Suchergebnisse für 'analog'
-
Adafruit Trinket M0 - für CircuitPython & Arduino IDE
The Adafruit Trinket M0 may be small, but do not be fooled by its size! It's a tiny microcontroller board, built around the Atmel ATSAMD21, a little chip with a lot of power. Erfahren Sie mehr -
Arduino MKR1000
IoT-Board mit dem ATSAMW25 CPU mit integriertem WiFi, 48Mhz, 256kb Flash Speicher und 32kb SRAM Erfahren Sie mehr -
Original Arduino MKR Zero (I2S bus & SD for sound, music & digital audio data)
MKR ZERO has an on-board SD connector with dedicated SPI interfaces (SPI1) that allows you to play with MUSIC files with no extra hardware! Erfahren Sie mehr -
What's Next Yellow (Uno)
Arduino UNO-Kompatibles Mikroprozessor-Board, basierend auf dem ATMega328. Erfahren Sie mehrRegulärer Preis: CHF 19.90
Special Price CHF 17.90
-
What's Next Green (Mega)
Arduino Mega-Kompatibles Mikroprozessor-Board, basierend auf dem ATMega2560 Erfahren Sie mehrRegulärer Preis: CHF 33.90
Special Price CHF 29.90
-
What's Next Pink (Micro)
Arduino Micro-Kompatibles Mikroprozessor-Board, basierend auf dem ATMega32u4 Erfahren Sie mehr -
SparkFun Sound Detector with Headers
The Sound Detector is a small and very easy to use audio sensing board with three different outputs - with presoldered Headers Erfahren Sie mehr -
PS2 Daumen-Joystick mit Select Button + Breakout Board
Arduino PS2 Daumen-Joystick mit Select Button + Breakout Board
Erfahren Sie mehr -
Adafruit PDM MEMS Microphone Breakout
An exotic new microphone has arrived in the PLAY-ZONE-shop, a PDM MEMS Microphone! PDM is the 'third' kind of microphone you can integrate with electronics, apart from analog or I2S. Erfahren Sie mehr -
Adafruit SGP30 Air Quality Sensor Breakout - VOC and eCO2
A fully integrated MOX gas sensor. This is a very fine air quality sensor from the sensor experts at Sensirion, with I2C interfacing and fully calibrated output signals with a typical accuracy of 15% within measured values. Erfahren Sie mehr -
Adafruit Feather 328P - Atmega328P 3.3V @ 8 MHz
With this Feather we're getting a little nostalgic for the ATmega328P - the classic 'Arduino' chip - with this Adafruit Feather 328P running a 3.3V and 8 MHz. Erfahren Sie mehr -
Adafruit Adafruit Itsy Bitsy 32u4 - 3V 8MHz
Grösser als ein Trinket, kleiner als ein Feather: Das Itsy Bitsy mit dem Atmega 32u4. Erfahren Sie mehr -
Original Arduino MKR WAN 1300
MKR WAN 1300 is a powerful board that combines the functionality of the MKR Zero and LoRa connectivity. It is the ideal solution for makers wanting to design IoT projects with minimal previous experience in networking having a low power device. Erfahren Sie mehr -
Joypad-PCB mit 5 Buttons, Ansteuerung über Analog-Pins
Joypad-PCB mit 5 Buttons, Ansteuerung über Analog-Pins Erfahren Sie mehr -
Keyes Nano V3.0
The Keyes Nano is a small, complete, and breadboard-friendly board based on the ATmega328 - latest Version 3.0! Fully compatible with the Arduino Nano. Erfahren Sie mehrRegulärer Preis: CHF 34.90
Special Price CHF 29.90
Zur Zeit Ausverkauft
-
SparkFun RedBoard Edge
Das SparkFun RedBoard Edge ist eine raffinierte Überarbeitung des SparkFun RedBoard, die für den Einbau in Ihr individuelles Projektgehäuse entwickelt wurde. Erfahren Sie mehr -
Adafruit Feather M4 Express - ATSAMD51 Cortex M4
Dieser Feather wird von unserem neuen Lieblingschip, dem ATSAMD51J19, mit seinem 120MHz Cortex M4 mit Gleitkommaunterstützung und 512KB Flash und 192KB RAM angetrieben. Erfahren Sie mehr -
Adafruit ItsyBitsy M4 Express featuring ATSAMD51
Klein, leistungsstark, mit einem ultraschnellen ATSAMD51 Cortex M4 Prozessor mit 120 MHz. Erfahren Sie mehr -
SparkFun I2S Audio Breakout - MAX98357A
Das SparkFun I2S Audio Breakout Board verwendet den Digital-Analog-Wandler (DAC) MAX98357A, der I2S-Audio in ein analoges Signal umwandelt. Erfahren Sie mehr -
Set aus 8 Lochraster-Steckplatinen / Breadboards-170
Set aus 8 Lochraster-Steckplatinen / Breadboard-170 (Grün, Hellgrün, Blau, Schwarz, Weiss, Rot, Gelb, Transparent) Erfahren Sie mehr -
Lochraster-Steckplatine / Breadboard-170 / Grün
Abmessungen: 45mm x 33mm x 9mm / Kontakte: 170 / Kontaktabstand: 2.54 mm / Kabelanschluss - Größe: 0.3 - 0.8 mm (AWG 20 - 28)
Erfahren Sie mehr -
Lochraster-Steckplatine / Breadboard-170 / Hellgrün
Abmessungen: 45mm x 33mm x 9mm / Kontakte: 170 / Kontaktabstand: 2.54 mm / Kabelanschluss - Größe: 0.3 - 0.8 mm (AWG 20 - 28)
Erfahren Sie mehr -
Lochraster-Steckplatine / Breadboard-170 / Gelb
Abmessungen: 45mm x 33mm x 9mm / Kontakte: 170 / Kontaktabstand: 2.54 mm / Kabelanschluss - Größe: 0.3 - 0.8 mm (AWG 20 - 28)
Erfahren Sie mehr -
Lochraster-Steckplatine / Breadboard-170 / Rot
Abmessungen: 45mm x 33mm x 9mm / Kontakte: 170 / Kontaktabstand: 2.54 mm / Kabelanschluss - Größe: 0.3 - 0.8 mm (AWG 20 - 28)
Erfahren Sie mehr -
Lochraster-Steckplatine / Breadboard-170 / Schwarz
Abmessungen: 45mm x 33mm x 9mm / Kontakte: 170 / Kontaktabstand: 2.54 mm / Kabelanschluss - Größe: 0.3 - 0.8 mm (AWG 20 - 28)
Erfahren Sie mehr -
Original Arduino Mega2560 Rev3 Set mit Box
Original Arduino Mega2560 Rev3 Set mit Box
Erfahren Sie mehr -
Adafruit Feather M0 WiFi with uFL - ATSAMD21 + ATWINC1500
Ein schneller Cortex M0+ Prozessor und schnelles, zuverlässiges WiFi mit eingebautem USB und Akkuladung Erfahren Sie mehr -
Original Arduino UNO WIFI Rev. 2
Arduino UNO Board mit dem ATMEGA4809 sowie Wifi Erfahren Sie mehr -
Original Arduino MKR Vidor 4000 mit FPGA
Der Vidor 4000 vereint FPGA und Mikroprozessor auf einem Board Erfahren Sie mehr -
Original Arduino MKR Wifi 1010
Möchten Sie Ihrem Projekt eine WiFi-Schnittstelle hinzufügen? Holen Sie sich das MKR WIFI 1010. Erfahren Sie mehr
