You have no items in your shopping cart.
Search results for 'bit'
-
Contact-less Infrared Thermopile Sensor - TMP007
Contact-less Infrared Thermopile Sensor Breakout - TMP007 Learn More -
Adafruit Si5351A Clock Generator - 8KHz to 160MHz
This chip has a precision 25MHz crystal reference and internal PLL and dividers so it can generate just about any frequency, from <8KHz up to 150+ MHz. Learn More -
Adafruit 3.5" TFT 320x480 + Touchscreen w/MicroSD
This TFT display is big (3.5" diagonal) bright (6 white-LED backlight) and colorful! Learn More -
GPIO Extender Kabel for Raspberry PI F/F (40 Pin) 30cm
2 x 20 Pin Cable Female - Female, Length 30cm Learn More -
Pocket Screwdriver Set
Each Pocket Screwdriver Set offers 7 different chrome vanadium bits, four flathead options and three Phillips head options, that fit snuggly in the quick-change magnetic holder at the tip of the screwdriver. Learn More -
MMA8451 3-Axis Accelerometer Breakout
MMA8451 3-Axis Accelerometer, 14 bit precision Learn More -
Adafruit Quad Alphanumeric Display - Blue, I2C
This is a nice, bright alphanumeric display that shows letters and numbers in a beautiful blue hue. Learn More -
Adafruit Quad Alphanumeric Display - Red, I2C
This is a nice, bright alphanumeric display that shows letters and numbers in a beautiful red hue. Learn More -
Adafruit GEMMA V2 - Miniature wearable electronic platform
Love FLORA but want a bite-sized version? Look no further, GEMMA is a tiny wearable platform board with a lot of might in a 1" diameter package. Powered by a Attiny85 and programmable with an Arduino IDE over USB, you'll be able to realize any wearable project! Learn More -
NeoPixel Diffused 8mm Through-Hole LED - 5 Pack
Each LED looks just like your classic through-hole 8mm RGB LED with 4 legs, but instead of just red/green/blue there's a little chip inside that can control the LED with high speed PWM for 24-bit color. Learn More -
SparkFun MiniGen - Pro Mini Signal Generator Shield
A small shield for the Arduino Pro Mini that is capable of generating sine, square, or triangle waves at up to 3MHz Learn More -
Atmel ATMEGA328P-AU - TQFP
ATMega 328 TQFP-Package. Without Arduino Bootloader! Learn More -
SparkFun Binary Blaster Kit
Binary Blaster is a game designed to help teach what binary numbers are and how to convert from decimal (and hexadecimal) to binary quickly. Learn More -
SparkFun T5403 Barometric Sensor Breakout
This is the T5403 breakout board, a fully calibrated barometric pressure sensor with an I2C interface. Learn More -
Adafruit 2.8" TFT LCD with Touchscreen + MicroSD Socket
2.8" TFT LCD with Touchscreen Breakout Board w/MicroSD Socket Learn More -
GY Digitaler Ambient Light Sensor mit BH1750FVI
Messen Sie die Umgebungslichtstärke von 1 - 65535 Lux via I2C Learn More -
NeoPixel Digital RGB LED Strip 144 LED 2M Black PCB - WS2812
We crammed ALL THE NEOPIXELS into this strip! An unbelievable 144 individually-controllable LED pixels on a flexible PCB. 2 Meters which Black PCB! Learn More.Regular Price: CHF119.90
Special Price CHF109.90
Currently out of stock
-
DK 16-Channel 12-bit PWM/Servo Shield - I2C interface
Using only two I2C pins, control 16 free-running PWM outputs! You can even stack up 62 shields to control up to 992 PWM outputs Learn More -
DK 16-Channel 12-bit PWM/Servo Driver - I2C interface - PCA9685
Erhalten Sie mit nur 2 Pins 16 unabhängige PWM-Ausgänge. Verbinden Sie bis zu 62 dieser Breakouts und erhalten Sie 992 PWM Ausgänge!
Learn More -
JYE 068 Digital Oscilloscope (Kit)
Neuestes JYE Selbstbau-Oszilloskop neu mit 3Mhz Bandbreite Learn More -
Tinkerforge Line Bricklet
Measures the reflectivity of a surface, can be used to detect/follow lines Learn More -
Tinkerforge LED Strip Bricklet
Controls up to 320 RGB LEDs (WS2801) Learn More -
Tinkerforge PTC Bricklet
Precision current sensor, measures currents between 0 and 22.5mA, can read out any IEC 60381-1 type 2 and type 3 sensor Learn More -
Tinkerforge Ethernet Master Extension (with PoE)
Communicate directly with Bricks/Bricklets without Brickd, Supports 10/100 Mbit/s Ethernet (1000 Mbit/s compatible) Learn More -
Tinkerforge RS485 Master Extension
Allows long distance (upto 1200m) cable based interconnection between stacks Learn More -
Tinkerforge Stepper Brick
Drives one bipolar stepper motor with max. 38V and 2.5A per phase - Position, velocity and acceleration controllable Learn More -
Adafruit OLED Breakout Board - 16-bit Color 1.27" + microSD
This OLED uses the SSD1351 driver chip, which manages the display. You can talk to the driver chip using 4-wire write-only SPI (clock, data, chip select, data/command and an optional reset pin). Learn More -
USB zu RS485 Adapter
USB zu RS485 Adapter Learn More -
GPIO Extender Kabel for Raspberry PI F/F (26 Pin)
2 x 13 Pin Cable Female - Female, Length 30cm Learn More -
GPIO Extender Kabel for Raspberry PI M/F (26 Pin)
2 x 13 Pin Cable Male - Female, Length 30cm Learn More
