You have no items in your shopping cart.
Catalog Advanced Search
57 item(s) were found using the following search criteria
- Manufacturer: Tinkerforge
Don't see what you're looking for? Modify your search
-
Tinkerforge Stepper Brick
Drives one bipolar stepper motor with max. 38V and 2.5A per phase - Position, velocity and acceleration controllable Learn More -
Tinkerforge Step-Down Power Supply
Powers a stack of Bricks with 5V, also can power motors of driver Bricks (e.g. DC Brick) Learn More -
Tinkerforge RS485 Master Extension
Allows long distance (upto 1200m) cable based interconnection between stacks Learn More -
Tinkerforge Weather Station Starter Kit
Fully-fledged open source weather station, Measures Temperature, Humidity, Air Pressure and Illuminance Learn More -
Tinkerforge Ethernet Master Extension (with PoE)
Communicate directly with Bricks/Bricklets without Brickd, Supports 10/100 Mbit/s Ethernet (1000 Mbit/s compatible) Learn More -
Tinkerforge Starterkit: Hardware Hacking
Hack any low voltage electronic appliance and make it controllable by PC, smart phone/tablet, Raspberry Pi or over the Internet (Internet of Things). Learn More -
Tinkerforge Bricklet Cable Black 15cm (10p-10p)
Tinkerforge Bricklet Cable Black 15cm Learn More -
Tinkerforge Bricklet Cable Black 50cm (10p-10p)
Tinkerforge Bricklet Cable Black 50cm Learn More -
Tinkerforge Bricklet Cable Black 100cm (10p-10p)
Tinkerforge Bricklet Cable Black 100cm Learn More -
Tinkerforge Bricklet Cable Black 200cm (10p-10p)
Tinkerforge Bricklet Cable Black 200cm Learn More -
Tinkerforge Bricklet Cable Black 6cm (10p-10p)
Tinkerforge Bricklet Cable Black 6cm Learn More -
Tinkerforge PTC Bricklet
Precision current sensor, measures currents between 0 and 22.5mA, can read out any IEC 60381-1 type 2 and type 3 sensor Learn More -
Tinkerforge IO-16 Bricklet
16-channel digital input/output with switchable logic voltage 3.3V or 5V* and configurable pull-ups and interrupts Learn More -
Tinkerforge Mounting Kit 9mm
This kit is intended to mount Bricks with 9mm height Learn More -
Tinkerforge Mounting Kit 12mm
This kit is intended to mount Bricks with 12mm height and Bricklets Learn More -
Tinkerforge Mounting Plate 22x10
The Mounting Plate can be used to mount Bricks and Bricklets on a plate. Learn More -
Tinkerforge LED Strip Bricklet
Controls up to 320 RGB LEDs (WS2801) Learn More -
Tinkerforge Joystick Bricklet
2-axis joystick with push-button Learn More -
Tinkerforge Tilt Bricklet
Detects inclination of Bricklet (tilt switch open/closed) Learn More -
Tinkerforge Line Bricklet
Measures the reflectivity of a surface, can be used to detect/follow lines Learn More -
Tinkerforge Mounting Plate for Line Bricklet
Both plates can mount up to 3 Line Bricklets. Learn More -
Tinkerforge Button Pad
The Button Pad is a 1-contact touch panel for the Multi Touch Bricklet. Learn More -
Tinkerforge Slider Pad
The Slider Pad is a 12-contact touch panel for the Multi Touch Bricklet. Learn More -
Tinkerforge Cursor Pad
The Cursor Pad is a 12-contact touch panel for the Multi Touch Bricklet. Learn More -
Tinkerforge NFC/RFID Bricklet
Can read and write Mifare Classic and NFC Forum Type 1 and 2 RFID/NFC tags Learn More -
Tinkerforge Breakout Bricklet
The Breakout Bricklet is a breakout board for Bricklets. It makes all signals of the Bricklet connector available. Learn More -
Tinkerforge Dual Button Bricklet
The Dual Button Bricklet is equipped with two buttons and can extend Bricks. Learn More -
Tinkerforge Debug Brick
The Debug Brick can be used to add JTAG and serial console debug capabilities to Bricks, Bricklets and stacks. Learn More -
Tinkerforge Starter Kit: Internet of Things
The Starter Kit: Internet of Things offers an easy access into the world of the Internet of Things. It allows to control many devices over the internet. Learn More -
Solid State Relay Heatsink
This heatsink can be used to cool solid state relays if large loads are switched. Learn More