty little rework of the SparkFun RedBoard designed to be panel mounted in your custom project enclosure to allow for an easy way to make a clean, finished looking product. Learn More -
Keyes A4988 Stepper Driver Modul mit Breakout
Breakout-Board mit einem A4988 Treiber-PCB Learn More -
Keyes Nano V3.0
The Keyes Nano is a small, complete, and breadboard-friendly board based on the ATmega328 - latest Version 3.0! Fully compatible with the Arduino Nano. Learn More.Regular Price: CHF34.90
Special Price CHF29.90
Currently out of stock
-
Adafruit NeoPXL8 FeatherWing for Feather M0 - 8 x DMA NeoPixels!
Handles all the NeoPixeling for you, up to 8 strands of concurrent DMA output each one can be 250 pixels long for a total of 8 x 250 = 2000 pixels Learn More -
NeoPixel Digital RGB LED Weatherproof Strip 30 LED - strip of 1 meter
The new WS2813 (Neopixel) - now with backup data line! Strip of 1 meter with 30 individually controllable RGB-LED Learn More -
NeoPixel Digital RGB LED Weatherproof Strip 60 LED - strip of 1 meter
The new WS2813 (Neopixel) - now with backup data line! Strip of 1 meter with 60 individually controllable RGB-LED Learn More -
NeoPixel Digital RGB LED Weatherproof Strip 30 LED - 5 meters reel
The new WS2813 (Neopixel) - now with backup data line! Reel of 5 meters with 30 individually controllable RGB-LED per meter = 150 LED Learn More -
WS2813 Digital RGB LED Weatherproof Strip 60 LED - 4 meters reel
The new WS2813 (Neopixel) - now with backup data line! Reel of 4 meters with 60 individually controllable RGB-LED per meter = 240 LED Learn More -
Bauteile Starter Set Basic für FPGA oder Arduino Projekte - 194 Teile
Starter-Kit für Dein Elektronik-Projekt mit den wichtigsten Bauteilen - 194 Teile, Widerstände Material: Kupfer, ROHS Learn More -
Adafruit AS7262 6-Channel Visible Light / Color Sensor Breakout
This sensor from AMS has 6 integrated visible light sensing channels for red, orange, yellow, green, blue, and violet. Learn More -
BBC micro:bit Expansion Board
Prototyping-Erweiterung für das BBC micro:bit Learn More -
Advanced Components Starter-Kit for Arduino/AVR projects with box - 195 parts
Components Starter-Kit for your next Electronics-Project - including a handy box to keep the parts save - 195 Parts! Learn More -
RGB LED Panel - 32x32
Yes, you read that right: a 32x32 LED matrix, that’s 1024 LEDs on a 7.5" x 7.5" board. Learn More -
Joypad-PCB mit 5 Buttons, Ansteuerung über Analog-Pins
Joypad-PCB mit 5 Buttons, Ansteuerung über Analog-Pins Learn More
